FreeRTOSConfig.h

/* --------------------------------------------------------------------------
 * Copyright (c) 2013-2018 Arm Limited. All rights reserved.
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the License); you may
 * not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *
 * --------------------------------------------------------------------------
 *
 * $Revision:   V10.1.1
 *
 * Project:     CMSIS-FreeRTOS
 * Title:       FreeRTOS configuration definitions
 *
 * --------------------------------------------------------------------------*/


#ifndef FREERTOS_CONFIG_H
#define FREERTOS_CONFIG_H

/*-----------------------------------------------------------
 * Application specific definitions.
 *
 * These definitions should be adjusted for your particular hardware and
 * application requirements.
 *
 * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
 * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
 *
 * See http://www.freertos.org/a00110.html.
 *----------------------------------------------------------*/

#include <stdint.h>

//#include "RTE_Components.h"
//#include CMSIS_device_header
#include "cmsis.h"
#include "hal_trace.h"

//-------- <<< Use Configuration Wizard in Context Menu >>> --------------------

//  <o>Minimal stack size [words] <0-65535>
//  <i> Stack for idle task and default task stack in words.
//  <i> Default: 128
#define configMINIMAL_STACK_SIZE                ((uint16_t)(512))

//  <o>Total heap size [bytes] <0-0xFFFFFFFF>
//  <i> Heap memory size in bytes.
//  <i> Default: 8192
#define configTOTAL_HEAP_SIZE                   ((size_t)(8192 * 4))

//  <o>Kernel tick frequency [Hz] <0-0xFFFFFFFF>
//  <i> Kernel tick rate in Hz.
//  <i> Default: 1000
#define configTICK_RATE_HZ                      ((TickType_t)1000)

//  <o>Timer task stack depth [words] <0-65535>
//  <i> Stack for timer task in words.
//  <i> Default: 80
#define configTIMER_TASK_STACK_DEPTH            512

//  <o>Timer task priority <0-56>
//  <i> Timer task priority.
//  <i> Default: 40 (High)
#define configTIMER_TASK_PRIORITY               40

//  <o>Timer queue length <0-1024>
//  <i> Timer command queue length.
//  <i> Default: 5
#define configTIMER_QUEUE_LENGTH                25

//  <o>Preemption interrupt priority
//  <i> Maximum priority of interrupts that are safe to call FreeRTOS API.
//  <i> Default: 16
//#define configMAX_SYSCALL_INTERRUPT_PRIORITY    16
#define configMAX_SYSCALL_INTERRUPT_PRIORITY     64

//  <q>Use time slicing
//  <i> Enable setting to use timeslicing.
//  <i> Default: 1
#define configUSE_TIME_SLICING                  1

//  <q>Idle should yield
//  <i> Control Yield behaviour of the idle task.
//  <i> Default: 1
#define configIDLE_SHOULD_YIELD                 1

#define configUSE_TICKLESS_IDLE                 1

//  <o>Check for stack overflow
//    <0=>Disable <1=>Method one <2=>Method two
//  <i> Enable or disable stack overflow checking.
//  <i> Callback function vApplicationStackOverflowHook implementation is required when stack checking is enabled.
//  <i> Default: 0
#define configCHECK_FOR_STACK_OVERFLOW          2

//  <q>Use idle hook
//  <i> Enable callback function call on each idle task iteration.
//  <i> Callback function vApplicationIdleHook implementation is required when idle hook is enabled.
//  <i> Default: 0
#define configUSE_IDLE_HOOK                     1

//  <q>Use tick hook
//  <i> Enable callback function call during each tick interrupt.
//  <i> Callback function vApplicationTickHook implementation is required when tick hook is enabled.
//  <i> Default: 0
#define configUSE_TICK_HOOK                     0

//  <q>Use deamon task startup hook
//  <i> Enable callback function call when timer service starts.
//  <i> Callback function vApplicationDaemonTaskStartupHook implementation is required when deamon task startup hook is enabled.
//  <i> Default: 0
#define configUSE_DAEMON_TASK_STARTUP_HOOK      0

//  <q>Use malloc failed hook
//  <i> Enable callback function call when out of dynamic memory.
//  <i> Callback function vApplicationMallocFailedHook implementation is required when malloc failed hook is enabled.
//  <i> Default: 0
#define configUSE_MALLOC_FAILED_HOOK            1

//  <o>Queue registry size
//  <i> Define maximum number of queue objects registered for debug purposes.
//  <i> The queue registry is used by kernel aware debuggers to locate queue and semaphore structures and display associated text names.
//  <i> Default: 0
#define configQUEUE_REGISTRY_SIZE               0

//#define configGENERATE_RUN_TIME_STATS           1
#define configUSE_STATS_FORMATTING_FUNCTIONS    1

//   Used for the minist time for enter deep sleep
//  <i> Default: 4
#define configEXPECTED_IDLE_TIME_BEFORE_SLEEP   5

// <h>Event Recorder configuration
//  <i> Initialize and setup Event Recorder level filtering.
//  <i> Settings have no effect when Event Recorder is not present.

