Beyond-SOTA engine/signal/train improvements: mesh partition guard, FFT CIR solver, canonical frame decoder, falsifiable occupancy benchmark, governed streaming, adapter provenance

CHANGELOG.md

@@ -7,7 +7,26 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## [Unreleased]
 
+### Changed
+- **Mesh partition risk now demotes the privacy class and is witnessed (ADR-032).** The dynamic min-cut guard's `at_risk` signal was advisory-only (it fed the recalibration advisor). It now also contributes to the ADR-141 privacy demotion alongside fusion- and array-level contradictions: a mesh close to partitioning makes the fused belief less trustworthy, so the cycle emits at a more restricted class (monotonic — information only removed). Because `effective_class` feeds the BLAKE3 witness, a fragmenting array now shifts the witness — partition risk is auditable, not just logged. The mesh computation moved ahead of the demotion step in `process_cycle`; new `mesh_guard_mut()` exposes risk-threshold tuning. Test proves a forced-risk 3-node cycle demotes PrivateHome Anonymous→Restricted and shifts the witness vs a clean *same-topology* baseline (the only delta between the two cycles is the forced risk).
+
+### Added
+- **Dynamic min-cut mesh partition guard in the streaming engine (`mesh_guard`).** Maintains a `ruvector-mincut` exact min-cut over the live mesh coupling graph (nodes = sensing nodes, coupling = product of fusion attention weights), surfacing per cycle: the global **cut value** (how close the array is to splitting — a structural measure per-node heuristics miss), the **weak side** (which specific nodes would partition: failure/jamming triage feeding ADR-032 posture), and an **at-risk flag** that counts as a structural event for the drift→recalibration advisor. Surfaced as `TrustedOutput::mesh`. **Measured cost policy** (criterion, 12-node mesh): weights are quantized (1/64; a *nonzero* coupling below one quantum saturates to quantum 1 so quantization never erases a live coupling — without the floor, balanced meshes of ≥ 65 nodes had every ~1/n coupling erased and sat permanently "at risk") and updates change-gated, so the steady-state cycle does zero graph work (~7.3 µs, ~23× cheaper than building); on any real change a full exact rebuild (~171 µs) is used because one `DynamicMinCut` delete+insert measured ~240 µs — the incremental machinery's overhead targets much larger graphs, so rebuild-on-change is the measured optimum at mesh scale (one-edge case −28% after the policy switch). Degenerate cases fail toward risk: a node with zero coupling is reported as already partitioned (cut 0). 9 mesh-guard tests + an engine-level wiring test; full `process_cycle` with the guard: ~33 µs for 4 nodes (50 ms budget).
+- **Opt-in FFT operator for the CIR ISTA solver (8–14× measured).** Φ is a sub-DFT, so each ISTA mat-vec can run as one length-G FFT (O(G log G)) instead of a dense O(K·G) product. New `CirConfig::fft_operator` (default **false** — the dense path stays the bit-exact witness default; the FFT evaluates the same sums in a different order, so enabling it shifts float results and requires regenerating any pinned witness). `FftOperator` (rustfft, planned once at construction, scratch reused across the ISTA loop) dispatches inside `ista_solve`; warm-start/Lipschitz stay dense at construction. Measured (criterion, same run): ht20 2.22 ms → 265 µs (**8.4×**), ht40 10.26 ms → 717 µs (**14.3×**); the real HE40 grid (K=484, G=1452) scales further. 3 new tests: FFT↔dense matvec equivalence to float tolerance (ht20 + he40 grids), end-to-end dominant-tap agreement on a single-path frame, and all default configs keep FFT off. New `cir_estimate_fft` bench group.
+- **Per-room adapter provenance + drift→recalibration advisor in the streaming engine.** Closes the trust-chain gap where an ~11 KB per-room LoRA adapter (ADR-150 §3.4) could silently change inference without the witness noticing. `StreamingEngine::set_room_adapter(AdapterInfo)` pins the adapter's content-derived id into provenance `model_version` (`rfenc-v1+adapter:<id>`) — and therefore into the BLAKE3 witness — so swapping or clearing adapter weights always shifts the witness (engine test proves base → adapter → other-adapter → cleared all witness differently, and cleared == base). New `RecalibrationAdvisor` recommends re-running the ADR-135 baseline / refitting the adapter on sustained low fusion coherence (streak threshold, default 60 cycles ≈ 3 s at 20 Hz) or an ADR-142 change-point; surfaced as `TrustedOutput::recalibration_recommended` and recorded on the sensing-server's `EngineBridge` alongside the witness. Bridge plumbing: `EngineBridge::{set_room_adapter, clear_room_adapter}` + live-path test that the adapter id flows into the live witness. *Scope note: this is the deployable provenance/trigger half of the "retrained model" roadmap item — fitting the adapter itself runs in the existing external calibration service (`aether-arena/calibration/`), and a trained RF-encoder checkpoint still does not exist in-tree.*
+- **RuView beyond-SOTA research series** (`docs/research/ruview-beyond-sota/`, 6 docs) — research-swarm output defining the beyond-SOTA bar and the path to it: system capability audit (role→crate maturity matrix, gap analysis, risk register), web-verified 2026 SOTA landscape per capability axis (incl. ratified IEEE 802.11bf-2025), 8-pillar target architecture on the ADR-136 contract spine (no rewrite), 6-layer benchmark/validation methodology (all 15 criterion bench targets inventoried; ADR-149 statistical protocol), and a determinism-safe optimization roadmap. Includes session validation evidence: 2,797 workspace tests / 0 failed, Python proof PASS (bit-exact), paired pre/post criterion runs.
