Indicate that LaTeX editor support was removed in Redwood.

Resolves #765

Author: sarina

source/educators/how-tos/course_development/exercise_tools/create_problem_in_latex.rst

@@ -5,47 +5,7 @@ Problem Written in LaTeX
 
 .. tags:: educator, how-to
 
-.. warning:: This problem type is a prototype, and is not supported. By
- default, the ability to create these problems is not enabled in Studio. You
- must change the advanced settings in your course before you can create
- problems with LaTeX. Use this problem type with caution.
-
-If you have an problem that is already written in LaTeX, you can use this
-problem type to easily convert your code into XML. After you paste your code
-into the LaTeX editor, you make a few adjustments.
-
-.. note:: If you want to use LaTeX to typeset mathematical expressions
-          in problems that you haven't yet written, use any of the other
-          problem templates together with `MathJax <http://www.mathjax.org>`_.
-          For more information about how to create mathematical expressions in
-          Studio using MathJax, see :ref:`MathJax in Studio`.
-
-.. image:: /_images/educator_how_tos/ProblemWrittenInLaTeX.png
- :alt: Image of a problem written in LaTeX
-
-Create a Problem Written in LaTeX
-*********************************
-
-To create a problem written in LaTeX, follow these steps.
-
-#. Enable the policy key in your course.
-
-   #. In Studio, click **Settings**, and then click **Advanced Settings**.
-   #. In the field for the **Enable LaTeX Compiler** policy key, change
-      **false** to **true**.
-   #. At the bottom of the page, click **Save Changes**.
-
-#. In the unit where you want to create the problem, click **Problem**
-   under **Add New Component**, and then click the **Advanced** tab.
-#. Click **Problem Written in LaTeX**.
-#. In the component editor that appears, click **Edit**.
-#. In the lower left corner of the component editor, click **Launch
-   LaTeX Source Compiler**.
-#. Replace the example code with your own code. You can also upload a Latex
-   file into the editor from your computer by clicking **Upload** in the bottom
-   right corner.
-#. In the lower left corner of the LaTeX source compiler, click **Save &
-   Compile to Open edX XML**.
+.. warning:: LaTeX editor support was removed with the rollout of the new Course Authoring-based Text Editor in the Redwood release.
 
 .. seealso::
 
@@ -58,8 +18,6 @@ To create a problem written in LaTeX, follow these steps.
 
  :ref:`Award Partial Credit in a Numerical Input Problem` (how-to)
 
- :ref:`Work with Latex Code` (how-to)
-
  :ref:`Manage Numerical Input Problem` (how-to)
 
 
@@ -68,5 +26,5 @@ To create a problem written in LaTeX, follow these steps.
 +--------------+-------------------------------+----------------+--------------------------------+
 | Review Date  | Working Group Reviewer        |   Release      |Test situation                  |
 +--------------+-------------------------------+----------------+--------------------------------+
-|              |                               |                |                                |
+| 2025-04-1    | sarina                        | Sumac          | Pass                           |
 +--------------+-------------------------------+----------------+--------------------------------+

source/educators/how-tos/course_development/exercise_tools/manage_full_screen_image.rst

@@ -91,8 +91,6 @@ Create a Full Screen Image
 
  :ref:`Work with HTML code` (how-to)
 
- :ref:`Work with Latex Code` (how-to)
-
 
 **Maintenance chart**
 

source/educators/how-tos/course_development/text_components/manage_html.rst

@@ -72,8 +72,6 @@ the HTML content in your course.
 