//  <q>Initialize Event Recorder
//  <i> Initialize Event Recorder before FreeRTOS kernel start.
//  <i> Default: 1
#define configEVR_INITIALIZE                    1

//  <e>Setup recording level filter
//  <i> Enable configuration of FreeRTOS events recording level
//  <i> Default: 1
#define configEVR_SETUP_LEVEL                   1

//  <o>Tasks functions
//  <i> Define event recording level bitmask for events generated from Tasks functions.
//  <i> Default: 0x05
//    <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
#define configEVR_LEVEL_TASKS                   0x05

//  <o>Queue functions
//  <i> Define event recording level bitmask for events generated from Queue functions.
//  <i> Default: 0x05
//    <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
#define configEVR_LEVEL_QUEUE                   0x05

//  <o>Timer functions
//  <i> Define event recording level bitmask for events generated from Timer functions.
//  <i> Default: 0x05
//    <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
#define configEVR_LEVEL_TIMERS                  0x05

//  <o>Event Groups functions
//  <i> Define event recording level bitmask for events generated from Event Groups functions.
//  <i> Default: 0x05
//    <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
#define configEVR_LEVEL_EVENTGROUPS             0x05

//  <o>Heap functions
//  <i> Define event recording level bitmask for events generated from Heap functions.
//  <i> Default: 0x05
//    <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
#define configEVR_LEVEL_HEAP                    0x05

//  <o>Stream Buffer functions
//  <i> Define event recording level bitmask for events generated from Stream Buffer functions.
//  <i> Default: 0x05
//    <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
#define configEVR_LEVEL_STREAMBUFFER            0x05
//  </e>
// </h>
#define configASSERT( x )  do {ASSERT( x, "%s %s, %d\n", #x, __func__, __LINE__)} while(0)
//------------- <<< end of configuration section >>> ---------------------------

extern uint32_t SystemCoreClock;

/* Defines needed by FreeRTOS to implement CMSIS RTOS2 API. Do not change! */
#define configCPU_CLOCK_HZ                      (SystemCoreClock)
#define configSUPPORT_STATIC_ALLOCATION         1
#define configSUPPORT_DYNAMIC_ALLOCATION        1
#define configUSE_PREEMPTION                    1
#define configUSE_TIMERS                        1
#define configUSE_MUTEXES                       1
#define configUSE_RECURSIVE_MUTEXES             1
#define configUSE_COUNTING_SEMAPHORES           1
#define configUSE_TASK_NOTIFICATIONS            1
#define configUSE_TRACE_FACILITY                1
#define configUSE_16_BIT_TICKS                  0
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
#define configMAX_PRIORITIES                    56
#define configKERNEL_INTERRUPT_PRIORITY         255

/* Defines that include FreeRTOS functions which implement CMSIS RTOS2 API. Do not change! */
#define INCLUDE_xEventGroupSetBitsFromISR       1
#define INCLUDE_xSemaphoreGetMutexHolder        1
#define INCLUDE_vTaskDelay                      1
#define INCLUDE_vTaskDelayUntil                 1
#define INCLUDE_vTaskDelete                     1
#define INCLUDE_xTaskGetCurrentTaskHandle       1
#define INCLUDE_xTaskGetSchedulerState          1
#define INCLUDE_uxTaskGetStackHighWaterMark     1
#define INCLUDE_uxTaskPriorityGet               1
#define INCLUDE_vTaskPrioritySet                1
#define INCLUDE_eTaskGetState                   1
#define INCLUDE_vTaskSuspend                    1
#define INCLUDE_xTimerPendFunctionCall          1

/* Map the FreeRTOS port interrupt handlers to their CMSIS standard names. */
#define xPortPendSVHandler                      PendSV_Handler
#define vPortSVCHandler                         SVC_Handler

/* Include debug event definitions */
#include "freertos_evr.h"

#endif /* FREERTOS_CONFIG_H */