Merge tag 'gpio-updates-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "We mostly have various improvements and refactoring all over the place
  but also some interesting new features - like the virtio GPIO driver
  that allows guest VMs to use host's GPIOs. We also have a new/old GPIO
  driver for rockchip - this one has been split out of the pinctrl
  driver.

  Summary:

   - new driver: gpio-virtio allowing a guest VM running linux to access
     GPIO lines provided by the host

   - split the GPIO driver out of the rockchip pin control driver

   - add support for a new model to gpio-aspeed-sgpio, refactor the
     driver and use generic device property interfaces, improve property
     sanitization

   - add ACPI support to gpio-tegra186

   - improve the code setting the line names to support multiple GPIO
     banks per device

   - constify a bunch of OF functions in the core GPIO code and make the
     declaration for one of the core OF functions we use consistent
     within its header

   - use software nodes in intel_quark_i2c_gpio

   - add support for the gpio-line-names property in gpio-mt7621

   - use the standard GPIO function for setting the GPIO names in
     gpio-brcmstb

   - fix a bunch of leaks and other bugs in gpio-mpc8xxx

   - use generic pm callbacks in gpio-ml-ioh

   - improve resource management and PM handling in gpio-mlxbf2

   - modernize and improve the gpio-dwapb driver

   - coding style improvements in gpio-rcar

   - documentation fixes and improvements

   - update the MAINTAINERS entry for gpio-zynq

   - minor tweaks in several drivers"

* tag 'gpio-updates-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (35 commits)
  gpio: mpc8xxx: Use 'devm_gpiochip_add_data()' to simplify the code and avoid a leak
  gpio: mpc8xxx: Fix a potential double iounmap call in 'mpc8xxx_probe()'
  gpio: mpc8xxx: Fix a resources leak in the error handling path of 'mpc8xxx_probe()'
  gpio: viperboard: remove platform_set_drvdata() call in probe
  gpio: virtio: Add missing mailings lists in MAINTAINERS entry
  gpio: virtio: Fix sparse warnings
  gpio: remove the obsolete MX35 3DS BOARD MC9S08DZ60 GPIO functions
  gpio: max730x: Use the right include
  gpio: Add virtio-gpio driver
  gpio: mlxbf2: Use DEFINE_RES_MEM_NAMED() helper macro
  gpio: mlxbf2: Use devm_platform_ioremap_resource()
  gpio: mlxbf2: Drop wrong use of ACPI_PTR()
  gpio: mlxbf2: Convert to device PM ops
  gpio: dwapb: Get rid of legacy platform data
  mfd: intel_quark_i2c_gpio: Convert GPIO to use software nodes
  gpio: dwapb: Read GPIO base from gpio-base property
  gpio: dwapb: Unify ACPI enumeration checks in get_irq() and configure_irqs()
  gpiolib: Deduplicate forward declaration in the consumer.h header
  MAINTAINERS: update gpio-zynq.yaml reference
  gpio: tegra186: Add ACPI support
  ...

Author: torvalds

Documentation/driver-api/gpio/consumer.rst

@@ -72,6 +72,10 @@ for the GPIO. Values can be:
 * GPIOD_OUT_HIGH_OPEN_DRAIN same as GPIOD_OUT_HIGH but also enforce the line
   to be electrically used with open drain.
 
+Note that the initial value is *logical* and the physical line level depends on
+whether the line is configured active high or active low (see
+:ref:`active_low_semantics`).
+
 The two last flags are used for use cases where open drain is mandatory, such
 as I2C: if the line is not already configured as open drain in the mappings
 (see board.txt), then open drain will be enforced anyway and a warning will be
@@ -252,6 +256,8 @@ that can't be accessed from hardIRQ handlers, these calls act the same as the
 spinlock-safe calls.
 
 
+.. _active_low_semantics:
+
 The active low and open drain semantics
 ---------------------------------------
 As a consumer should not have to care about the physical line level, all of the
@@ -309,9 +315,11 @@ work on the raw line value::
 	void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
 	int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
 
-The active low state of a GPIO can also be queried using the following call::
+The active low state of a GPIO can also be queried and toggled using the
+following calls::
 
 	int gpiod_is_active_low(const struct gpio_desc *desc)
+	void gpiod_toggle_active_low(struct gpio_desc *desc)
 
 Note that these functions should only be used with great moderation; a driver
 should not have to care about the physical line level or open drain semantics.

Documentation/driver-api/gpio/driver.rst

@@ -547,13 +547,10 @@ To use the helpers please keep the following in mind:
   the irqchip can initialize. E.g. .dev and .can_sleep shall be set up
   properly.
 