  :ref:`Manage the Full Screen Image Tool` (how-to)
 
- :ref:`Work with Latex Code` (how-to)
-
 
 **Maintenance chart**
 

source/educators/how-tos/course_development/text_components/manage_latex.rst

@@ -5,78 +5,7 @@ Work with LaTeX Code
 
 .. tags:: educator, how-to
 
-.. note:: LaTeX editor support was removed with the rollout of the new Course Authoring-based Text Editor in the Redwood release.
-
-
-.. ==========================
-.. Enable the LaTeX Processor
-.. ==========================
-
-.. The LaTeX processor is not enabled by default. To enable it, you have to change
-.. the advanced settings in your course.
-
-.. #. In Studio, select **Settings**, and then select **Advanced Settings**.
-
-.. #. In the field for the **Enable LaTeX Compiler** policy key, change **false**
-   to **true**.
-
-.. #. At the bottom of the page, select **Save Changes**.
-
-.. ==============================================
-.. Add a Text Component that Contains LaTeX Code
-.. ==============================================
-
-.. When the LaTeX processor is enabled, you can create a Text component that
-.. contains LaTeX code.
-
-.. #. In the unit where you want to create the component, select **Text** under
-   **Add New Component**, and then select **E-text Written in LaTeX**. The new
-   component is added to the unit.
-
-.. #. Select **Edit** to open the new component.
-
-.. #. At the bottom of the component editor, select **Launch Latex Source
-   Compiler**.
-
-   The LaTeX editor opens.
-
-   .. image:: /_images/educator_how_tos/HTML_LaTeXEditor.png
-    :alt: The LaTeX editor.
-    :width: 500
-
-.. #. Add your LaTeX code. To do this, complete either of the following
-   procedures.
-
-   * In the **High Level Source Editing** field, add your LaTeX code.
-
-   * To upload a LaTeX file from your computer, select **Upload**.
-
-.. #. Select **Save & Compile to edX XML**.
-
-.. #. On the unit page, select **Preview** to verify that your content looks
-   correct in the LMS.
-
-   If you see errors, go back to the unit page. Select **Edit** to open the
-   component again, and then select **Launch Latex Source Compiler** to edit
-   the LaTeX code.
-
-.. _import latex code:
-
-.. ****************************************
-.. Import LaTeX Code into a Text Component
-.. ****************************************
-
-.. You can import LaTeX code into a Text component. You might do this, for
-.. example, if you want to create "beautiful math" such as the math in the
-.. following image.
-
-.. .. image:: /_images/educator_how_tos/HTML_LaTeX_LMS.png
-.. :alt: Math formulas created with LaTeX in a Text component.
-
-.. .. warning::
-..    The LaTeX processor that Studio uses to convert LaTeX code to XML is a third
-..    party tool. We recommend  you use this feature with caution. If you use
-..    the tool, make sure you work with your partner manager.
+.. warning:: LaTeX editor support was removed with the rollout of the new Course Authoring-based Text Editor in the Redwood release.
 
 .. seealso:: 
 
@@ -95,5 +24,5 @@ Work with LaTeX Code
 +--------------+-------------------------------+----------------+--------------------------------+
 | Review Date  | Working Group Reviewer        |   Release      |Test situation                  |
 +--------------+-------------------------------+----------------+--------------------------------+
-|              |                               |                |                                |
+| 2025-04-13   |  sarina                       |   Sumac        |  Pass                          |
 +--------------+-------------------------------+----------------+--------------------------------+

source/educators/how-tos/course_development/text_components/manage_text.rst

@@ -45,7 +45,6 @@ When you use the visual editor, you can also perform the following tasks.
 
 * :ref:`Add a Link in a Text Component`
 * :ref:`Add an Image to a Text Component`
-* :ref:`Import LaTeX Code<import latex code>`
 
 .. _Add an Image to a Text Component:
 
@@ -412,8 +411,6 @@ Visual and Raw editor types once selected.
 
  :ref:`Manage the Full Screen Image Tool` (how-to)
 
- :ref:`Work with Latex Code` (how-to)
-
 
 **Maintenance chart**
 

source/educators/olx/problem-xml/symbolic_response.rst

@@ -31,7 +31,7 @@ This is a partial list of features, to be revised over time.
 
       It's a bit of a pain to enter that.
 
-    * The script-style math variant. What would be outputted in latex if you
+    * The script-style math variant. What would be outputted in LaTeX if you
       entered ``\mathcal{N}``. This is used in some variables.
 
       An example::