Setting up

[eli167]

Ok been trying for a few days now, this is my problem first I downloaded ll your files ran the setup.exe

the file name NanoVeraHuesBridgeService.exe did not have a config after it then I added it to it

next what IP do I use, I tried a unused one on my network and it didn't work. then I read a reply from you to another user and changed the ip to this local box

this is the set up

I try to start the service and get this error

do not know where the 10.10.1.26 came from, any help will be great

[eli167]

Ok I was able to start the services next is the device editor, what ip do I put there when I use the 115 like in the set up it shows my example devices please help

[nanowebcoder]

The reason you don’t see a “.config” after the file name is that in Windows Explorer you have the “Hide extensions for known file types” turned on. You can see that because the NanoHuesBridgeService doesn’t have a “.exe” after it, but the file type is listed as Application.

[cid:image001.png@01D1B98C.378B96B0]

You are going to have to rename the file otherwise its real name will be NanoVeraHuesBridgeService.exe.config.config and the service application wont be able to find its configuration.

From: eli167 [mailto:notifications@github.com]
Sent: Sunday, May 29, 2016 8:35 AM
To: nanowebcoder/NanoVeraHuesBridge NanoVeraHuesBridge@noreply.github.com
Subject: [nanowebcoder/NanoVeraHuesBridge] Setting up (#3)

Ok been trying for a few days now, this is my problem first I downloaded ll your files ran the setup.exe

the file name NanoVeraHuesBridgeService.exe did not have a config after it then I added it to it
[image]https://cloud.githubusercontent.com/assets/19634081/15633307/aebdab7c-2577-11e6-90b2-f7d3c89da55c.png
next what IP do I use, I tried a unused one on my network and it didn't work. then I read a reply from you to another user and changed the ip to this local box

this is the set up
[image]https://cloud.githubusercontent.com/assets/19634081/15633324/16063b14-2578-11e6-8ecf-aeb6e81e62e4.png

I try to start the service and get this error

[image]https://cloud.githubusercontent.com/assets/19634081/15633330/27cfe868-2578-11e6-93eb-b8456192040d.png

do not know where the 10.10.1.26 came from, any help will be great

—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHubhttps://github.com//issues/3, or mute the threadhttps://github.com/notifications/unsubscribe/AQjlVDudq9W2lqhjZVOK26vpsYHHVbpBks5qGYgNgaJpZM4IpR-x.

[nanowebcoder]

You need to know the IP of your machine.

From: eli167 [mailto:notifications@github.com]
Sent: Sunday, May 29, 2016 9:22 AM
To: nanowebcoder/NanoVeraHuesBridge NanoVeraHuesBridge@noreply.github.com
Subject: Re: [nanowebcoder/NanoVeraHuesBridge] Setting up (#3)

Ok I was able to start the services next is the device editor, what ip do I put there when I use the 115 like in the set up it shows my example devices please help

—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHubhttps://github.com//issues/3#issuecomment-222360348, or mute the threadhttps://github.com/notifications/unsubscribe/AQjlVDutwR0RCHcTxj7ExFZZKpZgA7EIks5qGZL5gaJpZM4IpR-x.

[eli167]

do not think this is right can not get any information from Vera

log
log.txt

[nanowebcoder]

Need to see a full log and you’ll want to turn up the log level.

To turn up the log level:
Open the NLog.config file
Find the line:
Change it to:

Capture a clean log:
Stop the service
Delete the log file
Restart service
Initiate discovery on Alexa
When Alexa finishes, stop the service
Send the log file.

Be helpful to provide the following info too:
IP Address of the machine running the service
IP Address of your Vera
IP Address of your Echo

From: eli167 [mailto:notifications@github.com]
Sent: Sunday, May 29, 2016 9:53 AM
To: nanowebcoder/NanoVeraHuesBridge NanoVeraHuesBridge@noreply.github.com
Cc: Kevin Casey kcasey@nanoweb.com; Comment comment@noreply.github.com
Subject: Re: [nanowebcoder/NanoVeraHuesBridge] Setting up (#3)

do not think this is right can not get any information from Vera

log
log.txthttps://github.com/nanowebcoder/NanoVeraHuesBridge/files/288362/log.txt

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHubhttps://github.com//issues/3#issuecomment-222361760, or mute the threadhttps://github.com/notifications/unsubscribe/AQjlVJFT-pOgMFEXrfeO6zxLqvK8Gfpnks5qGZorgaJpZM4IpR-x.

[eli167]

log and reply sent waiting for your reply

[nanowebcoder]

Dont see a log file. Was supposed to be attached?

From: eli167 [mailto:notifications@github.com]
Sent: Monday, May 30, 2016 12:03 PM
To: nanowebcoder/NanoVeraHuesBridge NanoVeraHuesBridge@noreply.github.com
Cc: Kevin Casey kcasey@nanoweb.com; Comment comment@noreply.github.com
Subject: Re: [nanowebcoder/NanoVeraHuesBridge] Setting up (#3)

log and reply sent waiting for your reply

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHubhttps://github.com//issues/3#issuecomment-222520750, or mute the threadhttps://github.com/notifications/unsubscribe/AQjlVMGRWLBQrFGBS63i6BXKR8x2fA3bks5qGwotgaJpZM4IpR-x.

