Add APC Back-UPS ES 850G2

Signed-off-by: Sheogorath <sheogorath@shivering-isles.com>

Author: SISheogorath

APC/APC__Back-UPS_ES_850G2__usbhid-ups__2.8.0__01.dev

@@ -0,0 +1,115 @@
+# DEVICE:URL:REPORT: https://github.com/networkupstools/nut-ddl/pull/40
+
+# DEVICE:COMMENT:
+# Device dump generated by ./nut-ddl-dump.sh on Sat, 16 Mar 2024 15:42:38 +0100
+# DEVICE:EOC
+
+# :; upsc ups
+battery.charge: 100
+battery.charge.low: 10
+battery.charge.warning: 50
+battery.date: 2001/09/25
+battery.mfr.date: 2022/12/13
+battery.runtime: 1572
+battery.runtime.low: 120
+battery.type: PbAc
+battery.voltage: 13.5
+battery.voltage.nominal: 12.0
+device.mfr: American Power Conversion
+device.model: Back-UPS ES 850G2
+device.serial: 5B2250T99999  
+device.type: ups
+driver.name: usbhid-ups
+driver.parameter.pollfreq: 30
+driver.parameter.pollinterval: 2
+driver.parameter.port: auto
+driver.parameter.synchronous: auto
+driver.version: 2.8.0
+driver.version.data: APC HID 0.98
+driver.version.internal: 0.47
+driver.version.usb: libusb-1.0.26 (API: 0x1000109)
+input.sensitivity: medium
+input.transfer.high: 266
+input.transfer.low: 180
+input.voltage: 238.0
+input.voltage.nominal: 230
+ups.beeper.status: enabled
+ups.delay.shutdown: 20
+ups.firmware: 938.a2 .I
+ups.firmware.aux: a2 
+ups.load: 18
+ups.mfr: American Power Conversion
+ups.mfr.date: 2022/12/13
+ups.model: Back-UPS ES 850G2
+ups.productid: 0002
+ups.realpower.nominal: 520
+ups.serial: 5B2250T07387  
+ups.status: OL
+ups.test.result: No test initiated
+ups.timer.reboot: 0
+ups.timer.shutdown: -1
+ups.vendorid: 051d
+
+# DEVICE:COMMENT-BLOCK:FIXME:UPSRW: ups
+# [battery.charge.low]
+# Remaining battery level when UPS switches to LB (percent)
+# Type: STRING
+# Maximum length: 10
+# Value: 10
+#
+# [battery.mfr.date]
+# Battery manufacturing date
+# Type: STRING
+# Maximum length: 10
+# Value: 2022/12/13
+#
+# [battery.runtime.low]
+# Remaining battery runtime when UPS switches to LB (seconds)
+# Type: STRING
+# Maximum length: 10
+# Value: 120
+#
+# [input.sensitivity]
+# Input power sensitivity
+# Type: STRING
+# Maximum length: 10
+# Value: medium
+#
+# [input.transfer.high]
+# High voltage transfer point (V)
+# Type: STRING
+# Maximum length: 10
+# Value: 266
+#
+# [input.transfer.low]
+# Low voltage transfer point (V)
+# Type: STRING
+# Maximum length: 10
+# Value: 180
+#
+# [ups.delay.shutdown]
+# Interval to wait after shutdown with delay command (seconds)
+# Type: STRING
+# Maximum length: 10
+# Value: 20
+# DEVICE:EOC
+
+# DEVICE:COMMENT-BLOCK:FIXME:UPSCMD: ups
+# Instant commands supported on UPS [ups]:
+#
+# beeper.disable - Disable the UPS beeper
+# beeper.enable - Enable the UPS beeper
+# beeper.mute - Temporarily mute the UPS beeper
+# beeper.off - Obsolete (use beeper.disable or beeper.mute)
+# beeper.on - Obsolete (use beeper.enable)
+# load.off - Turn off the load immediately
+# load.off.delay - Turn off the load with a delay (seconds)
+# shutdown.reboot - Shut down the load briefly while rebooting the UPS
+# shutdown.stop - Stop a shutdown in progress
+# test.battery.start.deep - Start a deep battery test
+# test.battery.start.quick - Start a quick battery test
+# test.battery.stop - Stop the battery test
+# test.panel.start - Start testing the UPS panel
+# test.panel.stop - Stop a UPS panel test
+# DEVICE:EOC
+