v1.0.0 - Stable Release

Epomaker Galaxy100 Lite Stable Release

Release date: 2026-03-20

This release packages the current best confirmed build for the Epomaker Galaxy100 Lite firmware mod project.

Included files:

• firmware/Epomaker Galaxy100 Lite CS8910-V108-20250610_StableFallback_AllFeatures_AckCleanup.bin
• via/Epomaker Galaxy100 Lite - Stable Per-Key, Backlight, Lock Toggle, Persistence, and Cycle In Out Dual.JSON
• SHA256SUMS.txt

Confirmed working features:

• Stock Backlight controls work in VIA.
• Caps Lock / Num Lock white override can be toggled in VIA.
• 4 per-key override slots work in VIA.
• Per-key overrides persist after unplug/replug.
• Stock backlight settings persist after unplug/replug.
• Custom effect cycle_in_out_dual is available and replaces band_val.
• ACK/UI cleanup is included in this build.

Important UI notes:

• Esc (special) is the correct target for the Esc LED.
• Knob is a placeholder alignment entry and does not currently map to a visible RGB LED target.
• If the same key is assigned in more than one per-key slot, the newer slot wins.
• VIA may not immediately refresh the older slot's displayed dropdown value after duplicate-key dedupe.

How to use:

1. Flash the included firmware .bin.
2. Load the included VIA .JSON.
3. Use the Lighting menu in VIA for:
   • stock backlight settings
   • Indicators > Lock White Override
   • Per-Key Override (Slot 1..4)

Known exclusions from this release:

• The experimental per-key color-selector / color-wheel firmware is not included.
• Per-slot enable toggles are not included.
• Dynamic dropdown filtering is not supported by stock VIA.

Project fallback references still kept outside this release folder:

• original firmware: firmware/Epomaker Galaxy100 Lite CS8910-V108-20250610_Original.bin
• earlier white-override-only fallback: firmware/Epomaker Galaxy100 Lite CS8910-V108-20250610_NoCapsNumWhite.bin