Magic Home BL602 remote

[Calistomodo]

Hello,
On a Magic Home with a BL602 chip, a remote control operating on 2.4G according to the documentation is no longer usable after the flash.
After extensive testing and research, I unfortunately can't find how to configure it to make it work again.
Is there a setting I haven't found, or is this feature not yet available?
Thank you for your assistance.

[openshwprojects]

Do you have any information how this works? Bluetooth, WiFi?

[Calistomodo]

Hello,
The documentation states 2.4 G Bluetooth.
Unfortunately, I don’t have any further information.
the module also works via Wi-Fi, and there are no issues on that side.
Kind regards.

[NonPIayerCharacter]

Are you sure that it uses Bluetooth?
Remotes like that usually work over IR, not Bluetooth.

[Calistomodo]

Hello again, thank you for taking the time to help me.
I don't have an IR receiver on it, it's an RF transmission.
Best regards

[NonPIayerCharacter]

RF 433?
If so, then perhaps it's supported.
We have RC-Switch support, but it's not enabled on BL602.

[Calistomodo]

According to the documentation, it wouldn't be 433 MHz, but 2.4 GHz

[NonPIayerCharacter]

Can you share device name. or pcb pictures?
There were only one device with bluetooth remote before, and it was a Tuya one.

[Calistomodo]

Here is the photo of the PCB. If the reference isn't very clear, it is zj-bwce-rgbw v1.1

[NonPIayerCharacter]

I see, there's no separate RF receiver.

There's no bluetooth support for BL602 at the moment, i'll need to get a remote myself.
Basic BLE scan support is not very hard, but if it requires pairing - then that's a problem.

[Calistomodo]

Can I help you by running a few tests?

[NonPIayerCharacter]

Do you have Home Assistant + bluetooth?
If any button is pressed, is there anything that could be this remote here: http://{ha addr}:{ha port}/config/bluetooth/advertisement-monitor

[Calistomodo]

The vendor's documentation does indeed specify 2.4 GHz Bluetooth, but I think this is a mistake and that the remote control uses the
2.4 GHz radio

BL602/BL604 is a Wi-Fi + BLE combo chipset for ultra-low-cost and low-power applications.
The wireless subsystem includes a 2.4 GHz radio, Wi-Fi 802.11b/g/n, and BLE 5.0 baseband/MAC designs.

[NonPIayerCharacter]

That's even worse. I've no idea how to receive raw data wirelessly