dtoverlays: Add overlay for the Sony IMX335 4-Lane camera

Provide support for the IMX335 sensor, which has upstream linux kernel
drivers.

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>

Author: kbingham

arch/arm/boot/dts/overlays/Makefile

@@ -137,6 +137,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	imx290.dtbo \
 	imx296.dtbo \
 	imx327.dtbo \
+	imx335.dtbo \
 	imx378.dtbo \
 	imx415.dtbo \
 	imx462.dtbo \

arch/arm/boot/dts/overlays/imx335-overlay.dts

@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Definitions for IMX335 camera module on VC I2C bus
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/{
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&i2c0if>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	clk_frag: fragment@1 {
+		target = <&cam1_clk>;
+		__overlay__ {
+			status = "okay";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	fragment@2 {
+		target = <&i2c0mux>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	reg_frag: fragment@3 {
+		target = <&cam1_reg>;
+		cam_reg: __overlay__ {
+			startup-delay-us = <200000>;
+			off-on-delay-us = <30000>;
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+	};
+
+	i2c_frag: fragment@100 {
+		target = <&i2c_csi_dsi>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			#include "imx335.dtsi"
+		};
+	};
+
+	csi_frag: fragment@101 {
+		target = <&csi1>;
+		csi: __overlay__ {
+			status = "okay";
+			brcm,media-controller;
+
+			port {
+				csi_ep: endpoint {
+					remote-endpoint = <&cam_endpoint>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					clock-noncontinuous;
+				};
+			};
+		};
+	};
+
+	__overrides__ {
+		rotation = <&cam_node>,"rotation:0";
+		orientation = <&cam_node>,"orientation:0";
+		media-controller = <&csi>,"brcm,media-controller?";
+		cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
+		       <&csi_frag>, "target:0=",<&csi0>,
+		       <&clk_frag>, "target:0=",<&cam0_clk>,
+		       <&reg_frag>, "target:0=",<&cam0_reg>,
+		       <&cam_node>, "clocks:0=",<&cam0_clk>,
+		       <&cam_node>, "avdd1-supply:0=",<&cam0_reg>;
+		link-frequency = <&cam_endpoint>,"link-frequencies#0";
+	};
+};
+
+&cam_node {
+	status = "okay";
+};
+
+&cam_endpoint {
+	remote-endpoint = <&csi_ep>;
+};

arch/arm/boot/dts/overlays/imx335.dtsi

@@ -0,0 +1,26 @@
+// Fragment that configures a Sony IMX335
+
+cam_node: imx335@1a {
+	compatible = "sony,imx335";
+	reg = <0x1a>;
+	status = "disabled";
+
+	clocks = <&cam1_clk>;
+	clock-names = "xclk";
+
+	avdd-supply = <&cam1_reg>;		/* Analog 2.9v */
+	iovdd-supply = <&cam_dummy_reg>;	/* Digital I/O 1.8v */
+	dvdd-supply = <&cam_dummy_reg>;		/* Digital Core 1.2v */
+
+	rotation = <180>;
+	orientation = <2>;
+
+	port {
+		cam_endpoint: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2 3 4>;
+			clock-noncontinuous;
+			link-frequencies = /bits/ 64 <594000000>;
+		};
+	};
+};