[eli167]

Was emailed yesterday I can forwarded if you need
On May 30, 2016 1:38 PM, "nanowebcoder" notifications@github.com wrote:

Dont see a log file. Was supposed to be attached?

From: eli167 [mailto:notifications@github.com]
Sent: Monday, May 30, 2016 12:03 PM
To: nanowebcoder/NanoVeraHuesBridge NanoVeraHuesBridge@noreply.github.com

Cc: Kevin Casey kcasey@nanoweb.com; Comment comment@noreply.github.com

Subject: Re: [nanowebcoder/NanoVeraHuesBridge] Setting up (#3)

log and reply sent waiting for your reply

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub<
https://github.com/nanowebcoder/NanoVeraHuesBridge/issues/3#issuecomment-222520750>,
or mute the thread<
https://github.com/notifications/unsubscribe/AQjlVMGRWLBQrFGBS63i6BXKR8x2fA3bks5qGwotgaJpZM4IpR-x>.

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
#3 (comment),
or mute the thread
https://github.com/notifications/unsubscribe/ASuXoe2I9c29-gyQHLR11qkpebps1kXPks5qGyCsgaJpZM4IpR-x
.

[eli167]

see below

log.txt

[nanowebcoder]

Got this log. However the log file wasn’t the whole log file (if it were, the log file would indicate that the system was starting up, but the first message in the file is a uPNP message).

Based on what’s there the app seems to be working. It’s seeing uPNP messages. But the it’s not seeing an Echo discovery packet (it will contain the phrase “M-SEARCH * HTTP/1.1” ). Or, at least, it didn’t in the portion of the log I received.

You did tell Echo to “discover new devices” right?

What was IP address of echo?

From: eli167 [mailto:notifications@github.com]
Sent: Monday, May 30, 2016 3:24 PM
To: nanowebcoder/NanoVeraHuesBridge NanoVeraHuesBridge@noreply.github.com
Cc: Kevin Casey kcasey@nanoweb.com; Comment comment@noreply.github.com
Subject: Re: [nanowebcoder/NanoVeraHuesBridge] Setting up (#3)

see below

log.txthttps://github.com/nanowebcoder/NanoVeraHuesBridge/files/290004/log.txt

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHubhttps://github.com//issues/3#issuecomment-222544068, or mute the threadhttps://github.com/notifications/unsubscribe/AQjlVB3N_-0pLTN9xlweGPSCBckRau4-ks5qGzlrgaJpZM4IpR-x.

[eli167]

I did tell it to discover but it didn't find anything do you know how to
find the ip of the Echo when I run wire shark I didn't see it, but I know
its connected

On Mon, May 30, 2016 at 5:31 PM, nanowebcoder notifications@github.com
wrote:

Got this log. However the log file wasn’t the whole log file (if it were,
the log file would indicate that the system was starting up, but the first
message in the file is a uPNP message).

Based on what’s there the app seems to be working. It’s seeing uPNP
messages. But the it’s not seeing an Echo discovery packet (it will contain
the phrase “M-SEARCH * HTTP/1.1” ). Or, at least, it didn’t in the portion
of the log I received.

You did tell Echo to “discover new devices” right?

What was IP address of echo?

From: eli167 [mailto:notifications@github.com]
Sent: Monday, May 30, 2016 3:24 PM
To: nanowebcoder/NanoVeraHuesBridge NanoVeraHuesBridge@noreply.github.com

Cc: Kevin Casey kcasey@nanoweb.com; Comment comment@noreply.github.com

Subject: Re: [nanowebcoder/NanoVeraHuesBridge] Setting up (#3)

see below

log.txt<
https://github.com/nanowebcoder/NanoVeraHuesBridge/files/290004/log.txt>

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub<
https://github.com/nanowebcoder/NanoVeraHuesBridge/issues/3#issuecomment-222544068>,
or mute the thread<
https://github.com/notifications/unsubscribe/AQjlVB3N_-0pLTN9xlweGPSCBckRau4-ks5qGzlrgaJpZM4IpR-x>.

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
#3 (comment),
or mute the thread
https://github.com/notifications/unsubscribe/ASuXoYW81ufrqti0h66SCHoboX6GkFxiks5qG1c1gaJpZM4IpR-x
.

[nanowebcoder]

Easiest way is to look in your DHCP server. If you cant identify it in your devices, look in the Alexa app under settings and you can lookup the MAC address of the Echo. Then look in your DHCP for a matching MAC address.

With wireshark, you’d have to be looking for the right packets and then echo would have to be transmitting… bit more challenging.

From: eli167 [mailto:notifications@github.com]
Sent: Monday, May 30, 2016 7:17 PM
To: nanowebcoder/NanoVeraHuesBridge NanoVeraHuesBridge@noreply.github.com
Cc: Kevin Casey kcasey@nanoweb.com; Comment comment@noreply.github.com
Subject: Re: [nanowebcoder/NanoVeraHuesBridge] Setting up (#3)

I did tell it to discover but it didn't find anything do you know how to
find the ip of the Echo when I run wire shark I didn't see it, but I know
its connected

On Mon, May 30, 2016 at 5:31 PM, nanowebcoder <notifications@github.commailto:notifications@github.com>
wrote:

Got this log. However the log file wasn’t the whole log file (if it were,
the log file would indicate that the system was starting up, but the first
message in the file is a uPNP message).

