Extend into pumps

And stop here for lack of physical pumps

Author: psonnera

docs/EN/CompatiblePumps/DanaRS-Insulin-Pump.md

@@ -25,7 +25,7 @@ _These instructions are for configuring the app and your pump if you have a Dana
 * In the pump section select 'Dana-i/RS'.
 * Click on the gear wheel to get directly to the pump settings or return to the main screen.
 
-  ![AAPS config builder Dana-i/RS](../images/DanaRS_i_ConfigB.png)
+  ![Configuration > Pump with the Dana-i/RS plugin](../images/v4/Configuration/configuration_pump_list_1.png)
 
 * Open the pump screen (**Manage → Pump**).
 * Select preferences menu by tapping the 3 dots in the top right. 

docs/EN/CompatiblePumps/DiaconnG8.md

@@ -14,11 +14,11 @@
 
 - Click on the **menu** (☰) in the top left corner.
 
-![image](../images/DiaconnG8/DiaconnG8_01.jpg)
+![The menu with the Configuration entry](../images/v4/Configuration/configuration_menu.png)
 
 - Click on **Configuration**.
 
-![image](../images/DiaconnG8/DiaconnG8_02.jpg)
+![Configuration > Pump with the Diaconn G8 plugin](../images/v4/Configuration/configuration_pump_list_2.png)
 
 - After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).
 

docs/EN/CompatiblePumps/EOPatch2.md

@@ -20,13 +20,13 @@ The smallest injectable dose of insulin when using the patch is 0.05 U. The Prof
 1. Press the Back key to return to the main screen.
 
 
-![Image1](../images/EOPatch/Bild1.png)
-![Image2](../images/EOPatch/Bild2.png)
+![The menu with the Configuration entry](../images/v4/Configuration/configuration_menu.png)
+![Configuration > Pump with the EOPatch2 plugin](../images/v4/Configuration/configuration_pump_list_2.png)
 
 ## Settings
 Open the pump screen with **Manage → Pump** (or **Configuration → Pump → Open plugin**).
 
-Select the EOPatch2 Preferences menu by clicking the three dots in the upper right corner.
+Open the EOPatch2 preferences by pressing the **Settings** (gear) icon in the upper right corner.
 
 The EOPatch2 Preferences menu offers a menu to set 3 types of notifications.
 
@@ -39,27 +39,27 @@ This is a reminder to notify you of the time remaining before the current patch
 ### Patch buzzer Reminder
 This is a reminder function for injections other than basal injection. If you are using an (extended) bolus injection or a temporary basal injection, the patch will make a buzzer sound when the injection starts and when the injection is complete. The initial setting value is Off.
 
-![Image3](../images/EOPatch/Bild3.png)
+![EOPatch2 preferences](../images/v4/Pumps/eopatch_settings.png)
 
 ## Connecting the Patch 
 
 ### Move to patch connection screen
 
-Open the pump screen (**Manage → Pump**) and click the ACTIVATE PATCH button at the bottom left.
+Open the pump screen (**Manage → Pump**) and press the **Activate Patch** button at the bottom left.
 
-![Image4](../images/EOPatch/Bild4.png)
+![The EOPatch2 pump screen with the Activate Patch button](../images/v4/Pumps/eopatch_pump_screen.png)
 
 ### Connecting the patch
 Insert the syringe needle into the insulin inlet on the patch and then slowly push the piston to inject the insulin. When insulin is filled with more than 80U, the patch makes a booting sound (1 buzzer) and boots.
-After confirming the buzzer sound, click the START PAIRING button on the screen.
+After confirming the buzzer sound, click the **Start pairing** button on the screen.
 
 [Warning]
 
 - Do not turn the needle action lever until instructed. It can cause serious problems during injection or safety checks otherwise.
 - The amount of insulin that can be injected into the patch is 80~200U. If you inject less than 80U into the patch initially, the patch will not work.
 - Take the insulin to be put into the patch from the refrigerator and leave it at room temperature for 15 to 30 minutes beforehand. The temperature of the insulin to be injected must be at least 10°C.
 
-![Image5](../images/EOPatch/Bild5.png)
+![The Filling Insulin step with the Start pairing button](../images/v4/Pumps/eopatch_activate_filling.png)
 
 ### patch pairing
 The Patch pairing screen will be displayed, and pairing will be attempted automatically. If communication is successful, the Bluetooth pairing request notification appears. Click OK and when the Bluetooth pairing request notification appears a second time with the authentication code, select OK again.

docs/EN/CompatiblePumps/MedtrumNano.md

@@ -67,7 +67,7 @@ On the top-left hand corner **menu** (☰) select **Configuration**\ ➜\ **Pump
 
 You can then open the Medtrum overview (pump screen) at any time with **Open plugin** (or **Manage → Pump**) to access the Medtrum commands when using AAPS.
 
-![Config Builder](../images/medtrum/ConfigBuilder.png)
+![Configuration > Pump with the Medtrum plugin](../images/v4/Configuration/configuration_pump_list_2.png)
 
 ### Step 2: Change Medtrum settings
 
@@ -250,7 +250,7 @@ Press **OK** to return to main screen.
 
 ### Deactivate patch
 
-To deactivate a currently active patch, go to the [Medtrum TAB](#nano-overview) in the AAPS interface and press the **Change Patch** button.
+To deactivate a currently active patch, go to the [Medtrum pump screen](#nano-overview) (**Manage → Pump**) and press the **Change Patch** button.
 
