Skip to content

Commit d07fa90

Browse files
github-actions[bot]github-actions[bot]
committed
Deploy FRAME on release
1 parent aee27e1 commit d07fa90

86 files changed

Lines changed: 3598 additions & 0 deletions

File tree

Some content is hidden

Large Commits have some content hidden by default. Use the searchbox below for content that may be hidden.

‎docs/03_Investigator/02_FRAME/00_Cover_Page.md‎

Lines changed: 120 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,120 @@
1+
# FRAME Microscope System
2+
## Comprehensive Operational Manual
3+
4+
### Fast Rigid Automated Microscope Engine
5+
6+
---
7+
8+
**Version 1.0**
9+
**June 2025**
10+
**English Edition**
11+
12+
---
13+
14+
**openUC2 GmbH**
15+
Jena, Germany
16+
17+
---
18+
19+
## Document Information
20+
21+
| Field | Information |
22+
|-------|-------------|
23+
| **Product Name** | FRAME Microscope System |
24+
| **Model** | Motorized Version |
25+
| **Document Type** | Comprehensive Operational Manual |
26+
| **Document Version** | 1.0 |
27+
| **Publication Date** | June 2025 |
28+
| **Language** | English |
29+
| **Compliance** | CE Marking according to EU Directives |
30+
| **Target Audience** | Research professionals, laboratory technicians, students |
31+
32+
---
33+
34+
## CE Declaration of Conformity
35+
36+
This product complies with the following European Directives and Standards:
37+
38+
- **Directive 2014/30/EU** (Electromagnetic Compatibility)
39+
- **Directive 2014/35/EU** (Low Voltage)
40+
- **Directive 2011/65/EU** (RoHS)
41+
- **IEC 61010-1** (Safety requirements for electrical equipment)
42+
- **EN 55011** (Electromagnetic compatibility)
43+
44+
The CE marking indicates conformity with applicable regulations.
45+
46+
---
47+
48+
## Important Safety Notice
49+
50+
:::error
51+
⚠️ WARNING
52+
53+
Knowledge of this manual is required for safe operation of the instrument.
54+
Please read all safety information before operating the system.
55+
56+
- Follow all safety procedures outlined in Section 1
57+
- Use appropriate personal protective equipment
58+
- Ensure proper training before operation
59+
- Contact technical support if uncertain about any procedure
60+
:::
61+
62+
---
63+
64+
## Copyright and Legal Notice
65+
66+
**© 2025 openUC2 GmbH. All rights reserved.**
67+
68+
This manual is provided for the operation of the FRAME Microscope system. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of openUC2 GmbH, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law.
69+
70+
**Trademarks**: All company and product names mentioned in this manual may be trademarks or registered trademarks of their respective companies.
71+
72+
**Disclaimer**: While every effort has been made to ensure the accuracy of this manual, openUC2 GmbH assumes no responsibility for errors or omissions. Specifications are subject to change without notice.
73+
74+
---
75+
76+
## Contact Information
77+
78+
**openUC2 GmbH**
79+
Hans-Knöll-Str. 6
80+
07745 Jena, Germany
81+
82+
**Technical Support**: hello@openuc2.com (openuc2.discourse.group)
83+
**Sales Information**: sales@openuc2.com
84+
**General Information**: hello@openuc2.com
85+
**Wiki**: https://openuc2.github.io
86+
**Website**: https://openuc2.com
87+
88+
**Phone**: +49 (0) -
89+
90+
91+
## Manual Structure Overview
92+
93+
This comprehensive operational manual is organized into seven main sections:
94+
95+
1. **[Safety and Compliance](./01_Safety_and_Compliance.md)** - Essential safety information and regulatory compliance
96+
2. **[Introduction and Overview](./02_Introduction_and_Overview.md)** - System description and applications
97+
3. **[Technical Specifications](./03_Technical_Specifications.md)** - Detailed system specifications and requirements
98+
4. **[Installation and Setup](./04_Installation_and_Setup.md)** - Complete installation and configuration procedures
99+
5. **[Operation Manual](./05_Operation_Manual.md)** - Comprehensive operating instructions
100+
6. **[Maintenance and Troubleshooting](./06_Maintenance_and_Troubleshooting.md)** - Care, maintenance, and problem resolution
101+
7. **[Appendix](./07_Appendix.md)** - Reference information and additional resources
102+
103+
---
104+
105+
## Quick Start Guide
106+
107+
**For immediate operation after installation:**
108+
109+
1. **Safety First**: Read Section 1 completely before proceeding
110+
2. **System Check**: Verify installation according to Section 4
111+
3. **Basic Operation**: Follow startup procedures in Section 5
112+
4. **Emergency**: Keep emergency contact information readily available
113+
114+
**New Users**: Complete training is strongly recommended before independent operation.
115+
116+
---
117+
118+
**Document Prepared by**: openUC2 Technical Documentation Team
119+
**Date**: June 2025
120+
**Manual ID**: FRAME-OM-EN-v1.0

‎docs/03_Investigator/02_FRAME/01_Safety_and_Compliance.md‎

Lines changed: 146 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,146 @@
1+
# Safety and Compliance
2+
3+
## CE Compliance Declaration
4+
5+
The FRAME Microscopes have been designed, produced and tested in compliance with:
6+
- **DIN EN 61010-1 (IEC 61010-1)** - Safety requirements for electrical measuring, control and laboratory instruments
7+
- **IEC 61010-2-101** - Safety requirements for electrical equipment for measurement, control and laboratory use
8+
- **EC Directive IVDD 98/79/EC** - In Vitro Diagnostic Medical Devices
9+
10+
The instruments meet the requirements and are marked with the **CE** mark.
11+
12+
## Important Safety Information
13+
14+
**Knowledge of this manual is required for the operation of the instrument.** Please make yourself familiar with the contents of this manual and pay special attention to hints concerning safe operation of the instrument.
15+
16+
### Warning and Information Symbols
17+
18+
The following warning and information symbols are used throughout this manual:
19+
20+
#### ⚠️ **WARNING**
21+
This symbol indicates critical safety information that must be observed under all circumstances to prevent injury to personnel.
22+
23+
#### ⚠️ **CAUTION**
24+
This symbol indicates potential hazards to the instrument or instrument system that could result in equipment damage.
25+
26+
#### 🔥 **HOT SURFACE**
27+
This symbol warns of hot surfaces that may cause burns. Allow components to cool before handling.
28+
29+
#### ☀️ **UV RADIATION**
30+
This symbol warns of ultraviolet radiation emission. Use appropriate eye protection and avoid direct exposure.
31+
32+
#### ⚡ **ELECTRICAL HAZARD**
33+
This symbol warns of electrical hazards. Ensure proper grounding and follow electrical safety procedures.
34+
35+
## General Safety Precautions
36+
37+
### Electrical Safety
38+
39+
1. **Power Supply**: Ensure the power supply voltage matches the instrument specifications and your country's requirements (e.g. 230V vs 115V)
40+
2. **Electrical Connections**: Ensure all electrical connections are secure and dry
41+
3. **Service**: Do not attempt to service electrical components unless qualified. Reach out to support@openuc2.com or write in our forum openuc2.discourse.group
42+
43+
### Optical Safety
44+
45+
1. **UV Protection**: When using UV illumination sources:
46+
- Wear appropriate UV-blocking safety glasses
47+
- Avoid direct eye exposure to UV light
48+
- Ensure proper ventilation in the work area
49+
50+
2. **Laser Safety** (if applicable, see later also laser safety chapter):
51+
- Follow all applicable laser safety regulations
52+
- Use appropriate laser safety eyewear
53+
- Post appropriate warning signs
54+
55+
3. **High-Intensity Light Sources**:
56+
- Avoid looking directly into high-intensity light sources
57+
- Use appropriate neutral density filters when necessary
58+
59+
### Mechanical Safety
60+
61+
1. **Moving Parts**: Keep hands and loose clothing away from moving parts
62+
2. **Sample Handling**: Use appropriate tools when handling samples
63+
3. **Weight**: Use proper lifting techniques when moving the microscope (~20Kg)
64+
4. **Sharp Edges**: Be aware of sharp edges on optical components and mounts
65+
5. **Rapid Prototyping**: Customize optical systems
66+
67+
### Chemical Safety
68+
69+
1. **Sample Preparation**: Follow appropriate chemical safety procedures when preparing samples
70+
2. **Cleaning Solvents**: Use only recommended cleaning solvents and follow safety data sheets
71+
3. **Ventilation**: Ensure adequate ventilation when using volatile substances
72+
73+
## Environmental Conditions
74+
75+
### Operating Environment
76+
77+
- **Temperature**: 15°C to 35°C (59°F to 95°F)
78+
- **Humidity**: 30% to 80% relative humidity, non-condensing
79+
- **Altitude**: Up to 2000m above sea level
80+
- **Pollution Degree**: 2 (normal laboratory environment)
81+
82+
### Storage Environment
83+
84+
- **Temperature**: -10°C to 60°C (14°F to 140°F)
85+
- **Humidity**: 10% to 95% relative humidity, non-condensing
86+
87+
## Intended Use
88+
89+
The FRAME Microscope is intended for:
90+
91+
- **Primary Use**: Research and industrial microscopy applications
92+
- **User Environment**: Laboratory and research facilities
93+
- **Operator Qualification**: Trained personnel familiar with microscopy techniques
94+
- **Sample Types**: Biological, material science, and industrial samples suitable for optical microscopy
95+
- **Sample Shapes**: Multiwell plates, standard microscopy slides, petri dishes, custom sample holders
96+
97+
### Contraindications
98+
99+
The FRAME Microscope is **NOT** intended for:
100+
- Direct medical diagnosis without proper validation
101+
- Use by untrained personnel
102+
- Operation in hazardous environments (explosive atmospheres, etc.)
103+
- Use with samples that may damage optical components
104+
105+
## Regulatory Information
106+
107+
- **RoHS Directive 2011/65/EU**: Restriction of hazardous substances
108+
- **WEEE Directive 2012/19/EU**: Waste electrical and electronic equipment
109+
110+
### Patent Information
111+
112+
Certain components of the FRAME system may be covered by patents. For current patent information, please contact us via hello@openuc2.com. We ensure that the vast majority of the designs remain open-source.
113+
114+
## Warranty Limitations
115+
116+
- The warranty is void if safety instructions are not followed
117+
- Modifications to the instrument without authorization void the warranty
118+
- Environmental conditions outside specified ranges void the warranty
119+
- Use of non-approved accessories or components void the warranty
120+
121+
## Emergency Procedures
122+
123+
### Electrical Emergency
124+
1. Immediately disconnect power at the main switch
125+
2. Do not touch exposed electrical components
126+
3. Contact qualified service personnel
127+
128+
### Fire Emergency
129+
1. Disconnect power immediately
130+
2. Use appropriate fire extinguisher
131+
3. Evacuate area if necessary
132+
133+
### Chemical Spill
134+
1. Follow laboratory chemical spill procedures
135+
2. Ensure adequate ventilation
136+
3. Clean affected areas according to safety data sheets
137+
138+
---
139+
140+
**For technical support and service:** support@openuc2.com
141+
142+
**Emergency Contact:** +49 (0) XXXX XXXXXX
143+
144+
---
145+
146+
*Last updated: June 2024*

0 commit comments

Comments
 (0)