OCPBUGS-87330: Updating csi-driver-manila-container image to be consistent with ART for 5.0

[openshift-bot]

Updating csi-driver-manila-container image to be consistent with ART for 5.0
TLDR:
Product builds by ART can be configured for different base and builder images than corresponding CI
builds. This automated PR requests a change to CI configuration to align with ART's configuration;
please take steps to merge it quickly or contact ART to coordinate changes.

The configuration in the following ART component metadata is driving this alignment request:
csi-driver-manila.yml.

Detail:

This repository is out of sync with the downstream product builds for this component. The CI
configuration for at least one image differs from ART's expected product configuration. This should
be addressed to ensure that the component's CI testing accurate reflects what customers will
experience.

Most of these PRs are opened as an ART-driven proposal to migrate base image or builder(s) to a
different version, usually prior to GA. The intent is to effect changes in both configurations
simultaneously without breaking either CI or ART builds, so usually ART builds are configured to
consider CI as canonical and attempt to match CI config until the PR merges to align both. ART may
also configure changes in GA releases with CI remaining canonical for a brief grace period to enable
CI to succeed and the alignment PR to merge. In either case, ART configuration will be made
canonical at some point (typically at branch-cut before GA or release dev-cut after GA), so it is
important to align CI configuration as soon as possible.

PRs are also triggered when CI configuration changes without ART coordination, for instance to
change the number of builder images or to use a different golang version. These changes should be
coordinated with ART; whether ART configuration is canonical or not, preferably it would be updated
first to enable the changes to occur simultaneously in both CI and ART at the same time. This also
gives ART a chance to validate the intended changes first. For instance, ART compiles most
components with the Golang version being used by the control plane for a given OpenShift release.
Exceptions to this convention (i.e. you believe your component must be compiled with a Golang
version independent from the control plane) must be granted by the OpenShift staff engineers and
communicated to the ART team.

Roles & Responsibilities:

• Component owners are responsible for ensuring these alignment PRs merge with passing
  tests OR that necessary metadata changes are reported to the ART team
  in #forum-ocp-art on Slack. If necessary, the changes required by this pull request can be
  introduced with a separate PR opened by the component team. Once the repository is aligned,
  this PR will be closed automatically.
• In particular, it could be that a job like verify-deps is complaining. In that case, please open
  a new PR with the dependency issues addressed (and base images bumped). ART-9595 for reference.
• Patch-manager or those with sufficient privileges within this repository may add
  any required labels to ensure the PR merges once tests are passing. In cases where ART config is
  canonical, downstream builds are already being built with these changes, and merging this PR
  only improves the fidelity of our CI. In cases where ART config is not canonical, this provides
  a grace period for the component team to align their CI with ART's configuration before it becomes
  canonical in product builds.

ART has been configured to reconcile your CI build root image (see https://docs.ci.openshift.org/docs/architecture/ci-operator/#build-root-image).
In order for your upstream .ci-operator.yaml configuration to be honored, you must set the following in your openshift/release ci-operator configuration file:

build_root:
  from_repository: true

Change behavior of future PRs:

• In case you just want to follow the base images that ART suggests, you can configure additional labels to be
  set up automatically. This means that such a PR would merge without human intervention (and awareness!) in the future.
  To do so, open a PR to set the auto_label attribute in the image configuration. Example
• You can set a commit prefix, like UPSTREAM: <carry>: . An example.

If you have any questions about this pull request, please reach out in the #forum-ocp-art Slack channel.

[openshift-bot]

Created by ART pipeline job run https://art-jenkins.apps.prod-stable-spoke1-dc-iad2.itup.redhat.com/job/aos-cd-builds/job/build%252Fsync-ci-images/201

[coderabbitai]

Walkthrough

This PR updates the CI operator configuration to use an earlier Go release version, changing the build root image tag from Go 1.26 to Go 1.25 within the RHEL 9 OpenShift 5.0 release image in .ci-operator.yaml.

