diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README
index 820af14f58cfd4..564bc366f99c96 100644
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -3570,6 +3570,9 @@ Params: rotation                Mounting rotation of the camera sensor (0 or
                                 Compute Module (CSI0, i2c_vc, and cam0_reg).
         arducam                 Slow down the regulator for slow Arducam
                                 modules.
+        clk-continuous          Switch to continuous mode on the CSI clock lane,
+                                which increases the maximum frame rate slightly.
+                                Appears not to work on Pi3.
 
 
 Name:   papirus
diff --git a/arch/arm/boot/dts/overlays/ov9281-overlay.dts b/arch/arm/boot/dts/overlays/ov9281-overlay.dts
index b574aacd063cd1..28b8cb538aa337 100644
--- a/arch/arm/boot/dts/overlays/ov9281-overlay.dts
+++ b/arch/arm/boot/dts/overlays/ov9281-overlay.dts
@@ -64,6 +64,20 @@
 		};
 	};
 
+	fragment@6 {
+		target = <&csi_ep>;
+		__overlay__ {
+			clock-noncontinuous;
+		};
+	};
+
+	fragment@7 {
+		target = <&cam_endpoint>;
+		__overlay__ {
+			clock-noncontinuous;
+		};
+	};
+
 	__overrides__ {
 		rotation = <&cam_node>,"rotation:0";
 		orientation = <&cam_node>,"orientation:0";
@@ -75,7 +89,7 @@
 		       <&cam_node>, "avdd-supply:0=",<&cam0_reg>,
 		       <&reg_frag>, "target:0=",<&cam0_reg>;
 		arducam = <0>, "+5";
-
+		clk-continuous = <0>, "-6-7";
 	};
 };