Based on what’s there the app seems to be working. It’s seeing uPNP
messages. But the it’s not seeing an Echo discovery packet (it will contain
the phrase “M-SEARCH * HTTP/1.1” ). Or, at least, it didn’t in the portion
of the log I received.

You did tell Echo to “discover new devices” right?

What was IP address of echo?

From: eli167 [mailto:notifications@github.com]
Sent: Monday, May 30, 2016 3:24 PM
To: nanowebcoder/NanoVeraHuesBridge <NanoVeraHuesBridge@noreply.github.commailto:NanoVeraHuesBridge@noreply.github.com>

Cc: Kevin Casey <kcasey@nanoweb.commailto:kcasey@nanoweb.com>; Comment <comment@noreply.github.commailto:comment@noreply.github.com>

Subject: Re: [nanowebcoder/NanoVeraHuesBridge] Setting up (#3)

see below

log.txt<
https://github.com/nanowebcoder/NanoVeraHuesBridge/files/290004/log.txt>

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub<
https://github.com/nanowebcoder/NanoVeraHuesBridge/issues/3#issuecomment-222544068>,
or mute the thread<
https://github.com/notifications/unsubscribe/AQjlVB3N_-0pLTN9xlweGPSCBckRau4-ks5qGzlrgaJpZM4IpR-x>.

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
#3 (comment),
or mute the thread
https://github.com/notifications/unsubscribe/ASuXoYW81ufrqti0h66SCHoboX6GkFxiks5qG1c1gaJpZM4IpR-x
.

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHubhttps://github.com//issues/3#issuecomment-222564732, or mute the threadhttps://github.com/notifications/unsubscribe/AQjlVBsBvv5HbXq8YRvfKVCQwBiolRIFks5qG2_RgaJpZM4IpR-x.

[eli167]

ok more testing by me, I know the ip address of the echo now, 192.168.1.19 the echo from my Phips bridge. yet each time I do to discover, I don't see any log entries. just so you know my Echo is connected to a secondary AP my machine that has your software is plugged in to my switch, with the hue you need to press the botton in order to pair it, do we need to do anything like that

[nanowebcoder]

Is the secondary AP acting as a router? If so it won't pass the UDP packets

If you run wire shark (on the same network segment as the machine) do you see traffic from echo? If you don't, there's no way the bridge software will see it either

No Need to press a button. The bridge software is always listening unlike the hues bridge which will only listen when the button has been pressed.

On Jun 2, 2016, at 8:49 AM, eli167 <notifications@github.commailto:notifications@github.com> wrote:

ok more testing by me, I know the ip address of the echo now, 192.168.1.19 the echo from my Phips bridge. yet each time I do to discover, I don't see any log entries. just so you know my Echo is connected to a secondary AP my machine that has your software is plugged in to my switch, with the hue you need to press the botton in order to pair it, do we need to do anything like that

You are receiving this because you commented.
Reply to this email directly, view it on GitHubhttps://github.com//issues/3#issuecomment-223281237, or mute the threadhttps://github.com/notifications/unsubscribe/AQjlVGYiwiTKQ1fXxrxWreQX_vhqSDIKks5qHtFKgaJpZM4IpR-x.

[eli167]

The access point is not a router it's just a Cisco ap so I need to see the
traffic with wire shark
On Jun 2, 2016 8:56 AM, "nanowebcoder" notifications@github.com wrote:

Is the secondary AP acting as a router? If so it won't pass the UDP packets

If you run wire shark (on the same network segment as the machine) do you
see traffic from echo? If you don't, there's no way the bridge software
will see it either

No Need to press a button. The bridge software is always listening unlike
the hues bridge which will only listen when the button has been pressed.

On Jun 2, 2016, at 8:49 AM, eli167 <notifications@github.com<mailto:
notifications@github.com>> wrote:

ok more testing by me, I know the ip address of the echo now, 192.168.1.19
the echo from my Phips bridge. yet each time I do to discover, I don't see
any log entries. just so you know my Echo is connected to a secondary AP my
machine that has your software is plugged in to my switch, with the hue you
need to press the botton in order to pair it, do we need to do anything
like that

You are receiving this because you commented.
Reply to this email directly, view it on GitHub<
https://github.com/nanowebcoder/NanoVeraHuesBridge/issues/3#issuecomment-223281237>,
or mute the thread<
https://github.com/notifications/unsubscribe/AQjlVGYiwiTKQ1fXxrxWreQX_vhqSDIKks5qHtFKgaJpZM4IpR-x

.

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
#3 (comment),
or mute the thread
https://github.com/notifications/unsubscribe/ASuXoXExFSpDZikBisAIl1IcvIgTw653ks5qHtMCgaJpZM4IpR-x
.