StreamHttpClient.ino

/****************************************************************************************************************************
  StreamHttpClient.ino - Simple Arduino web server sample for Ethernet shield

  For Ethernet shields using WT32_ETH01 (ESP32 + LAN8720)

  WebServer_WT32_ETH01 is a library for the Ethernet LAN8720 in WT32_ETH01 to run WebServer

  Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases
  Built by Khoi Hoang https://github.com/khoih-prog/WebServer_WT32_ETH01
  Licensed under MIT license
 *****************************************************************************************************************************/

#define DEBUG_ETHERNET_WEBSERVER_PORT       Serial

// Debug Level from 0 to 4
#define _ETHERNET_WEBSERVER_LOGLEVEL_       3

#include <WebServer_WT32_ETH01.h>
#include <HTTPClient.h>

// Select the IP address according to your local network
IPAddress myIP(192, 168, 2, 232);
IPAddress myGW(192, 168, 2, 1);
IPAddress mySN(255, 255, 255, 0);

// Google DNS Server IP
IPAddress myDNS(8, 8, 8, 8);

void setup()
{
  Serial.begin(115200);

  while (!Serial);

  // Using this if Serial debugging is not necessary or not using Serial port
  //while (!Serial && (millis() < 3000));

  Serial.print("\nStarting StreamHttpClient on " + String(ARDUINO_BOARD));
  Serial.println(" with " + String(SHIELD_TYPE));
  Serial.println(WEBSERVER_WT32_ETH01_VERSION);

  // To be called before ETH.begin()
  WT32_ETH01_onEvent();

  //bool begin(uint8_t phy_addr=ETH_PHY_ADDR, int power=ETH_PHY_POWER, int mdc=ETH_PHY_MDC, int mdio=ETH_PHY_MDIO,
  //           eth_phy_type_t type=ETH_PHY_TYPE, eth_clock_mode_t clk_mode=ETH_CLK_MODE);
  //ETH.begin(ETH_PHY_ADDR, ETH_PHY_POWER, ETH_PHY_MDC, ETH_PHY_MDIO, ETH_PHY_TYPE, ETH_CLK_MODE);
  ETH.begin(ETH_PHY_ADDR, ETH_PHY_POWER);

  // Static IP, leave without this line to get IP via DHCP
  //bool config(IPAddress local_ip, IPAddress gateway, IPAddress subnet, IPAddress dns1 = 0, IPAddress dns2 = 0);
  ETH.config(myIP, myGW, mySN, myDNS);

  WT32_ETH01_waitForConnect();
}

void loop()
{
  if (WT32_ETH01_isConnected())
  {
    HTTPClient http;

    Serial.print("[HTTP] begin...\n");

    // configure server and url
    http.begin("http://192.168.2.112/test.html");
    //http.begin("192.168.2.112", 80, "/test.html");

    Serial.print("[HTTP] GET...\n");
    // start connection and send HTTP header
    int httpCode = http.GET();

    if (httpCode > 0)
    {
      // HTTP header has been send and Server response header has been handled
      Serial.printf("[HTTP] GET... code: %d\n", httpCode);

      // file found at server
      if (httpCode == HTTP_CODE_OK)
      {
        // get length of document (is -1 when Server sends no Content-Length header)
        int len = http.getSize();

        // create buffer for read
        uint8_t buff[128] = { 0 };

        // get tcp stream
        WiFiClient * stream = http.getStreamPtr();

        // read all data from server
        while (http.connected() && (len > 0 || len == -1))
        {
          // get available data size
          size_t size = stream->available();

          if (size)
          {
            // read up to 128 byte
            int c = stream->readBytes(buff, ((size > sizeof(buff)) ? sizeof(buff) : size));

            // write it to Serial
            Serial.write(buff, c);

            if (len > 0)
            {
              len -= c;
            }
          }

          delay(1);
        }

        Serial.println();
        Serial.print("[HTTP] connection closed or file end.\n");
      }
    }
    else
    {
      Serial.printf("[HTTP] GET... failed, error: %s\n", http.errorToString(httpCode).c_str());
    }

    http.end();
  }

  delay(10000);
}