-- Nominally set all handlers to handle_bad_irq() in the setup call and pass
-  handle_bad_irq() as flow handler parameter in gpiochip_irqchip_add() if it is
-  expected for GPIO driver that irqchip .set_type() callback will be called
-  before using/enabling each GPIO IRQ. Then set the handler to
-  handle_level_irq() and/or handle_edge_irq() in the irqchip .set_type()
-  callback depending on what your controller supports and what is requested
-  by the consumer.
+- Nominally set gpio_irq_chip.handler to handle_bad_irq. Then, if your irqchip
+  is cascaded, set the handler to handle_level_irq() and/or handle_edge_irq()
+  in the irqchip .set_type() callback depending on what your controller
+  supports and what is requested by the consumer.
 
 
 Locking IRQ usage

MAINTAINERS

@@ -19852,6 +19852,15 @@ F:	Documentation/filesystems/virtiofs.rst
 F:	fs/fuse/virtio_fs.c
 F:	include/uapi/linux/virtio_fs.h
 
+VIRTIO GPIO DRIVER
+M:	Enrico Weigelt, metux IT consult <info@metux.net>
+M:	Viresh Kumar <vireshk@kernel.org>
+L:	linux-gpio@vger.kernel.org
+L:	virtualization@lists.linux-foundation.org
+S:	Maintained
+F:	drivers/gpio/gpio-virtio.c
+F:	include/uapi/linux/virtio_gpio.h
+
 VIRTIO GPU DRIVER
 M:	David Airlie <airlied@linux.ie>
 M:	Gerd Hoffmann <kraxel@redhat.com>
@@ -20546,7 +20555,7 @@ R:	Srinivas Neeli <srinivas.neeli@xilinx.com>
 R:	Michal Simek <michal.simek@xilinx.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
-F:	Documentation/devicetree/bindings/gpio/gpio-zynq.txt
+F:	Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
 F:	drivers/gpio/gpio-xilinx.c
 F:	drivers/gpio/gpio-zynq.c
 

drivers/gpio/Kconfig

@@ -1018,12 +1018,6 @@ config GPIO_MAX732X_IRQ
 	  Say yes here to enable the max732x to be used as an interrupt
 	  controller. It requires the driver to be built in the kernel.
 
-config GPIO_MC9S08DZ60
-	bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
-	depends on I2C=y && MACH_MX35_3DS
-	help
-	  Select this to enable the MC9S08DZ60 GPIO driver
-
 config GPIO_PCA953X
 	tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
 	select REGMAP_I2C
@@ -1677,6 +1671,15 @@ config GPIO_MOCKUP
 	  tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in
 	  it.
 
+config GPIO_VIRTIO
+	tristate "VirtIO GPIO support"
+	depends on VIRTIO
+	help
+	  Say Y here to enable guest support for virtio-based GPIO controllers.
+
+	  These virtual GPIOs can be routed to real GPIOs or attached to
+	  simulators on the host (like QEMU).
+
 endmenu
 
 endif

drivers/gpio/Makefile

@@ -92,7 +92,6 @@ obj-$(CONFIG_GPIO_MAX77620)		+= gpio-max77620.o
 obj-$(CONFIG_GPIO_MAX77650)		+= gpio-max77650.o
 obj-$(CONFIG_GPIO_MB86S7X)		+= gpio-mb86s7x.o
 obj-$(CONFIG_GPIO_MC33880)		+= gpio-mc33880.o
-obj-$(CONFIG_GPIO_MC9S08DZ60)		+= gpio-mc9s08dz60.o
 obj-$(CONFIG_GPIO_MENZ127)		+= gpio-menz127.o
 obj-$(CONFIG_GPIO_MERRIFIELD)		+= gpio-merrifield.o
 obj-$(CONFIG_GPIO_ML_IOH)		+= gpio-ml-ioh.o
@@ -166,6 +165,7 @@ obj-$(CONFIG_GPIO_UCB1400)		+= gpio-ucb1400.o
 obj-$(CONFIG_GPIO_UNIPHIER)		+= gpio-uniphier.o
 obj-$(CONFIG_GPIO_VF610)		+= gpio-vf610.o
 obj-$(CONFIG_GPIO_VIPERBOARD)		+= gpio-viperboard.o
+obj-$(CONFIG_GPIO_VIRTIO)		+= gpio-virtio.o
 obj-$(CONFIG_GPIO_VISCONTI)		+= gpio-visconti.o
 obj-$(CONFIG_GPIO_VR41XX)		+= gpio-vr41xx.o
 obj-$(CONFIG_GPIO_VX855)		+= gpio-vx855.o