Changes

CI Configuration

Layer / File(s)	Summary
Build root image tag update .ci-operator.yaml	Build root image tag in build_root_image is downgraded from rhel-9-release-golang-1.26-openshift-5.0 to rhel-9-release-golang-1.25-openshift-5.0.

Estimated code review effort

🎯 1 (Trivial) | ⏱️ ~2 minutes

🚥 Pre-merge checks | ✅ 14 | ❌ 1

❌ Failed checks (1 warning)

Check name	Status	Explanation	Resolution
Title check	⚠️ Warning	The title mentions updating a csi-driver-manila-container image for ART consistency in 5.0, but the actual change is updating the Go version in the CI build root image tag from 1.26 to 1.25.	Update the title to reflect the actual change: updating the Go version in the build root image tag from 1.26 to 1.25 for OpenShift 5.0.

✅ Passed checks (14 passed)

Check name	Status	Explanation
Docstring Coverage	✅ Passed	No functions found in the changed files to evaluate docstring coverage. Skipping docstring coverage check.
Linked Issues check	✅ Passed	Check skipped because no linked issues were found for this pull request.
Out of Scope Changes check	✅ Passed	Check skipped because no linked issues were found for this pull request.
Stable And Deterministic Test Names	✅ Passed	PR only modifies .ci-operator.yaml (CI configuration), not test code. Custom check about Ginkgo test name stability is not applicable to configuration file changes.
Test Structure And Quality	✅ Passed	The custom check requires reviewing Ginkgo test code quality, but this PR only modifies .ci-operator.yaml CI configuration file without changing any test files, making the check inapplicable.
Microshift Test Compatibility	✅ Passed	This PR modifies only .ci-operator.yaml (CI configuration), not adding any new Ginkgo e2e tests. The custom check for MicroShift test compatibility is not applicable.
Single Node Openshift (Sno) Test Compatibility	✅ Passed	This PR updates CI configuration in .ci-operator.yaml (build root image tag) and is not adding new Ginkgo e2e tests, so the SNO test compatibility check does not apply.
Topology-Aware Scheduling Compatibility	✅ Passed	The PR modifies only .ci-operator.yaml, a CI build configuration file that does not contain deployment manifests, operator code, or controller logic. No scheduling constraints are introduced.
Ote Binary Stdout Contract	✅ Passed	PR only modifies .ci-operator.yaml (CI configuration), not process-level code; OTE Binary Stdout Contract check applies to code violations, not configuration changes.
Ipv6 And Disconnected Network Test Compatibility	✅ Passed	PR only modifies .ci-operator.yaml (Go 1.25 tag change); no new Ginkgo e2e tests were added, so IPv6/disconnected check doesn't apply.
No-Weak-Crypto	✅ Passed	PR only modifies .ci-operator.yaml (build configuration), not source code. No weak crypto patterns, custom implementations, or insecure comparisons are present in the configuration file change.
Container-Privileges	✅ Passed	PR only modifies .ci-operator.yaml (CI config), not container/K8s manifests. Custom check targets privileged container settings in manifests which are not present in this change.
No-Sensitive-Data-In-Logs	✅ Passed	No passwords, tokens, API keys, PII, or sensitive data exposed in logs. Logging uses generic error messages and workflow secrets are properly handled.
Description Check	✅ Passed	Check skipped - CodeRabbit’s high-level summary is enabled.

_{✏️ Tip: You can configure your own custom pre-merge checks in the settings.}

✨ Finishing Touches

🧪 Generate unit tests (beta)

• Create PR with unit tests

---

_{Comment @coderabbitai help to get the list of available commands and usage tips.}

[openshift-ci-robot]

@openshift-bot: This pull request references Jira Issue OCPBUGS-87330, which is valid. The bug has been moved to the POST state.

3 validation(s) were run on this bug

• bug is open, matching expected state (open)
• bug target version (5.0.0) matches configured target version for branch (5.0.0)
• bug is in the state New, which is one of the valid states (NEW, ASSIGNED, POST)

The bug has been updated to refer to the pull request using the external bug tracker.

