HamClock Client usage:
hamclock [options]
The following command line options are defined:
-0 : restore all original default Setup values
-a x : set debug name=level, bogus name gives list
-b h : set backend host:port to h; default is clearskyinstitute.com:80
-d d : set working directory to d; default is ~/.hamclock/
-e p : set RESTful web server port to p or -1 to disable; default is 8080
-f o : force display full screen initially to "on" or "off"
-g : init DE using geolocation with current public IP; requires -k
-h : print this help summary then exit
-i i : init DE using geolocation with IP i; requires -k
-k : start in normal mode, ie, don't offer Setup or wait for Skips
-l l : set Mercator or Robinson center longitude to l degrees, +E; requires -k
-m : enable demo mode
-n t : set live web idle timeout to t minutes; default forever
-o : write diagnostic log to stdout instead of in ~/.hamclock/
-p f : require passwords in file f formatted as lines of "category password"
changeUTC configurations exit newde newdx reboot restart setup shutdown unlock upgrade
-q : ignore saved startup screen location and size
-r p : set read-only live web server port to p or -1 to disable; default 8082
-s d : start time as if UTC now is d formatted as YYYY-MM-DDTHH:MM:SS
-t p : throttle max cpu to p percent; default is 80
-v : show version info then exit
-w p : set read-write live web server port to p or -1 to disable; default 8081
-x n : set n max live web connections; max 100; default 10
-y : activate keyboard cursor control arrows/hjkl/Return -- beware stuck keys!
All derivative or compatible HamClock Clients are encouraged to use the same command-line options where applicable.