+
+### Performance
+- **CIR estimator warm-start precompute** — the diagonal Tikhonov preconditioner `diag(Φ^H Φ)+λI` and its CSR matrix were rebuilt every frame although they depend only on Φ and λ (fixed at `CirEstimator::new`); now precomputed at construction (`ruvsense/cir.rs`). Bit-identical floats (summation order unchanged, witness chain unaffected). Measured: `cir_estimate/he40` −3.9% (p<0.01), multiband groups −1.2/−1.4%; smaller configs within container noise.
+- **RF tomography solver hoisting** — ISTA gradient buffer no longer allocated inside the 100-iteration loop, and the Frobenius Lipschitz bound moved from per-`reconstruct` to construction (`ruvsense/tomography.rs`). Bit-identical results.
+
+### Added
+- **Falsifiable occupancy benchmark (`wifi-densepose-train::occupancy_bench`).** Makes the presence/person-count "beyond SOTA" claim falsifiable in code instead of aspirational (the unfalsifiability gap from the beyond-SOTA system review). Grades predictions vs ground truth and gates a SOTA claim behind one `claim_allowed` invariant requiring all of: `DataProvenance::Measured` (synthetic/mock is scorable but **never claimable** — anti-mock-contamination per the CLAUDE.md Kconfig-bug lesson), a leak-free `EvalSplit` (refuses any split where a subject *or* environment id appears in both train and test — subject leakage / per-environment overfitting), `n_test ≥ min`, a **non-degenerate test set** (both truth classes represented: present-rate ≥ `min_positive_rate` and ≥ 1 absent sample — an all-absent set plus an always-absent predictor cannot release a claim; vacuous F1 scores 0.0, never 1.0), presence-F1 **bootstrap-CI lower bound** (deterministic seeded splitmix64) clearing the threshold, and count MAE within threshold. The claim string is unreadable except through the gate (`NO_CLAIM` otherwise). What remains is data, not method: a frozen, SHA-pinned, subject/environment-disjoint measured replay set turns the claim into a passing/failing test. 12 tests cover each refusal path, including the point-above/CI-below case (claim withheld on the CI lower bound even when the point estimate clears the threshold).
+- **Live trust path: sensing-server routes real frames through the governed `StreamingEngine` (parallel governed path with partial output gating).** Previously the live server ran only the *bare* `MultistaticFuser` (fused amplitudes, no trust control plane), while the privacy/provenance/witness engine (ADR-135..146) ran only on synthetic in-test frames — the gap called out in ADR-136 §8 and the beyond-SOTA system review. New `engine_bridge` module drives `StreamingEngine::process_cycle` from the server's live `NodeState` map (reusing the existing `NodeState → MultiBandCsiFrame` conversion), lazily wiring each node as a WorldGraph sensor and bounding belief growth via the retention cap; every *governed belief* carries evidence + model + calibration + privacy decision and a deterministic witness. **Honest scope:** the engine runs alongside (not instead of) the bare fusion path that feeds the live `SensingUpdate`. What its decision gates on the wire today: a cycle emitted at class `Restricted` (base mode or contradiction/mesh-risk demotion) suppresses the per-node raw amplitude vectors from the live publish — the same field mapping `wifi-densepose-bfld`'s privacy gate applies at `Restricted`; gating the remaining derived outputs (person count, classification, signal field) is tracked as a follow-up. Trust state is no longer write-only: the latest witness, effective privacy class, demotion flag, recalibration recommendation, and an engine-error counter are readable on `GET /api/v1/status`, and engine errors are counted + rate-limit logged instead of silently swallowed (`EngineBridge::observe_cycle`). Adds `wifi-densepose-engine/-worldgraph/-bfld/-geo` deps. Bridge tests cover witnessed belief with provenance, determinism, idempotent node registration, retention bound, privacy-mode propagation, trust-state recording, the error-counter path, and Restricted-class raw-output suppression.