 ![Deactivate patch](../images/medtrum/activation/DeactivatePatch.png)
 
@@ -268,7 +268,7 @@ Once deactivation is complete, press **OK** to return to main screen or press **
 
 ### Resume interrupted activation
 
-If a patch activation is interrupted, for instance because the phone battery runs out, you can resume the activation process by going to the [Medtrum TAB](#nano-overview) in the AAPS interface and press the **Change Patch** button.
+If a patch activation is interrupted, for instance because the phone battery runs out, you can resume the activation process by going to the [Medtrum pump screen](#nano-overview) (**Manage → Pump**) and press the **Change Patch** button.
 
 ![Resume interrupted activation](../images/medtrum/activation/ActivationInProgress.png)
 

docs/EN/CompatiblePumps/OmnipodDASH.md

@@ -103,19 +103,19 @@ When in doubt you can also select “Virtual Pump” and select “DASH” later
 
 On an existing installation you can select the **DASH** pump from the **Configuration** screen:
 
-On the top-left hand corner **menu** (☰) select **Configuration (1)** ➜ **Pump** ➜ **Dash** ➜ **Settings Gear (3)** by selecting the **radio button (2)** titled **Dash**. 
+On the top-left hand corner **menu** (☰) select **Configuration** ➜ **Pump** ➜ **Dash** by selecting the **radio button** titled **Dash**. 
 
-You can then open the DASH pump screen at any time with **Open plugin** (or **Manage → Pump**) to access the DASH commands when using **AAPS**. 
+![The Dash plugin enabled in Configuration > Pump](../images/v4/Pumps/dash_enabled.png)
 
-**NOTE:** A faster way to access the [**Dash settings**](#omnipod-dash-settings) can be found below in the DASH settings section of this document.
+You can then open the DASH pump screen at any time with **Open plugin** (or **Manage → Pump**) to access the DASH commands when using **AAPS**:
 
-![Enable_Dash_3](../images/DASH_images/Enable_Dash/Enable_Dash_3.png)
+![The DASH pump screen without an active pod](../images/v4/Pumps/dash_pump_screen.png)
 
-### Verification of Omnipod Driver Selection
+**NOTE:** A faster way to access the [**Dash settings**](#omnipod-dash-settings) can be found below in the DASH settings section of this document.
 
-To verify that you have selected the DASH in **AAPS**, open **Manage → Pump**: you should see the DASH pump screen. 
+### Verification of Omnipod Driver Selection
 
-![Enable_Dash_4](../images/DASH_images/Enable_Dash/Enable_Dash_4.jpg)
+To verify that you have selected the DASH in **AAPS**, open **Manage → Pump**: you should see the DASH pump screen shown above.
 
 ## Dash Configuration
 
@@ -404,11 +404,11 @@ Below is describes the purpose of each icon on the **Pod Management** menu, acce
 
 ## Dash Settings
 
-The Dash driver settings are configurable from the top-left hand corner **menu** (☰) under **Configuration (1)** ➜ **Pump** ➜ **Dash** ➜ **Settings Gear (3)** by selecting the **radio button (2)** titled **Dash**. You can open the DASH pump screen at any time with **Open plugin** (or **Manage → Pump**).
+The Dash driver settings are configurable from the top-left hand corner **menu** (☰) under **Configuration** ➜ **Pump** ➜ **Dash** ➜ **Settings**. The settings are grouped into expandable sections:
 
-![Dash_settings_1](../images/DASH_images/Enable_Dash/Enable_Dash_3.png)
+![The Dash settings](../images/v4/Pumps/dash_settings.png)
 
-***NOTE:** A faster way to access the **Dash settings** is by accessing the **3 dot menu (1)** in the upper right hand corner of the **DASH** tab and selecting **Dash preferences (2)** from the dropdown menu.*
+***NOTE:** A faster way to access the **Dash settings** is by pressing the **Settings** (gear) icon in the upper right hand corner of the DASH pump screen.*
 
 ![Dash_settings_3](../images/DASH_images/Dash_settings/Dash_settings_3.png)
 

docs/EN/CompatiblePumps/OmnipodEros.md

@@ -77,11 +77,11 @@ Detailed steps on how to setup your pod communication device are listed below in
 
 ### Option 2: The Configuration screen
 
-Via the top-left hand corner **menu** (☰) under **Configuration (1)** ➜**Pump**➜**Omnipod** by selecting the **radio button (2)** titled **Omnipod**. You can then open the Omnipod pump screen at any time with **Open plugin** (or **Manage → Pump**). This is referred to in this documentation as the **Omnipod (POD)** tab.
+Via the top-left hand corner **menu** (☰) under **Configuration** ➜**Pump**➜**Omnipod** by selecting the **radio button** titled **Omnipod**. You can then open the Omnipod pump screen at any time with **Open plugin** (or **Manage → Pump**). This is referred to in this documentation as the **Omnipod (POD)** tab.
 
 > **NOTE:** A faster way to access the **Omnipod settings** can be found below in the [Omnipod Settings section](#OmnipodEros-omnipod-settings) of this document.
 >
-> ![Enable_Omnipod_Driver_3](../images/omnipod/Enable_Omnipod_Driver_3.png) ![Enable_Omnipod_Driver_4](../images/omnipod/Enable_Omnipod_Driver_4.png)
+> ![Configuration > Pump with the Omnipod plugin](../images/v4/Configuration/configuration_pump_list_1.png)
 
 ### Verification of Omnipod Driver Selection