hts221: Migrate camelCase methods to snake_case.

Author: nedseb

lib/hts221/hts221/device.py

@@ -23,9 +23,9 @@ def __init__(self, i2c, address=HTS_I2C_ADDR):
         self._read_humidity_calibration()
 
         # set av conf: T=4 H=8
-        self.setAv(0x81)
+        self.set_av(0x81)
         # set CTRL_REG1: PD=1 BDU=1 ODR=1
-        self.setODR(0x85)
+        self.set_odr(0x85)
 
     def _read_temperature_calibration(self):
         # HTS221 Temp Calibration registers
@@ -57,35 +57,35 @@ def _read_reg16(self, reg):
         return (higherByte << 8) + lowerByte
 
     # Device identification
-    def whoAmI(self):
+    def who_am_i(self):
         return self._read_reg(HTS221_WHO_AM_I)
 
     # get STATUS register
     def status(self):
         return self._read_reg(HTS221_STATUS_REG)
 
     # power control
-    def poweroff(self):
+    def power_off(self):
         t = self._read_reg(HTS221_CTRL_REG1) & 0x7F
         self._write_reg(HTS221_CTRL_REG1, t)
 
-    def poweron(self):
+    def power_on(self):
         t = self._read_reg(HTS221_CTRL_REG1) | 0x80
         self._write_reg(HTS221_CTRL_REG1, t)
 
     # get/set Output data rate
-    def getODR(self):
+    def get_odr(self):
         return self._read_reg(HTS221_CTRL_REG1) & 0x03
 
-    def setODR(self, odr=0):
+    def set_odr(self, odr=0):
         t = self._read_reg(HTS221_CTRL_REG1) & 0xFC
         self._write_reg(HTS221_CTRL_REG1, t | odr)
 
     # get/set Humidity and temperature average configuration
-    def getAv(self):
+    def get_av(self):
         return self._read_reg(HTS221_AV_CONF)
 
-    def setAv(self, av=0):
+    def set_av(self, av=0):
         self._write_reg(HTS221_AV_CONF, av)
 
     # one-shot / auto-trigger helpers

tests/scenarios/board_temperature_comparison.yaml

@@ -33,9 +33,9 @@ tests:
       # HTS221
       from hts221.device import HTS221
       hts = HTS221(i2c)
-      hts.poweroff()
+      hts.power_off()
       sleep_ms(20)
-      hts.poweron()
+      hts.power_on()
       sleep_ms(50)
       temps['HTS221'] = hts.temperature()
 
@@ -92,9 +92,9 @@ tests:
 
       from hts221.device import HTS221
       hts = HTS221(i2c)
-      hts.poweroff()
+      hts.power_off()
       sleep_ms(20)
-      hts.poweron()
+      hts.power_on()
       sleep_ms(50)
       t_hts = hts.temperature()
 
@@ -129,9 +129,9 @@ tests:
 
       from hts221.device import HTS221
       hts = HTS221(i2c)
-      hts.poweroff()
+      hts.power_off()
       sleep_ms(20)
-      hts.poweron()
+      hts.power_on()
       sleep_ms(50)
 
       from wsen_pads.device import WSEN_PADS

tests/scenarios/hts221.yaml

@@ -51,7 +51,7 @@ tests:
 
   - name: "Read WHO_AM_I via method"
     action: call
-    method: whoAmI
+    method: who_am_i
     expect: 0xBC
     mode: [mock, hardware]
 
@@ -88,15 +88,15 @@ tests:
   - name: "Auto-trigger temperature after poweroff"
     action: call
     setup:
-      - method: poweroff
+      - method: power_off
     method: temperature
     expect_not_none: true
     mode: [mock]
 
   - name: "Auto-trigger humidity after poweroff"
     action: call
     setup:
-      - method: poweroff
+      - method: power_off
     method: humidity
     expect_not_none: true
     mode: [mock]
@@ -139,7 +139,7 @@ tests:
   - name: "Timeout raises OSError when data never ready"
     action: script
     script: |
-      dev.poweroff()
+      dev.power_off()
       i2c._registers[0x27] = bytes([0x00])
       try:
           dev.temperature()
@@ -157,7 +157,7 @@ tests:
       from hts221.device import HTS221
       i2c = I2C(1)
       sensor = HTS221(i2c)
-      sensor.poweroff()
+      sensor.power_off()
       t = sensor.temperature()
       result = 10.0 <= t <= 45.0
     expect_true: true