en/accessories/storage/penta-sata-hat/penta-for-rpi5

[giscus[bot]]

en/accessories/storage/penta-sata-hat/penta-for-rpi5

The Raspberry Pi 5 has a PCIe port that works well with the Radxa Penta SATA HAT.

https://docs.radxa.com/en/accessories/storage/penta-sata-hat/penta-for-rpi5

[Benockel]

Hey at sudo lspci -vvv -s 0000:01:00.1 | grep LnkSta my Pi do not give any feedback.
Can someone tell me what is the problem?!

My Pi 5 writes at lspci this:
0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 30)
0001:01:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller
0002:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 30)
0002:01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge

[MichaelKutscherBS]

Hi. it works, that's fine. However, I wonder if its possible to boot the raspi from one of the ssds or to have the OS on it und just a small bootloader on the sd-card?
I've tried with a complete OS on the first ssd, set the raspis boot-priority, but it did not work.
As sd-cards don't last long, it would be great to reduce it's use.
Is it possible and how can it be done?