updated links

Author: bradleywell

How-To-Contribute.md

@@ -9,13 +9,13 @@ parent: Home
 
 This design guide is a living document, and can always be improved. If after testing a dimension or step in this guide, you find a better dimension or set of steps for a page in the guide, you can raise a github issue to change the dimension in the guide.
 
-To do so, click this link [here change after moving repo](https://github.com/bradleywell/OpenAT-Design-Guide-Test/issues). From here,click on the green 'New issue' button at the top right. Give the issue a title that explains what feature in what part need to be changed (i.e. "Changing threaded hole diameter for #4 sheet metal screw") then fill out the issue description with more information about what you want to change, and why you think it needs changing.
+To do so, click [this link](https://github.com/makersmakingchange/OpenAT_Design_Guide/issues). From here,click on the green 'New issue' button at the top right. Give the issue a title that explains what feature in what part need to be changed (i.e. "Changing threaded hole diameter for #4 sheet metal screw") then fill out the issue description with more information about what you want to change, and why you think it needs changing.
 
 # Adding a new page
 
 If you have something that you think should be added to the design guide, you can create a push request to add a page to the guide.
 
-To do so, click this link [go to the project repository](https://github.com/bradleywell/OpenAT-Design-Guide-Test) to go to the project repository. Create a local copy of the repository, then copy the template.md file. Paste the copy into either the Commercial_Components folder or the Design_Elements_For_3D_Printed_Parts folder, depending on what you want to add to the guide. Once you have copied the template to the correct location, open the file and begin filling it out. The first 6 lines are the header, which gives the page its title, parent page, and navigation order. Change the title from template to something short but descriptive, keep the nav_order at 3, and change the parent to be either Commercial Components or Design Elements for 3D Printed Parts, depending on which folder you put the template in. Finally, fill in the rest of the template. The template was created from a commercial parts page, as that has the most sections, and sections can be removed or modified as needed for a Design Elements page.
+To do so, click [this link](https://github.com/makersmakingchange/OpenAT_Design_Guide) to go to the project repository. Create a local copy of the repository, then copy the template.md file. Paste the copy into either the Commercial_Components folder or the Design_Elements_For_3D_Printed_Parts folder, depending on what you want to add to the guide. Once you have copied the template to the correct location, open the file and begin filling it out. The first 6 lines are the header, which gives the page its title, parent page, and navigation order. Change the title from template to something short but descriptive, keep the nav_order at 3, and change the parent to be either Commercial Components or Design Elements for 3D Printed Parts, depending on which folder you put the template in. Finally, fill in the rest of the template. The template was created from a commercial parts page, as that has the most sections, and sections can be removed or modified as needed for a Design Elements page.
 
 Once you have created the page for your new entry, create a push request for the repository, and an MMC team member will review it and either add it to the guide, give feedback on what needs to be changed before adding it to the guide, or will not add it if the content is deemed inappropriate for the guide.