ci: Format code

Author: seambot

mintlify-docs/api/acs/credentials/index.mdx

@@ -364,7 +364,7 @@ Visionline-specific metadata for the [credential](https://docs.seam.co/latest/ca
   Card function type in the Visionline access system.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>guest</code>
       - <code>staff</code>

mintlify-docs/api/acs/entrances/index.mdx

@@ -87,7 +87,7 @@ ASSA ABLOY Vostio-specific metadata associated with the [entrance](https://docs.
   Type of the door in the Vostio access system.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>CommonDoor</code>
       - <code>EntranceDoor</code>
@@ -463,7 +463,7 @@ Visionline-specific metadata associated with the [entrance](https://docs.seam.co
   Category of the door in the Visionline access system.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>entrance</code>
       - <code>guest</code>
@@ -502,7 +502,7 @@ Visionline-specific metadata associated with the [entrance](https://docs.seam.co
   Door profile type in the Visionline access system.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>BLE</code>
       - <code>commonDoor</code>

mintlify-docs/api/devices/index.mdx

@@ -2909,7 +2909,7 @@ Metadata for a NoiseAware device.
   Device model for a NoiseAware device.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>indoor</code>
       - <code>outdoor</code>
@@ -3240,7 +3240,7 @@ Metadata for Seam Bridge.
   Unlock method for Seam Bridge.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>bridge</code>
       - <code>doorking</code>
@@ -3870,7 +3870,7 @@ Represents the current status of the battery charge level.
   Represents the current status of the battery charge level. Values are `critical`, which indicates an extremely low level, suggesting imminent shutdown or an urgent need for charging; `low`, which signifies that the battery is under the preferred threshold and should be charged soon; `good`, which denotes a satisfactory charge level, adequate for normal use without the immediate need for recharging; and `full`, which represents a battery that is fully charged, providing the maximum duration of usage.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>critical</code>
       - <code>low</code>
@@ -4309,7 +4309,7 @@ Current climate setting.
   The climate preset mode for the thermostat, based on the available climate preset modes reported by the device.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>home</code>
       - <code>away</code>
@@ -4370,7 +4370,7 @@ Current climate setting.
   Indicates whether the climate preset is owned by the user or the system.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>user</code>
       - <code>system</code>
@@ -4385,7 +4385,7 @@ Current climate setting.
   Desired [fan mode setting](https://docs.seam.co/latest/capability-guides/thermostats/configure-current-climate-settings#fan-mode-settings), such as `on`, `auto`, or `circulate`.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>auto</code>
       - <code>on</code>
@@ -4415,7 +4415,7 @@ Current climate setting.
   Desired [HVAC mode](https://docs.seam.co/latest/capability-guides/thermostats/understanding-thermostat-concepts/hvac-mode) setting, such as `heat`, `cool`, `heat_cool`, or `off`.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>off</code>
       - <code>heat</code>
@@ -4491,7 +4491,7 @@ Current climate setting.
   The climate preset mode for the thermostat, based on the available climate preset modes reported by the device.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>home</code>
       - <code>away</code>
@@ -4552,7 +4552,7 @@ Current climate setting.
   Indicates whether the climate preset is owned by the user or the system.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>user</code>
       - <code>system</code>
@@ -4567,7 +4567,7 @@ Current climate setting.
   Desired [fan mode setting](https://docs.seam.co/latest/capability-guides/thermostats/configure-current-climate-settings#fan-mode-settings), such as `on`, `auto`, or `circulate`.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>auto</code>
       - <code>on</code>
@@ -4597,7 +4597,7 @@ Current climate setting.
   Desired [HVAC mode](https://docs.seam.co/latest/capability-guides/thermostats/understanding-thermostat-concepts/hvac-mode) setting, such as `heat`, `cool`, `heat_cool`, or `off`.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>off</code>
       - <code>heat</code>

mintlify-docs/api/devices/unmanaged/index.mdx

@@ -1555,7 +1555,7 @@ Represents the current status of the battery charge level.
   Represents the current status of the battery charge level. Values are `critical`, which indicates an extremely low level, suggesting imminent shutdown or an urgent need for charging; `low`, which signifies that the battery is under the preferred threshold and should be charged soon; `good`, which denotes a satisfactory charge level, adequate for normal use without the immediate need for recharging; and `full`, which represents a battery that is fully charged, providing the maximum duration of usage.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>critical</code>
       - <code>low</code>

