You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
32
+
33
+
```{admonition} Older screenshot
34
+
:class: note
35
+
The screenshot above is from an earlier **AAPS** version — in **AAPS** 4 the graphs look slightly different, but the **COB** graph carries the same information.
36
+
```
32
37
33
38
34
39
## Carbs Sensitivity - WeightedAverage
@@ -50,7 +55,7 @@ Ordinarily __AAPS__ detects carb absorption through **BG** deviations. In case t
50
55
51
56
52
57
53
-
In the screenshot above, 58% of time the carb absorption was calculated by the min_5m_carbimpact instead of the value detected from deviations. This indicates that the user may have had less **COB** than calculated by the algorithm.
58
+
In the screenshot above (from an earlier **AAPS** version — the confirmation dialog looks slightly different in **AAPS** 4, but shows the same warning), 58% of time the carb absorption was calculated by the min_5m_carbimpact instead of the value detected from deviations. This indicates that the user may have had less **COB** than calculated by the algorithm.
54
59
55
60
### How to deal with this warning?
56
61
@@ -71,22 +76,23 @@ This could be because:
71
76
72
77
## Manual correction of carbs entered
73
78
74
-
If carbs are over or underestimated carbs this can be corrected through the Treatments tab and actions tab / menu as described [here](#screens-bolus-carbs).
79
+
If carbs are over or underestimated this can be corrected through the **Treatments history** screen as described [here](#screens-bolus-carbs).
75
80
76
81
77
82
## Carb correction - how to delete a Carb entry from Treatments
78
83
79
84
80
-
The ‘Treatments’ tab can be used to correct a faulty carb entry by deleting the entry in Treatments. This may be because the user over or underestimated the carb entry:
85
+
The **Treatments history** screen can be used to correct a faulty carb entry by deleting it. This may be because the user over or underestimated the carb entry:
83
88
84
89
1. Check and remember actual **COB** and **IOB** on the **AAPS'** homescreen.
85
-
2. Depending on the pump, the carbs in the Treatments tab might show together with insulin in one line or as a separate entry (i.e. with Dana RS).
86
-
3. Remove the entry by firstly 'ticking' the waste bin on the top right corner (see above photo, step 1). Then 'tick' the faulty carb amount (see above photo, step 2). Then 'tick' the ‘waste bin’ on the top right corner (step 1 again).
87
-
4. Make sure carbs are removed successfully by checking **COB** on **AAPS’** homescreen again.
88
-
5. Do the same for **IOB** if there is just one line in the Treatment tab including carbs and insulin.
89
-
6. If carbs are not removed as intended and additional carbs are added as explained in this section, the **COB** entry will be too high and this could lead to **AAPS** delivering too much insulin.
90
-
7. Enter correct carbs amount through carbs button on **AAPS’** homescreen and set the correct event time.
91
-
8. If there is just one line in Treatment tab including carbs and insulin the user should add also the amount of insulin. Make sure to set the correct event time and check **IOB** on homescreen after confirming the new entry.
90
+
2. Open **Treatments history** (drawer menu → *Treatments history*), tab **Carbs and bolus**. Depending on the pump, the carbs might show together with insulin in one line or as a separate entry (i.e. with Dana RS).
91
+
3.**Long-press** the faulty carb entry — the list switches to **selection mode** with a checkbox on every line, and the entry is ticked (marked **1** above). Tick any further entries you want to remove as well.
92
+
4. Tap the **🗑 Delete** icon in the top bar (marked **2**) and confirm — the confirmation dialog lists exactly what will be removed.
93
+
5. Make sure carbs are removed successfully by checking **COB** on **AAPS’** homescreen again.
94
+
6. Do the same for **IOB** if there is just one line including carbs and insulin.
95
+
7. If carbs are not removed as intended and additional carbs are added as explained in this section, the **COB** entry will be too high and this could lead to **AAPS** delivering too much insulin.
96
+
8. Enter the correct carbs amount through the **Carbs** dialog (**Treatments** → **Carbs**) and set the correct event time.
97
+
9. If there was just one line including carbs and insulin the user should also re-add the amount of insulin. Make sure to set the correct event time and check **IOB** on the homescreen after confirming the new entry.
0 commit comments