Details

In response to this:

Updating csi-driver-manila-container image to be consistent with ART for 5.0
TLDR:
Product builds by ART can be configured for different base and builder images than corresponding CI
builds. This automated PR requests a change to CI configuration to align with ART's configuration;
please take steps to merge it quickly or contact ART to coordinate changes.

The configuration in the following ART component metadata is driving this alignment request:
csi-driver-manila.yml.

Detail:

This repository is out of sync with the downstream product builds for this component. The CI
configuration for at least one image differs from ART's expected product configuration. This should
be addressed to ensure that the component's CI testing accurate reflects what customers will
experience.

Most of these PRs are opened as an ART-driven proposal to migrate base image or builder(s) to a
different version, usually prior to GA. The intent is to effect changes in both configurations
simultaneously without breaking either CI or ART builds, so usually ART builds are configured to
consider CI as canonical and attempt to match CI config until the PR merges to align both. ART may
also configure changes in GA releases with CI remaining canonical for a brief grace period to enable
CI to succeed and the alignment PR to merge. In either case, ART configuration will be made
canonical at some point (typically at branch-cut before GA or release dev-cut after GA), so it is
important to align CI configuration as soon as possible.

PRs are also triggered when CI configuration changes without ART coordination, for instance to
change the number of builder images or to use a different golang version. These changes should be
coordinated with ART; whether ART configuration is canonical or not, preferably it would be updated
first to enable the changes to occur simultaneously in both CI and ART at the same time. This also
gives ART a chance to validate the intended changes first. For instance, ART compiles most
components with the Golang version being used by the control plane for a given OpenShift release.
Exceptions to this convention (i.e. you believe your component must be compiled with a Golang
version independent from the control plane) must be granted by the OpenShift staff engineers and
communicated to the ART team.

Roles & Responsibilities:

• Component owners are responsible for ensuring these alignment PRs merge with passing
  tests OR that necessary metadata changes are reported to the ART team
  in #forum-ocp-art on Slack. If necessary, the changes required by this pull request can be
  introduced with a separate PR opened by the component team. Once the repository is aligned,
  this PR will be closed automatically.
• In particular, it could be that a job like verify-deps is complaining. In that case, please open
  a new PR with the dependency issues addressed (and base images bumped). ART-9595 for reference.
• Patch-manager or those with sufficient privileges within this repository may add
  any required labels to ensure the PR merges once tests are passing. In cases where ART config is
  canonical, downstream builds are already being built with these changes, and merging this PR
  only improves the fidelity of our CI. In cases where ART config is not canonical, this provides
  a grace period for the component team to align their CI with ART's configuration before it becomes
  canonical in product builds.

ART has been configured to reconcile your CI build root image (see https://docs.ci.openshift.org/docs/architecture/ci-operator/#build-root-image).
In order for your upstream .ci-operator.yaml configuration to be honored, you must set the following in your openshift/release ci-operator configuration file:

build_root:
 from_repository: true

Change behavior of future PRs:

• In case you just want to follow the base images that ART suggests, you can configure additional labels to be
  set up automatically. This means that such a PR would merge without human intervention (and awareness!) in the future.
  To do so, open a PR to set the auto_label attribute in the image configuration. Example
• You can set a commit prefix, like UPSTREAM: <carry>: . An example.

If you have any questions about this pull request, please reach out in the #forum-ocp-art Slack channel.

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.

[openshift-ci]

[APPROVALNOTIFIER] This PR is NOT APPROVED

This pull-request has been approved by: openshift-bot
Once this PR has been reviewed and has the lgtm label, please assign jsafrane for approval. For more information see the Code Review Process.

The full list of commands accepted by this bot can be found here.

Details

Needs approval from an approver in each of these files:

• DOWNSTREAM_OWNERS

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

[openshift-ci-robot]

@openshift-bot: This pull request references Jira Issue OCPBUGS-87330, which is valid.

