hwmon: (pmbus/adm1266) don't clobber GPIO bits before PDIO read in get_multiple

adm1266_gpio_get_multiple() zeroes *bits before the GPIO_STATUS loop
and then a second time before the PDIO_STATUS loop:

	*bits = 0;
	for_each_set_bit(gpio_nr, mask, ADM1266_GPIO_NR) {
		...
		set_bit(gpio_nr, bits);
	}

	ret = i2c_smbus_read_block_data(data->client, ADM1266_PDIO_STATUS, ...);
	...
	*bits = 0;
	for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_NR) {
		...
		set_bit(gpio_nr, bits);
	}

The second *bits = 0 throws away every GPIO bit the first loop just
populated, so callers asking for any combination of GPIO and PDIO
pins always see the GPIO portion of the returned bits as zero.

Drop the redundant second assignment so both halves of the result
survive.

Fixes: d98dfad ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-2-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Author: abdurrahman-nexthop

drivers/hwmon/pmbus/adm1266.c

@@ -211,7 +211,6 @@ static int adm1266_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask
 
 	status = read_buf[0] + (read_buf[1] << 8);
 
-	*bits = 0;
 	for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_NR) {
 		if (test_bit(gpio_nr - ADM1266_GPIO_NR, &status))
 			set_bit(gpio_nr, bits);