main.py

import os
import time

import board
import digitalio
import microcontroller
from lib.proveskit_rp2350_v5b.register import Register
from lib.pysquared.beacon import Beacon
from lib.pysquared.cdh import CommandDataHandler
from lib.pysquared.config.config import Config
from lib.pysquared.hardware.busio import _spi_init, initialize_i2c_bus
from lib.pysquared.hardware.digitalio import initialize_pin
from lib.pysquared.hardware.imu.manager.lsm6dsox import LSM6DSOXManager
from lib.pysquared.hardware.magnetometer.manager.lis2mdl import LIS2MDLManager
from lib.pysquared.hardware.radio.manager.rfm9x import RFM9xManager
from lib.pysquared.hardware.radio.manager.sx1280 import SX1280Manager
from lib.pysquared.hardware.radio.packetizer.packet_manager import PacketManager
from lib.pysquared.logger import Logger
from lib.pysquared.nvm.counter import Counter
from lib.pysquared.rtc.manager.microcontroller import MicrocontrollerManager
from lib.pysquared.sleep_helper import SleepHelper
from lib.pysquared.watchdog import Watchdog
from utils import listener_nominal_power_loop
from version import __version__

boot_time: float = time.time()

# Satellite configuration constants
CUBE_IDS = ["Listener1", "Listener2", "Listener3"]
MY_CUBESAT_ID = "Listener1"

rtc = MicrocontrollerManager()

(boot_count := Counter(index=Register.boot_count)).increment()
error_count: Counter = Counter(index=Register.error_count)

logger: Logger = Logger(
    error_counter=error_count,
    colorized=False,
)

logger.info(
    "Booting",
    hardware_version=os.uname().version,  # type: ignore[attr-defined]
    software_version=__version__,
)

loiter_time: int = 5
for i in range(loiter_time):
    logger.info(f"Code Starting in {loiter_time-i} seconds")
    time.sleep(1)

try:
    watchdog = Watchdog(logger, board.WDT_WDI)
    watchdog.pet()

    logger.debug("Initializing Config")
    config: Config = Config("config.json")

    mux_reset = initialize_pin(
        logger, board.MUX_RESET, digitalio.Direction.OUTPUT, False
    )

    # TODO(nateinaction): fix spi init
    spi0 = _spi_init(
        logger,
        board.SPI0_SCK,
        board.SPI0_MOSI,
        board.SPI0_MISO,
    )

    spi1 = _spi_init(
        logger,
        board.SPI1_SCK,
        board.SPI1_MOSI,
        board.SPI1_MISO,
    )

    sband_radio = SX1280Manager(
        logger,
        config.radio,
        spi1,
        initialize_pin(logger, board.SPI1_CS0, digitalio.Direction.OUTPUT, True),
        initialize_pin(logger, board.RF2_RST, digitalio.Direction.OUTPUT, True),
        initialize_pin(logger, board.RF2_IO0, digitalio.Direction.OUTPUT, True),
        2.4,
        initialize_pin(logger, board.RF2_TX_EN, digitalio.Direction.OUTPUT, False),
        initialize_pin(logger, board.RF2_RX_EN, digitalio.Direction.OUTPUT, False),
    )

    i2c1 = initialize_i2c_bus(
        logger,
        board.SCL1,
        board.SDA1,
        100000,
    )

    sleep_helper = SleepHelper(logger, config, watchdog)

    uhf_radio = RFM9xManager(
        logger,
        config.radio,
        spi0,
        initialize_pin(logger, board.SPI0_CS0, digitalio.Direction.OUTPUT, True),
        initialize_pin(logger, board.RF1_RST, digitalio.Direction.OUTPUT, True),
    )

    magnetometer = LIS2MDLManager(logger, i2c1)

    imu = LSM6DSOXManager(logger, i2c1, 0x6B)

    uhf_packet_manager = PacketManager(
        logger,
        uhf_radio,
        config.radio.license,
        Counter(Register.message_count),
        0.2,
    )

    cdh = CommandDataHandler(logger, config, uhf_packet_manager)

    beacon = Beacon(
        logger,
        config.cubesat_name,
        uhf_packet_manager,
        boot_time,
        imu,
        magnetometer,
        uhf_radio,
        sband_radio,
        error_count,
        boot_count,
    )

    try:
        logger.info("Entering main loop")
        while True:
            # TODO(nateinaction): Modify behavior based on power state
            listener_nominal_power_loop(logger, uhf_packet_manager, sleep_helper)
            # nominal_power_loop(logger, uhf_packet_manager, sleep_helper, cube_ids=["Listener1", "Listener2", "Listener3"])

    except Exception as e:
        logger.critical("Critical in Main Loop", e)
        time.sleep(10)
        microcontroller.on_next_reset(microcontroller.RunMode.NORMAL)
        microcontroller.reset()
    finally:
        logger.info("Going Neutral!")

except Exception as e:
    logger.critical("An exception occured within main.py", e)