deps: bump the hickory-dns group with 2 updates

[dependabot]

Bumps the hickory-dns group with 2 updates: hickory-proto and hickory-resolver.

Updates hickory-proto from 0.25.2 to 0.26.0

Release notes

Sourced from hickory-proto's releases.

0.26.0

13 months after the release of 0.25.0, we finally have a bigger feature release of Hickory DNS, the suite of DNS libraries and authoritative/recursive name servers written in pure Rust. A lot of work has gone into this release, so we wanted to take a moment to release this before we continue work on deploying the Hickory DNS recursive resolver at Let's Encrypt (and did you see that Hickory is being used in some of Google's Pixel devices?). Because of the ongoing work, we expect that 0.27.0 might happen quite a bit sooner than in 13 months from now.

These release notes describe a number of high-level improvements as well as API changes that are likely to break a larger fraction of our downstream users. Feedback (both on these notes and the release itself) is always welcome in our issue tracker or via our Discord server.

Most of the following notes are broken up by specific components: the server binary and our library crates. However, for this release we've made several changes to the structure of our crates itself:

• Network protocol support has moved out of the hickory-proto crate, into a new hickory-net crate (#3394); this allows the hickory-proto crate to cleanly focus on message encoding and decoding.
• The hickory-client crate has been subsumed into hickory-net, in the client module (#3366). No future releases of the hickory-client crate are expected.
• The hickory-recursor crate has been merged into hickory-resolver (#3370), guarded by a recursor feature which must be enabled explicitly. The recursor implementation was already tightly coupled to the resolver internals, so keeping it separate didn't really make sense.

Additionally, substantial cross-crate changes have been made to improve our error handling:

• More error handling simplification
• proto: split NetError out of ProtoError
• proto: clean up ProtoError
• Be more strict about decode errors
• resolver: remove unnecessary ResolveError wrapper
• Avoid large errors

hickory-dns (the server binary)

• We've added a number of ways to optimize performance via low-level networking configuration:
  • Use SO_REUSEADDR for tcp sockets
  • Allow configuring UDP socket buffer sizes
  • Add SO_REUSEPORT support with configurable UDP socket count
  • More TCP tuning options
• We further extended and reworked our metrics:
  • Additional recursive resolver metrics
  • Minor metrics tidying
  • Initial histogram metrics support
• Miscellaneous changes:
  • Implement RFC 5001 NSID for authoritative server
  • Add server SSLKEYLOGFILE support
  • Add systemd readiness + watchdog support
  • prometheus: enable gzip compression on metrics endpoint
  • Add support for jemalloc + profiling

hickory-server (the library API)

• The Authority trait was renamed to ZoneHandler and simplified to better reflect its usage:
  • Rename Authority to ZoneHandler
  • Simplify ZoneHandler interface
  • Use concrete type for authority lookups
  • Untangle authorities
• Miscellaneous changes:
  • Support host format in blocklist stores
  • Authenticated AXFR policy, TSIG response signing
  • Add metrics for zone lookups, DNS classes and record types

... (truncated)

Commits

• 6317c5a Bump version to 0.26.0
• 05058c7 Conformance: print communication errors from dig
• a08cbfb Make DigSettings method names more idiomatic
• 8d6db96 Disable dig retries when testing cache behavior
• 167971a Cargo: update semver compat deps
• 35c1ae1 server: inline encode_fallback_servfail_response()
• a073f3a server: use MessageResponse::encode() for more protocols
• f9c5ca9 server: clean up MessageResponse::encode()
• 6fe3003 server: deduplicate response encoding
• add4e7c proto: reject zero-length data for non-update messages
• Additional commits viewable in compare view

Updates hickory-resolver from 0.25.2 to 0.26.0

Release notes

Sourced from hickory-resolver's releases.

0.26.0

13 months after the release of 0.25.0, we finally have a bigger feature release of Hickory DNS, the suite of DNS libraries and authoritative/recursive name servers written in pure Rust. A lot of work has gone into this release, so we wanted to take a moment to release this before we continue work on deploying the Hickory DNS recursive resolver at Let's Encrypt (and did you see that Hickory is being used in some of Google's Pixel devices?). Because of the ongoing work, we expect that 0.27.0 might happen quite a bit sooner than in 13 months from now.

These release notes describe a number of high-level improvements as well as API changes that are likely to break a larger fraction of our downstream users. Feedback (both on these notes and the release itself) is always welcome in our issue tracker or via our Discord server.

Most of the following notes are broken up by specific components: the server binary and our library crates. However, for this release we've made several changes to the structure of our crates itself:

• Network protocol support has moved out of the hickory-proto crate, into a new hickory-net crate (#3394); this allows the hickory-proto crate to cleanly focus on message encoding and decoding.
• The hickory-client crate has been subsumed into hickory-net, in the client module (#3366). No future releases of the hickory-client crate are expected.
• The hickory-recursor crate has been merged into hickory-resolver (#3370), guarded by a recursor feature which must be enabled explicitly. The recursor implementation was already tightly coupled to the resolver internals, so keeping it separate didn't really make sense.

Additionally, substantial cross-crate changes have been made to improve our error handling:

• More error handling simplification
• proto: split NetError out of ProtoError
• proto: clean up ProtoError
• Be more strict about decode errors
• resolver: remove unnecessary ResolveError wrapper
• Avoid large errors

hickory-dns (the server binary)

• We've added a number of ways to optimize performance via low-level networking configuration:
  • Use SO_REUSEADDR for tcp sockets
  • Allow configuring UDP socket buffer sizes
  • Add SO_REUSEPORT support with configurable UDP socket count
  • More TCP tuning options
• We further extended and reworked our metrics:
  • Additional recursive resolver metrics
  • Minor metrics tidying
  • Initial histogram metrics support
• Miscellaneous changes:
  • Implement RFC 5001 NSID for authoritative server
  • Add server SSLKEYLOGFILE support
  • Add systemd readiness + watchdog support
  • prometheus: enable gzip compression on metrics endpoint
  • Add support for jemalloc + profiling

hickory-server (the library API)

• The Authority trait was renamed to ZoneHandler and simplified to better reflect its usage:
  • Rename Authority to ZoneHandler
  • Simplify ZoneHandler interface
  • Use concrete type for authority lookups
  • Untangle authorities
• Miscellaneous changes:
  • Support host format in blocklist stores
  • Authenticated AXFR policy, TSIG response signing
  • Add metrics for zone lookups, DNS classes and record types

... (truncated)

Commits

• 6317c5a Bump version to 0.26.0
• 05058c7 Conformance: print communication errors from dig
• a08cbfb Make DigSettings method names more idiomatic
• 8d6db96 Disable dig retries when testing cache behavior
• 167971a Cargo: update semver compat deps
• 35c1ae1 server: inline encode_fallback_servfail_response()
• a073f3a server: use MessageResponse::encode() for more protocols
• f9c5ca9 server: clean up MessageResponse::encode()
• 6fe3003 server: deduplicate response encoding
• add4e7c proto: reject zero-length data for non-update messages
• Additional commits viewable in compare view

You can trigger a rebase of this PR by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions