Update 04_Installation_and_Setup.md

Author: Mikrodoktor

docs/03_Investigator/02_FRAME/04_Installation_and_Setup.md

@@ -21,15 +21,21 @@ Before beginning installation, ensure you have:
 *Take Case wrapped in bubble foil out of cardboard box.*
 
 ![](./IMAGES/04/case-closed.jpg)
-*Case that holds the Frame inside with bubble foil removed.*
+*Case, that holds the FRAME inside, with bubble foil removed.*
 
 ![](./IMAGES/04/FRAME-in-open-case.jpeg)
 *Carefully open the case and ensure that there is no outer damage to the package. Store this case carefully and reuse it if necessary - it's a great suit case :)*
 
+![](./IMAGES/04/Transport-lock-on-top-of-FRAME.jpeg)
+![](./IMAGES/04/Transport-lock.jpeg)
+*Remove the Transport lock on top of the FRAME.* 
 
-![](./IMAGES/04/FRAME_Manual_2.jpeg)
+![](./IMAGES/04/FRAME-in-open-case+parts.jpeg)
 *The FRAME is covered with packaging material, foam and bubble foil, unwrap the parts and take out the components, starting with the smaller parts, including the illumination arm. The FRAME body itself is very heavy, so please make sure you get additional support and move the box out of the suitcase carefully. Hold it from the lower end* **don't lift it holding the Z-stage!**, *put this on a surface that is decently stable!*
 
+![](./IMAGES/04/Transport-protection-within-stage.jpeg)
+**Don't forget to remove all foam parts inside the stage.** 
+
 ## Frame Positioning and Setup
 
 ### Initial Frame Positioning