3 validation(s) were run on this bug

• bug is open, matching expected state (open)
• bug target version (5.0.0) matches configured target version for branch (5.0.0)
• bug is in the state POST, which is one of the valid states (NEW, ASSIGNED, POST)

Details

In response to this:

Updating csi-driver-manila-container image to be consistent with ART for 5.0
TLDR:
Product builds by ART can be configured for different base and builder images than corresponding CI
builds. This automated PR requests a change to CI configuration to align with ART's configuration;
please take steps to merge it quickly or contact ART to coordinate changes.

The configuration in the following ART component metadata is driving this alignment request:
csi-driver-manila.yml.

Detail:

This repository is out of sync with the downstream product builds for this component. The CI
configuration for at least one image differs from ART's expected product configuration. This should
be addressed to ensure that the component's CI testing accurate reflects what customers will
experience.

Most of these PRs are opened as an ART-driven proposal to migrate base image or builder(s) to a
different version, usually prior to GA. The intent is to effect changes in both configurations
simultaneously without breaking either CI or ART builds, so usually ART builds are configured to
consider CI as canonical and attempt to match CI config until the PR merges to align both. ART may
also configure changes in GA releases with CI remaining canonical for a brief grace period to enable
CI to succeed and the alignment PR to merge. In either case, ART configuration will be made
canonical at some point (typically at branch-cut before GA or release dev-cut after GA), so it is
important to align CI configuration as soon as possible.

PRs are also triggered when CI configuration changes without ART coordination, for instance to
change the number of builder images or to use a different golang version. These changes should be
coordinated with ART; whether ART configuration is canonical or not, preferably it would be updated
first to enable the changes to occur simultaneously in both CI and ART at the same time. This also
gives ART a chance to validate the intended changes first. For instance, ART compiles most
components with the Golang version being used by the control plane for a given OpenShift release.
Exceptions to this convention (i.e. you believe your component must be compiled with a Golang
version independent from the control plane) must be granted by the OpenShift staff engineers and
communicated to the ART team.

Roles & Responsibilities:

• Component owners are responsible for ensuring these alignment PRs merge with passing
  tests OR that necessary metadata changes are reported to the ART team
  in #forum-ocp-art on Slack. If necessary, the changes required by this pull request can be
  introduced with a separate PR opened by the component team. Once the repository is aligned,
  this PR will be closed automatically.
• In particular, it could be that a job like verify-deps is complaining. In that case, please open
  a new PR with the dependency issues addressed (and base images bumped). ART-9595 for reference.
• Patch-manager or those with sufficient privileges within this repository may add
  any required labels to ensure the PR merges once tests are passing. In cases where ART config is
  canonical, downstream builds are already being built with these changes, and merging this PR
  only improves the fidelity of our CI. In cases where ART config is not canonical, this provides
  a grace period for the component team to align their CI with ART's configuration before it becomes
  canonical in product builds.

ART has been configured to reconcile your CI build root image (see https://docs.ci.openshift.org/docs/architecture/ci-operator/#build-root-image).
In order for your upstream .ci-operator.yaml configuration to be honored, you must set the following in your openshift/release ci-operator configuration file:

build_root:
 from_repository: true

Change behavior of future PRs:

• In case you just want to follow the base images that ART suggests, you can configure additional labels to be
  set up automatically. This means that such a PR would merge without human intervention (and awareness!) in the future.
  To do so, open a PR to set the auto_label attribute in the image configuration. Example
• You can set a commit prefix, like UPSTREAM: <carry>: . An example.

If you have any questions about this pull request, please reach out in the #forum-ocp-art Slack channel.

Summary by CodeRabbit

• Chores
• Updated Go version in build configuration from 1.26 to 1.25.

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.

[coderabbitai]

Actionable comments posted: 1

🤖 Prompt for all review comments with AI agents

Verify each finding against current code. Fix only still-valid issues, skip the
rest with a brief reason, keep changes minimal, and validate.

