WIP repeater: poweroff on long press#2883
Conversation
| @@ -1,4 +1,6 @@ | |||
| { | |||
| // See http://go.microsoft.com/fwlink/?LinkId=827846 | |||
There was a problem hiding this comment.
I'll need to remove this ...
was added by pio ... should probably add this file to .gitignore ...
|
seems not to work after sending some commands from LORA ... edit: this only happened to me on TEcho for the moment, maybe some issue specific to this board ... noticed some incoherencies in btn init (pullups or not ...), might also have to do with eink screen refresh will have to check the loop. This does not prevent to poweroff the node as one just need to reboot it before powering off |
This was a screen refresh issue on techo, it has been solved Now I'll check result of compilation |
| // meshcore website | ||
| const char* website = "https://meshcore.io"; | ||
| _display->setColor(DisplayDriver::LIGHT); | ||
| _display->setTextSize(1); |
There was a problem hiding this comment.
We have drawTextCentered() as shorthand for this
There was a problem hiding this comment.
right, and I should know that ;)
I'll try to move the poweroff logic out of the ui (the 3s timeout), to enable a poweroff command that would actually show on the screen that the repeater is powering off
the ui would only initiate the sequence ...
|
_board.powerOff() will not turn off everything including power-hungry GPS module. This PR will help to make your PR works. |
3 participants
changed the button login in repeater to use MomentaryButton as in companion radio
implemented poweroff on long press
tested on TEcho, Thinknode M5 and heltec_v3
should support all repeaters with display
might need some review of all variants to see if it breaks, could support all repeaters with buttons by adding a null display