Skip to content

[enterprise-4.20] TELCODOCS-2852: Add short description attributes for DITA conversion #113737

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Merged
slovern merged 1 commit into from
Jun 19, 2026
+9 −3
Merged

[enterprise-4.20] TELCODOCS-2852: Add short description attributes for DITA conversion #113737

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
11 changes: 8 additions & 3 deletions modules/proc-switching-bf2-nic.adoc
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -6,6 +6,7 @@
[id="proc-switching-bf2-nic_{context}"]
= Switching Bluefield-2 from DPU mode to NIC mode

[role="_abstract"]
Use the following procedure to switch Bluefield-2 from data processing units (DPU) mode to network interface controller (NIC) mode.

[IMPORTANT]
Expand All @@ -26,6 +27,7 @@ Currently, only switching Bluefield-2 from DPU to NIC mode is supported. Switchi
----
$ oc label node <node_name> node-role.kubernetes.io/sriov=
----
+
--
where:

Expand Down Expand Up @@ -84,13 +86,16 @@ spec:
[Service]
SuccessExitStatus=0 120
RemainAfterExit=True
ExecStart=/bin/bash -c '/etc/default/switch_in_sriov_config_daemon.sh nic || shutdown -r now' <1>
ExecStart=/bin/bash -c '/etc/default/switch_in_sriov_config_daemon.sh nic || shutdown -r now'
Type=oneshot
[Install]
WantedBy=multi-user.target
----
<1> Optional: The PCI address of a specific card can optionally be specified, for example `ExecStart=/bin/bash -c '/etc/default/switch_in_sriov_config_daemon.sh nic 0000:5e:00.0 || echo done'`. By default, the first device is selected. If there is more than one device, you must specify which PCI address to be used. The PCI address must be the same on all nodes that are switching Bluefield-2 from DPU mode to NIC mode.
+
--
* `ExecStart` specifies the command to switch the Bluefield-2 into NIC mode. Optionally, you can specify the PCI address of a specific card, for example `ExecStart=/bin/bash -c '/etc/default/switch_in_sriov_config_daemon.sh nic 0000:5e:00.0 || echo done'`. By default, the first device is selected. If there is more than one device, you must specify which PCI address to use. The PCI address must be the same on all nodes that are switching Bluefield-2 from DPU mode to NIC mode.
--

. Wait for the compute nodes to restart. After restarting, the Bluefield-2 network device on the compute nodes is switched into NIC mode.

. Optional: You might need to restart the host hardware because most recent Bluefield-2 firmware releases require a hardware restart to switch into NIC mode.
. Optional: You might need to restart the host hardware because most recent Bluefield-2 firmware releases require a hardware restart to switch into NIC mode.
1 change: 1 addition & 0 deletions networking/hardware_networks/switching-bf2-nic-dpu.adoc
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -6,6 +6,7 @@ include::_attributes/common-attributes.adoc[]

toc::[]

[role="_abstract"]
You can switch the Bluefield-2 network device from data processing unit (DPU) mode to network interface controller (NIC) mode.

Before you perform any tasks in the following documentation, ensure that you xref:../../networking/networking_operators/sr-iov-operator/installing-sriov-operator.adoc#installing-sriov-operator[installed the SR-IOV Network Operator].
Expand Down