Inline comments:
In @.ci-operator.yaml:
- Line 4: The build-root Go tag was incorrectly set to
rhel-9-release-golang-1.25-openshift-5.0; update the tag value in the CI config
to rhel-9-release-golang-1.26-openshift-5.0 so it matches ART’s configured
stream (change the tag string on the line containing "tag:
rhel-9-release-golang-1.25-openshift-5.0" to
"rhel-9-release-golang-1.26-openshift-5.0").

🪄 Autofix (Beta)

Fix all unresolved CodeRabbit comments on this PR:

• Push a commit to this branch (recommended)
• Create a new PR with the fixes

---

ℹ️ Review info

⚙️ Run configuration

Configuration used: Repository: openshift/coderabbit/.coderabbit.yaml

Review profile: CHILL

Plan: Enterprise

Run ID: 9a4cd9c1-92a0-4c67-8908-f586469f6663

📥 Commits

Reviewing files that changed from the base of the PR and between f8bb599 and 7863fed.

📒 Files selected for processing (1)

• .ci-operator.yaml

[coderabbitai]

⚠️ Potential issue | 🟠 Major

🧩 Analysis chain

🏁 Script executed:

#!/bin/bash
# Description: Verify the build root image tag against ART's ocp-build-data configuration.
# Expected: The tag should match what's defined in images/csi-driver-manila.yml at commit 7691ed4d.

# Check if ocp-build-data repo is accessible and fetch the specific commit
if gh repo view openshift-eng/ocp-build-data &>/dev/null; then
  echo "Fetching ART configuration from ocp-build-data..."
  gh api repos/openshift-eng/ocp-build-data/contents/images/csi-driver-manila.yml?ref=7691ed4d \
    --jq '.content' | base64 -d | grep -A5 -B5 "golang\|build_root\|builder"
else
  echo "Unable to access ocp-build-data repo. Please verify manually."
  echo "Check: https://github.com/openshift-eng/ocp-build-data/blob/7691ed4d/images/csi-driver-manila.yml"
fi

# Also check if there are any references to Go version requirements in the codebase
echo -e "\n--- Checking for Go version requirements in codebase ---"
rg -i "go\s+(1\.2[56]|>=?\s*1\.2[56])" --type=go --type=yaml --type=toml -C2

Repository: openshift/cloud-provider-openstack

Length of output: 5565

---

Fix build-root Go tag to match ART (Go 1.26, not 1.25)

./.ci-operator.yaml line 4 downgrades the build-root tag from rhel-9-release-golang-1.26-openshift-5.0 to rhel-9-release-golang-1.25-openshift-5.0, but openshift-eng/ocp-build-data commit 7691ed4d (images/csi-driver-manila.yml) shows from.builder.stream: rhel-9-golang-1.26. Align the tag with ART’s configured stream.

🤖 Prompt for AI Agents

Verify each finding against current code. Fix only still-valid issues, skip the
rest with a brief reason, keep changes minimal, and validate.

In @.ci-operator.yaml at line 4, The build-root Go tag was incorrectly set to
rhel-9-release-golang-1.25-openshift-5.0; update the tag value in the CI config
to rhel-9-release-golang-1.26-openshift-5.0 so it matches ART’s configured
stream (change the tag string on the line containing "tag:
rhel-9-release-golang-1.25-openshift-5.0" to
"rhel-9-release-golang-1.26-openshift-5.0").

[openshift-bot]

ART wants to connect issue OCPBUGS-87617 to this PR, but found it is currently hooked up to ['OCPBUGS-87330']. Please consult with #forum-ocp-art if it is not clear what there is to do.

