Merge tag 'linux-watchdog-5.15-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - add Mediatek MT7986 & MT8195 wdt support

 - add Maxim MAX63xx

 - drop bd70528 support

 - rewrite ixp4xx to watchdog framework

 - constify static struct watchdog_ops for sl28cpld_wdt, mpc8xxx_wdt and
   tqmx86

 - introduce watchdog_dev_suspend/resume

 - several fixes and improvements

* tag 'linux-watchdog-5.15-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  dt-bindings: watchdog: Add compatible for Mediatek MT7986
  watchdog: ixp4xx: Rewrite driver to use core
  watchdog: Start watchdog in watchdog_set_last_hw_keepalive only if appropriate
  watchdog: max63xx_wdt: Add device tree probing
  dt-bindings: watchdog: Add Maxim MAX63xx bindings
  watchdog: mediatek: mt8195: add wdt support
  dt-bindings: reset: mt8195: add toprgu reset-controller header file
  watchdog: tqmx86: Constify static struct watchdog_ops
  watchdog: mpc8xxx_wdt: Constify static struct watchdog_ops
  watchdog: sl28cpld_wdt: Constify static struct watchdog_ops
  watchdog: iTCO_wdt: Fix detection of SMI-off case
  watchdog: bcm2835_wdt: consider system-power-controller property
  watchdog: imx2_wdg: notify wdog core to stop ping worker on suspend
  watchdog: introduce watchdog_dev_suspend/resume
  watchdog: Fix NULL pointer dereference when releasing cdev
  watchdog: only run driver set_pretimeout op if device supports it
  watchdog: bd70528 drop bd70528 support

Author: torvalds

Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml

@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/maxim,max63xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 63xx Watchdog Timers
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+maintainers:
+  - Marc Zyngier <maz@kernel.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: maxim,max6369
+      - const: maxim,max6370
+      - const: maxim,max6371
+      - const: maxim,max6372
+      - const: maxim,max6373
+      - const: maxim,max6374
+
+  reg:
+    description: This is a 1-byte memory-mapped address
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    wdt: watchdog@50000000 {
+        compatible = "maxim,max6369";
+        reg = <0x50000000 0x1>;
+        timeout-sec = <10>;
+    };
+
+...

Documentation/devicetree/bindings/watchdog/mtk-wdt.txt

@@ -13,6 +13,7 @@ Required properties:
 	"mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622
 	"mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623
 	"mediatek,mt7629-wdt", "mediatek,mt6589-wdt": for MT7629
+	"mediatek,mt7986-wdt", "mediatek,mt6589-wdt": for MT7986
 	"mediatek,mt8183-wdt": for MT8183
 	"mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
 	"mediatek,mt8192-wdt": for MT8192

drivers/watchdog/Kconfig

@@ -168,18 +168,6 @@ config SOFT_WATCHDOG_PRETIMEOUT
 	  watchdog. Be aware that governors might affect the watchdog because it
 	  is purely software, e.g. the panic governor will stall it!
 
-config BD70528_WATCHDOG
-	tristate "ROHM BD70528 PMIC Watchdog"
-	depends on MFD_ROHM_BD70528
-	select WATCHDOG_CORE
-	help
-	  Support for the watchdog in the ROHM BD70528 PMIC. Watchdog trigger
-	  cause system reset.
-
-	  Say Y here to include support for the ROHM BD70528 watchdog.
-	  Alternatively say M to compile the driver as a module,
-	  which will be called bd70528_wdt.
-
 config BD957XMUF_WATCHDOG
 	tristate "ROHM BD9576MUF and BD9573MUF PMIC Watchdog"
 	depends on MFD_ROHM_BD957XMUF

drivers/watchdog/Makefile

@@ -204,7 +204,6 @@ obj-$(CONFIG_WATCHDOG_SUN4V)		+= sun4v_wdt.o
 obj-$(CONFIG_XEN_WDT) += xen_wdt.o
 
 # Architecture Independent
-obj-$(CONFIG_BD70528_WATCHDOG) += bd70528_wdt.o
 obj-$(CONFIG_BD957XMUF_WATCHDOG) += bd9576_wdt.o
 obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
 obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o

drivers/watchdog/bcm2835_wdt.c

@@ -205,9 +205,13 @@ static int bcm2835_wdt_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
-	if (pm_power_off == NULL) {
-		pm_power_off = bcm2835_power_off;
-		bcm2835_power_off_wdt = wdt;
+	if (of_device_is_system_power_controller(pdev->dev.parent->of_node)) {
+		if (!pm_power_off) {
+			pm_power_off = bcm2835_power_off;
+			bcm2835_power_off_wdt = wdt;
+		} else {
+			dev_info(dev, "Poweroff handler already present!\n");
+		}
 	}
 
 	dev_info(dev, "Broadcom BCM2835 watchdog timer");

drivers/watchdog/bd70528_wdt.c

@@ -362,7 +362,7 @@ static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t)
 	 * Otherwise, the BIOS generally reboots when the SMI triggers.
 	 */
 	if (p->smi_res &&
-	    (SMI_EN(p) & (TCO_EN | GBL_SMI_EN)) != (TCO_EN | GBL_SMI_EN))
+	    (inl(SMI_EN(p)) & (TCO_EN | GBL_SMI_EN)) != (TCO_EN | GBL_SMI_EN))
 		tmrval /= 2;
 
 	/* from the specs: */