overlays: fix lines formatting of uart[0-4]-pi5

Author: giampiero7

arch/arm/boot/dts/overlays/uart0-pi5-overlay.dts

@@ -15,7 +15,8 @@
 
 	__overrides__ {
 		ctsrts = <&frag0>,"pinctrl-0:4=",<&uart0_ctsrts_pins>;
-		rs485 = <&frag0>,"pinctrl-0:4=",<&uart0_ctsrts_pins>, <&frag0>,"linux,rs485-enabled-at-boot-time?";
+		rs485 = <&frag0>,"pinctrl-0:4=",<&uart0_ctsrts_pins>,
+				<&frag0>,"linux,rs485-enabled-at-boot-time?";
 		rs485_full_duplex = <&frag0>,"rs485-rx-during-tx?";
 		rs485_invert_rts = <&frag0>,"rs485-rts-active-low?";
 		rs485_rts_on_delay = <&frag0>,"rs485-rts-delay:0";

arch/arm/boot/dts/overlays/uart1-pi5-overlay.dts

@@ -15,7 +15,8 @@
 
 	__overrides__ {
 		ctsrts = <&frag0>,"pinctrl-0:4=",<&uart1_ctsrts_pins>;
-		rs485 = <&frag0>,"pinctrl-0:4=",<&uart1_ctsrts_pins>, <&frag0>,"linux,rs485-enabled-at-boot-time?";
+		rs485 = <&frag0>,"pinctrl-0:4=",<&uart1_ctsrts_pins>,
+				<&frag0>,"linux,rs485-enabled-at-boot-time?";
 		rs485_full_duplex = <&frag0>,"rs485-rx-during-tx?";
 		rs485_invert_rts = <&frag0>,"rs485-rts-active-low?";
 		rs485_rts_on_delay = <&frag0>,"rs485-rts-delay:0";

arch/arm/boot/dts/overlays/uart2-pi5-overlay.dts

@@ -15,7 +15,8 @@
 
 	__overrides__ {
 		ctsrts = <&frag0>,"pinctrl-0:4=",<&uart2_ctsrts_pins>;
-		rs485 = <&frag0>,"pinctrl-0:4=",<&uart2_ctsrts_pins>, <&frag0>,"linux,rs485-enabled-at-boot-time?";
+		rs485 = <&frag0>,"pinctrl-0:4=",<&uart2_ctsrts_pins>,
+				<&frag0>,"linux,rs485-enabled-at-boot-time?";
 		rs485_full_duplex = <&frag0>,"rs485-rx-during-tx?";
 		rs485_invert_rts = <&frag0>,"rs485-rts-active-low?";
 		rs485_rts_on_delay = <&frag0>,"rs485-rts-delay:0";

arch/arm/boot/dts/overlays/uart3-pi5-overlay.dts

@@ -15,7 +15,8 @@
 
 	__overrides__ {
 		ctsrts = <&frag0>,"pinctrl-0:4=",<&uart3_ctsrts_pins>;
-		rs485 = <&frag0>,"pinctrl-0:4=",<&uart3_ctsrts_pins>, <&frag0>,"linux,rs485-enabled-at-boot-time?";
+		rs485 = <&frag0>,"pinctrl-0:4=",<&uart3_ctsrts_pins>,
+				<&frag0>,"linux,rs485-enabled-at-boot-time?";
 		rs485_full_duplex = <&frag0>,"rs485-rx-during-tx?";
 		rs485_invert_rts = <&frag0>,"rs485-rts-active-low?";
 		rs485_rts_on_delay = <&frag0>,"rs485-rts-delay:0";

arch/arm/boot/dts/overlays/uart4-pi5-overlay.dts

@@ -15,7 +15,8 @@
 
 	__overrides__ {
 		ctsrts = <&frag0>,"pinctrl-0:4=",<&uart4_ctsrts_pins>;
-		rs485 = <&frag0>,"pinctrl-0:4=",<&uart4_ctsrts_pins>, <&frag0>,"linux,rs485-enabled-at-boot-time?";
+		rs485 = <&frag0>,"pinctrl-0:4=",<&uart4_ctsrts_pins>,
+				<&frag0>,"linux,rs485-enabled-at-boot-time?";
 		rs485_full_duplex = <&frag0>,"rs485-rx-during-tx?";
 		rs485_invert_rts = <&frag0>,"rs485-rts-active-low?";
 		rs485_rts_on_delay = <&frag0>,"rs485-rts-delay:0";