+
 ### Fixed
+- **`wifi-densepose-mat` standalone `--no-default-features` build (101 errors → 0).** `pub mod api` was unconditional while its only dependency, serde, is optional behind the `api` feature — so any build without default features failed with unresolved serde imports (masked in `--workspace` runs by feature unification). The `api` module and its `create_router`/`AppState` re-export are now `#[cfg(feature = "api")]`-gated (with docsrs annotations). All feature combos compile: bare `--no-default-features`, `--no-default-features --features api`, and full default (177 tests pass).
+- **WorldGraph no longer grows unboundedly under the live loop.** `StreamingEngine::process_cycle` appended one `SemanticState` belief per cycle with no eviction — ~1.7M nodes/day at 20 Hz (identified in `docs/research/ruview-beyond-sota/04-optimization-roadmap.md`). Added `WorldGraph::prune_semantic_states(max)` — deterministic eviction of the oldest beliefs by `(valid_from_unix_ms, id)`, structural nodes (rooms/zones/sensors/anchors/tracks/events) never eligible — and wired it into the engine after each belief append (`StreamingEngine::DEFAULT_SEMANTIC_RETENTION` = 7,200 ≈ 6 min at 20 Hz; tunable via `set_semantic_retention`). The WorldGraph holds *current* beliefs; durable history is the recorder's job, so no audit data is lost. 3 new tests (bounded growth end-to-end, oldest-only eviction, deterministic tie-break).
 - **ESP32 edge heart rate no longer stuck at ~45 BPM / dropping wildly — #987.** The on-device HR estimator (`edge_processing.c`, `0xC5110002`) reported ~45 BPM regardless of true heart rate (Apple-Watch ground truth 87 BPM read as ~45) and swung frame-to-frame. Two root causes: (1) a hardcoded `sample_rate = 10.0f` that became wrong after #985's self-ping raised the CSI callback rate to a variable ~13–19 Hz — BPM scales as `assumed/actual × true`, so 87 read ~45 and the reading swung as CSI yield fluctuated; (2) the zero-crossing estimator locked onto a breathing harmonic (a 0.25 Hz breathing fundamental puts its 3rd harmonic at ~0.74 Hz ≈ 44 BPM inside the HR band). Fix: measure the real sample rate from inter-frame timestamps (used for BPM conversion + biquad re-tuning on >15% drift); replace the HR zero-crossing with an autocorrelation estimator that rejects breathing harmonics (driven by a robust autocorr breathing period); median-13 smooth the output. Hardware A/B (fixed vs unmodified control board, both `edge_tier=2`): control pegged 40–49 BPM; fixed reaches the true 88–91 BPM (vs 87 GT) and holds a stable physiological value (spread 59→0 for a steady subject). Known limitation: heavy subject motion still degrades the estimate (motion gating is a follow-up).
 - **Person count no longer leaks up to 10 in heuristic mode — addresses #894.** `field_bridge::occupancy_or_fallback` returned the eigenvalue-based `FieldModel::estimate_occupancy` count **unbounded** (its internal ceiling is 10), while the sibling estimators on the same single-link data — the perturbation-energy fallback right below it and `score_to_person_count` — both cap at 3 ("1-3 for single ESP32"). On noisy / under-calibrated CSI the eigenvalue count inflated, producing the "10 persons reported when 1 present" symptom (seen when `--model` fails to load and the server runs on heuristics). Bounded the eigenvalue path to the shared `MAX_SINGLE_LINK_OCCUPANCY` (3) so every estimator on one link agrees; genuine higher counts come from the multistatic fusion path, not a single-link covariance estimate.
 - **MQTT multi-node deployments now create one Home-Assistant device per node — closes #898.** After the #872 MQTT wiring landed, the JSON→`VitalsSnapshot` bridge hard-coded a single `node_id` (the MQTT client id) and the publisher used a single `OwnedDiscoveryBuilder`, so every physical node collapsed into one device (`identifiers:["wifi_densepose_wifi-densepose-1"]`), contradicting the "one device per node" docs. The bridge now emits one snapshot per node in the sensing update's `nodes[]` (each with its own `node_id` + RSSI, falling back to a single aggregate snapshot for wifi/simulate sources), and the publisher derives a per-node builder (`OwnedDiscoveryBuilder::for_node`) that publishes discovery + availability lazily on first sight of each `node_id` and routes state to per-node topics — yielding N distinct HA devices with per-node availability/LWT. Unit-tested (distinct nodes → distinct `wifi_densepose_<node>` identifiers); 71 MQTT tests pass.