[eshulman2]

/retest

[openshift-ci]

@openshift-bot: The following tests failed, say /retest to rerun all failed tests or /retest-required to rerun all mandatory failed tests:

Test name	Commit	Details	Required	Rerun command
ci/prow/unit	7863fed	link	true	/test unit
ci/prow/e2e-openstack	7863fed	link	true	/test e2e-openstack
ci/prow/security	7863fed	link	false	/test security
ci/prow/verify-deps	7863fed	link	true	/test verify-deps

Full PR test history. Your PR dashboard.

Details

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository. I understand the commands that are listed here.

[openshift-ci-robot]

@openshift-bot: This pull request references Jira Issue OCPBUGS-87330. The bug has been updated to no longer refer to the pull request using the external bug tracker. All external bug links have been closed. The bug has been moved to the NEW state.

Details

In response to this:

Updating csi-driver-manila-container image to be consistent with ART for 5.0
TLDR:
Product builds by ART can be configured for different base and builder images than corresponding CI
builds. This automated PR requests a change to CI configuration to align with ART's configuration;
please take steps to merge it quickly or contact ART to coordinate changes.

The configuration in the following ART component metadata is driving this alignment request:
csi-driver-manila.yml.

Detail:

This repository is out of sync with the downstream product builds for this component. The CI
configuration for at least one image differs from ART's expected product configuration. This should
be addressed to ensure that the component's CI testing accurate reflects what customers will
experience.

Most of these PRs are opened as an ART-driven proposal to migrate base image or builder(s) to a
different version, usually prior to GA. The intent is to effect changes in both configurations
simultaneously without breaking either CI or ART builds, so usually ART builds are configured to
consider CI as canonical and attempt to match CI config until the PR merges to align both. ART may
also configure changes in GA releases with CI remaining canonical for a brief grace period to enable
CI to succeed and the alignment PR to merge. In either case, ART configuration will be made
canonical at some point (typically at branch-cut before GA or release dev-cut after GA), so it is
important to align CI configuration as soon as possible.

PRs are also triggered when CI configuration changes without ART coordination, for instance to
change the number of builder images or to use a different golang version. These changes should be
coordinated with ART; whether ART configuration is canonical or not, preferably it would be updated
first to enable the changes to occur simultaneously in both CI and ART at the same time. This also
gives ART a chance to validate the intended changes first. For instance, ART compiles most
components with the Golang version being used by the control plane for a given OpenShift release.
Exceptions to this convention (i.e. you believe your component must be compiled with a Golang
version independent from the control plane) must be granted by the OpenShift staff engineers and
communicated to the ART team.

Roles & Responsibilities:

• Component owners are responsible for ensuring these alignment PRs merge with passing
  tests OR that necessary metadata changes are reported to the ART team
  in #forum-ocp-art on Slack. If necessary, the changes required by this pull request can be
  introduced with a separate PR opened by the component team. Once the repository is aligned,
  this PR will be closed automatically.
• In particular, it could be that a job like verify-deps is complaining. In that case, please open
  a new PR with the dependency issues addressed (and base images bumped). ART-9595 for reference.
• Patch-manager or those with sufficient privileges within this repository may add
  any required labels to ensure the PR merges once tests are passing. In cases where ART config is
  canonical, downstream builds are already being built with these changes, and merging this PR
  only improves the fidelity of our CI. In cases where ART config is not canonical, this provides
  a grace period for the component team to align their CI with ART's configuration before it becomes
  canonical in product builds.

ART has been configured to reconcile your CI build root image (see https://docs.ci.openshift.org/docs/architecture/ci-operator/#build-root-image).
In order for your upstream .ci-operator.yaml configuration to be honored, you must set the following in your openshift/release ci-operator configuration file:

build_root:
 from_repository: true

Change behavior of future PRs:

• In case you just want to follow the base images that ART suggests, you can configure additional labels to be
  set up automatically. This means that such a PR would merge without human intervention (and awareness!) in the future.
  To do so, open a PR to set the auto_label attribute in the image configuration. Example
• You can set a commit prefix, like UPSTREAM: <carry>: . An example.

If you have any questions about this pull request, please reach out in the #forum-ocp-art Slack channel.

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.