Skip to content

entities.md

Latest commit

 

History

History
178 lines (141 loc) · 10.9 KB

entities.md

File metadata and controls

178 lines (141 loc) · 10.9 KB

Home Assistant Entities

Sensors

Key Name Notes
adblue_range AdBlue Range
aux_estimated_time_left_to_reach_target_temperature Heater Time to reach target temperature
car_captured Last Updated See (#last-updated-sensor)
charge_type Charge Type AC, DC
charging_power Charging Power In kW
charging_rate Charging Rate In km/h are being charged
charging_state Charging State Ready, Charging, Conserving, ...
combustion_range Combustion Range For hybrids
electric_range Electric Range For hybrids
estimated_time_left_to_reach_target_temperature Heater Time to reach target temperature
fuel_level Fuel Level
gas_level Gas Level Fo CNG hybrids
gas_range Gas Range For CNG hybrids
inspection_in_km Next Inspection
inspection Next Inspection
milage Mileage
oil_service_in_days Oil Service
oil_service_in_km Oil Service
operation Last Operation See (#last-operation)
outside_temperature Outside Temperature
range Range
remaining_charging_time Remaining Charging Time
service_event Last Service Event See (#last-service-event)
software_version Software Version Of the vehicle
target_battery_percentage Target Battery Percentage

Last Updated sensor

Provides timestamp when the vehicle has updated own status information to Skoda servers last time.

This is different from Last Service Event.

Last Operation

The sensor provides the status of the last performed operation. Possible values are "In Progress", "Completed succesfully", "Completed with warning" or "Error". The sensor changes the value in response to operations requests like charging start/stop, heating requests, lock/unlock, etc.

The attributes of the sensor contain also additional information like operation name and timestamp. The previous event information is provided as "history" attribute.

Last Service Event

The sensor provides the timestamp of the last service event that has been reported by the vehicle. Following service events are monitored:

  • change-access
  • change-charge-mode
  • change-lights
  • change-remaining-time
  • change-soc
  • charging-completed
  • charging-status-changed
  • climatisation-completed
  • departure-ready
  • departure-status-changed

The attributes of the sensor contain additional information about the service event (name, timestamp) as well as previously received event in "history".

NOTE: not all vehicles report all service events.

Binary Sensors

Key Name Notes
charger_connected Charger Connected
charger_locked Charge Lock
locked Vehicle Locked
doors_locked Doors Locked
doors_open Doors Open
windows_open Windows
trunk_open Trunk
bonnet_open Bonnet
sunroof_open Sunroof
lights_on Parking Lights
door_open_front_left Door Front Left
door_open_front_right Door Front Right
door_open_rear_left Door Rear Left
door_open_rear_right Door Rear Right
window_open_front_left Window Front Left
window_open_front_right Window Front Right
window_open_rear_left Window Rear Left
window_open_rear_right Window Rear Right

Switches

Switches become temporarily disabled when toggled, until the API operation completes.

Key Name Notes
window_heating Window Heating
charging_switch Charging
battery_care_mode Battery Care
reduced_current Reduced Current
charging Charging
auto_unlock_plug Unlock Plug when Charged
ac_at_unlock AC when Unlocked
ac_without_external_power AC without External Power
ac_seat_heating_front_left Left Seat Heating with AC
ac_seat_heating_front_right Right Seat Heating with AC
ac_window_heating Window Heating with AC
departure_timer_1 Departure Timer 1 Timer configuration is stored in attributes
departure_timer_2 Departure Timer 2 Timer configuration is stored in attributes
departure_timer_3 Departure Timer 3 Timer configuration is stored in attributes
ac_timer_1 Air-conditioning Timer 1 Timer configuration is stored in attributes
ac_timer_2 Air-conditioning Timer 2 Timer configuration is stored in attributes
ac_timer_3 Air-conditioning Timer 3 Timer configuration is stored in attributes

Buttons

Buttons become temporarily disabled when pressed, until the API operation completes.

Key Name Notes
honk_flash Honk and Flash
flash Flash
wakeup Wake Up Car ⚠️ Disabled by default

Wake Up Car

This button will result in a wake-up request being sent directly to the car. In order to protect the 12V battery most models have a strict limit on the number of times this can occur before requiring the car to be started. USE WITH CARE!

Climate

Climates use assumed state when modified.

Key Name Notes
climate Air Conditioning
auxiliary_heater Auxiliary Heater

Numbers

Numbers become temporarily disabled when modified, until the API operation completes.

Key Name Notes
charge_limit Charge Limit In % [50-100] in steps of 10
auxiliary_heater_duration Heater Duration In minutes [5-60] in steps of 5

Device Tracker

Key Name Notes
<VIN>_device_tracker Charge Limit In % [50-100] in steps of 10

Location of vehicles are exposed as device trackers. While the vehicle is moving the Skoda API does not return GPS coordinates and the device tracker will report the location vehicle_in_motion.

Main Render of Vehicle

The sensor contains the vehicle image as provided by Skoda. This can be used in Home Assistant in different cards, for example:

type: picture
image_entity: image.skoda_enyaq_main_render_of_vehicle

Besides, there is a set of attributes of the sensor that contains other images provided by the Skoda servers. Example of a templated sensor for an image:

- image:
    - name: "Skoda exterior image front"
      url: >
        {{ states.image.skoda_enyaq_main_render_of_vehicle.attributes.composite_renders.charging_light[0].exterior_front }}

Car Info

Sometimes you might need to access a VIN quickly and it might be convenient to use the Search to obtain this data quickly.

To achieve this, you can create a template sensor that prints this data using any entity identifier assigned to your car.

{{ device_attr(device_id('sensor.skoda_enyaq_mileage'), 'serial_number') }}