mintlify-docs/api/locks/index.mdx

@@ -2658,7 +2658,7 @@ Metadata for a NoiseAware device.
   Device model for a NoiseAware device.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>indoor</code>
       - <code>outdoor</code>
@@ -3005,7 +3005,7 @@ Metadata for Seam Bridge.
   Unlock method for Seam Bridge.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>bridge</code>
       - <code>doorking</code>

mintlify-docs/api/thermostats/index.mdx

@@ -2144,7 +2144,7 @@ Current climate setting.
   The climate preset mode for the thermostat, based on the available climate preset modes reported by the device.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>home</code>
       - <code>away</code>
@@ -2205,7 +2205,7 @@ Current climate setting.
   Indicates whether the climate preset is owned by the user or the system.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>user</code>
       - <code>system</code>
@@ -2220,7 +2220,7 @@ Current climate setting.
   Desired [fan mode setting](https://docs.seam.co/latest/capability-guides/thermostats/configure-current-climate-settings#fan-mode-settings), such as `on`, `auto`, or `circulate`.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>auto</code>
       - <code>on</code>
@@ -2250,7 +2250,7 @@ Current climate setting.
   Desired [HVAC mode](https://docs.seam.co/latest/capability-guides/thermostats/understanding-thermostat-concepts/hvac-mode) setting, such as `heat`, `cool`, `heat_cool`, or `off`.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>off</code>
       - <code>heat</code>
@@ -2326,7 +2326,7 @@ Current climate setting.
   The climate preset mode for the thermostat, based on the available climate preset modes reported by the device.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>home</code>
       - <code>away</code>
@@ -2387,7 +2387,7 @@ Current climate setting.
   Indicates whether the climate preset is owned by the user or the system.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>user</code>
       - <code>system</code>
@@ -2402,7 +2402,7 @@ Current climate setting.
   Desired [fan mode setting](https://docs.seam.co/latest/capability-guides/thermostats/configure-current-climate-settings#fan-mode-settings), such as `on`, `auto`, or `circulate`.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>auto</code>
       - <code>on</code>
@@ -2432,7 +2432,7 @@ Current climate setting.
   Desired [HVAC mode](https://docs.seam.co/latest/capability-guides/thermostats/understanding-thermostat-concepts/hvac-mode) setting, such as `heat`, `cool`, `heat_cool`, or `off`.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>off</code>
       - <code>heat</code>
@@ -3459,7 +3459,7 @@ Metadata for a NoiseAware device.
   Device model for a NoiseAware device.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>indoor</code>
       - <code>outdoor</code>
@@ -3796,7 +3796,7 @@ Metadata for Seam Bridge.
   Unlock method for Seam Bridge.
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>bridge</code>
       - <code>doorking</code>

mintlify-docs/api/workspaces/index.mdx

@@ -351,7 +351,7 @@ Company name associated with the [workspace](https://docs.seam.co/latest/core-co
   Logo shape for [Connect Webviews](https://docs.seam.co/latest/core-concepts/connect-webviews) in the workspace. See also [Customize the Look and Feel of Your Connect Webviews](https://docs.seam.co/latest/core-concepts/connect-webviews/customizing-connect-webviews#customize-the-look-and-feel-of-your-connect-webviews).
 
   <details>
-  <summary>Enum values:</summary>
+<summary>Enum values:</summary>
 
       - <code>circle</code>
       - <code>square</code>

mintlify-docs/capability-guides/mobile-access/mobile-device-sdks/initializing-the-seam-mobile-sdk.mdx

@@ -508,5 +508,5 @@ fun handleUserInteractionRequired(interaction: SeamRequiredUserInteraction) {
 - `EnableBluetooth`: The user must enable Bluetooth on the device.
 - `GrantPermissions(val permissions: List<String>)`: The user must grant the required permissions.
 - `AppRestartRequired`: The user must restart the app to resolve the issue.
-    </Tab>
-</Tabs>
+  </Tab>
+  </Tabs>