FROMLIST: wifi: ath12k: fix peer_id usage in normal RX path

ath12k_dp_rx_deliver_msdu() currently uses hal_rx_desc_data::peer_id
parsed from mpdu_start descriptor to do peer lookup. However In an A-MSDU
aggregation scenario, hardware only populates mpdu_start descriptor for
the first sub-msdu, but not the following ones. In that case peer_id could
be invalid, leading to peer lookup failure:

ath12k_wifi7_pci 0000:06:00.0: rx skb 00000000c391c041 len 1532 peer (null) 0 ucast sn 0 eht320 rate_idx 12 vht_nss 2 freq 6105 band 3 flag 0x40d1a fcs-err 0 mic-err 0 amsdu-more 0

As a result pubsta is NULL and parts of ieee80211_rx_status structure are
left uninitialized, which may cause unexpected behavior.

Fix it by switching the normal RX path to use ath12k_skb_rxcb::peer_id
which is parsed from REO ring's rx_mpdu_desc and is always valid.

hal_rx_desc_data::peer_id is still used in
ath12k_wifi7_dp_rx_frag_h_mpdu(), which is safe since A-MSDU
aggregation does not occur for fragmented frames. Similarly,
ath12k_skb_rxcb::peer_id may be overwritten by hal_rx_desc_data::peer_id
in ath12k_wifi7_dp_rx_h_mpdu(), which only handles non-aggregated
multicast/broadcast traffic.

CRs-Fixed4473306
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Link: https://lore.kernel.org/all/20260427-ath12k-fix-peer-id-source-v1-1-b5f701fb8e88@oss.qualcomm.com
Fixes: 11157e0 ("wifi: ath12k: Use ath12k_dp_peer in per packet Tx & Rx paths")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>

Author: Baochen Qiang

drivers/net/wireless/ath/ath12k/dp_rx.c

@@ -1346,7 +1346,7 @@ void ath12k_dp_rx_deliver_msdu(struct ath12k_pdev_dp *dp_pdev, struct napi_struc
 	bool is_mcbc = rxcb->is_mcbc;
 	bool is_eapol = rxcb->is_eapol;
 
-	peer = ath12k_dp_peer_find_by_peerid(dp_pdev, rx_info->peer_id);
+	peer = ath12k_dp_peer_find_by_peerid(dp_pdev, rxcb->peer_id);
 
 	pubsta = peer ? peer->sta : NULL;