dt: Add eth_max_speed override for CM4, Pi4, and Pi400#7031
Merged
pelwell merged 3 commits intoraspberrypi:rpi-6.12.yfrom Sep 2, 2025
Merged
dt: Add eth_max_speed override for CM4, Pi4, and Pi400#7031pelwell merged 3 commits intoraspberrypi:rpi-6.12.yfrom
pelwell merged 3 commits intoraspberrypi:rpi-6.12.yfrom
Conversation
Contributor
Author
5 minutes seems to be failing on a regular basis, so increase it. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
max-speed is a generic property for ethernet PHYs, so should be supported by the PHY on CM4/Pi4/Pi400. Add the override and update the documentation accordingly. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
6by9
force-pushed
the
rpi-6.12.y-dtoverlays2
branch
from
9543359 to
65f282a
Compare
Contributor
Author
|
Added the parameter for Pi5/Pi500/CM5 as it works there too. |
max-speed is a generic property for ethernet PHYs, so is supported by the PHY on Pi5, Pi500, and CM5. Add the override and update the documentation accordingly. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
pelwell
force-pushed
the
rpi-6.12.y-dtoverlays2
branch
from
65f282a to
00ca63c
Compare
Contributor
Author
|
Thanks for the overlay README fixup - I got the failure email just as I'd shut down last night, so it was going to be the first thing I fixed this morning. |
popcornmix
added a commit
to raspberrypi/firmware
that referenced
this pull request
Sep 5, 2025
kernel: configs: Add EROFS_FS_ZIP_ZSTD See: raspberrypi/linux#7028 kernel: dt: Add eth_max_speed override for CM4, Pi4, and Pi400 See: raspberrypi/linux#7031 kernel: mfd: rp1: Fix device links when modules disabled See: raspberrypi/linux#7027 kernel: Add adxl355 to i2c-sensor See: raspberrypi/linux#6823 kernel: dtoverlays: Switch ssd1306 to use the DRM driver See: raspberrypi/linux#7034 kernel: Added device tree overlays for the rpi-power HAT See: raspberrypi/linux#7036 kernel: fixup! misc: rp1-pio: Request a DMA burst size of 8 See: raspberrypi/linux#7037
popcornmix
added a commit
to raspberrypi/rpi-firmware
that referenced
this pull request
Sep 5, 2025
kernel: configs: Add EROFS_FS_ZIP_ZSTD See: raspberrypi/linux#7028 kernel: dt: Add eth_max_speed override for CM4, Pi4, and Pi400 See: raspberrypi/linux#7031 kernel: mfd: rp1: Fix device links when modules disabled See: raspberrypi/linux#7027 kernel: Add adxl355 to i2c-sensor See: raspberrypi/linux#6823 kernel: dtoverlays: Switch ssd1306 to use the DRM driver See: raspberrypi/linux#7034 kernel: Added device tree overlays for the rpi-power HAT See: raspberrypi/linux#7036 kernel: fixup! misc: rp1-pio: Request a DMA burst size of 8 See: raspberrypi/linux#7037
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
max-speed is a generic property for ethernet PHYs, so should be supported by the PHY on CM4/Pi4/Pi400.
Add the override and update the documentation accordingly.