net: ti: icssg-prueth: Fix HSR and switch offload Enablement during firwmare reload.

[ Upstream commit 01792bc3e5bdafa171dd83c7073f00e7de93a653 ]

To enable HSR / Switch offload, certain configurations are needed.
Currently they are done inside icssg_change_mode(). This function only
gets called if we move from one mode to another without bringing the
links up / down.

Once in HSR / Switch mode, if we bring the links down and bring it back
up again. The callback sequence is,

- emac_ndo_stop()
	Firmwares are stopped
- emac_ndo_open()
	Firmwares are loaded

In this path icssg_change_mode() doesn't get called and as a result the
configurations needed for HSR / Switch is not done.

To fix this, put all these configurations in a separate function
icssg_enable_fw_offload() and call this from both icssg_change_mode()
and emac_ndo_open()

Fixes: 5637508 ("net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20250814105106.1491871-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Author: danish-ti

drivers/net/ethernet/ti/icssg/icssg_prueth.c

@@ -240,6 +240,44 @@ static void prueth_emac_stop(struct prueth *prueth)
 	}
 }
 
+static void icssg_enable_fw_offload(struct prueth *prueth)
+{
+	struct prueth_emac *emac;
+	int mac;
+
+	for (mac = PRUETH_MAC0; mac < PRUETH_NUM_MACS; mac++) {
+		emac = prueth->emac[mac];
+		if (prueth->is_hsr_offload_mode) {
+			if (emac->ndev->features & NETIF_F_HW_HSR_TAG_RM)
+				icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE);
+			else
+				icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_DISABLE);
+		}
+
+		if (prueth->is_switch_mode || prueth->is_hsr_offload_mode) {
+			if (netif_running(emac->ndev)) {
+				icssg_fdb_add_del(emac, eth_stp_addr, prueth->default_vlan,
+						  ICSSG_FDB_ENTRY_P0_MEMBERSHIP |
+						  ICSSG_FDB_ENTRY_P1_MEMBERSHIP |
+						  ICSSG_FDB_ENTRY_P2_MEMBERSHIP |
+						  ICSSG_FDB_ENTRY_BLOCK,
+						  true);
+				icssg_vtbl_modify(emac, emac->port_vlan | DEFAULT_VID,
+						  BIT(emac->port_id) | DEFAULT_PORT_MASK,
+						  BIT(emac->port_id) | DEFAULT_UNTAG_MASK,
+						  true);
+				if (prueth->is_hsr_offload_mode)
+					icssg_vtbl_modify(emac, DEFAULT_VID,
+							  DEFAULT_PORT_MASK,
+							  DEFAULT_UNTAG_MASK, true);
+				icssg_set_pvid(prueth, emac->port_vlan, emac->port_id);
+				if (prueth->is_switch_mode)
+					icssg_set_port_state(emac, ICSSG_EMAC_PORT_VLAN_AWARE_ENABLE);
+			}
+		}
+	}
+}
+
 static int prueth_emac_common_start(struct prueth *prueth)
 {
 	struct prueth_emac *emac;
@@ -690,6 +728,7 @@ static int emac_ndo_open(struct net_device *ndev)
 		ret = prueth_emac_common_start(prueth);
 		if (ret)
 			goto free_rx_irq;
+		icssg_enable_fw_offload(prueth);
 	}
 
 	flow_cfg = emac->dram.va + ICSSG_CONFIG_OFFSET + PSI_L_REGULAR_FLOW_ID_BASE_OFFSET;
@@ -1146,44 +1185,15 @@ static int prueth_emac_restart(struct prueth *prueth)
 
 static void icssg_change_mode(struct prueth *prueth)
 {
-	struct prueth_emac *emac;
-	int mac, ret;
+	int ret;
 
 	ret = prueth_emac_restart(prueth);
 	if (ret) {
 		dev_err(prueth->dev, "Failed to restart the firmwares, aborting the process");
 		return;
 	}
 
-	for (mac = PRUETH_MAC0; mac < PRUETH_NUM_MACS; mac++) {
-		emac = prueth->emac[mac];
-		if (prueth->is_hsr_offload_mode) {
-			if (emac->ndev->features & NETIF_F_HW_HSR_TAG_RM)
-				icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE);
-			else
-				icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_DISABLE);
-		}
-
-		if (netif_running(emac->ndev)) {
-			icssg_fdb_add_del(emac, eth_stp_addr, prueth->default_vlan,
-					  ICSSG_FDB_ENTRY_P0_MEMBERSHIP |
-					  ICSSG_FDB_ENTRY_P1_MEMBERSHIP |
-					  ICSSG_FDB_ENTRY_P2_MEMBERSHIP |
-					  ICSSG_FDB_ENTRY_BLOCK,
-					  true);
-			icssg_vtbl_modify(emac, emac->port_vlan | DEFAULT_VID,
-					  BIT(emac->port_id) | DEFAULT_PORT_MASK,
-					  BIT(emac->port_id) | DEFAULT_UNTAG_MASK,
-					  true);
-			if (prueth->is_hsr_offload_mode)
-				icssg_vtbl_modify(emac, DEFAULT_VID,
-						  DEFAULT_PORT_MASK,
-						  DEFAULT_UNTAG_MASK, true);
-			icssg_set_pvid(prueth, emac->port_vlan, emac->port_id);
-			if (prueth->is_switch_mode)
-				icssg_set_port_state(emac, ICSSG_EMAC_PORT_VLAN_AWARE_ENABLE);
-		}
-	}
+	icssg_enable_fw_offload(prueth);
 }
 
 static int prueth_netdevice_port_link(struct net_device *ndev,