Merge tag 'ata-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux

Pull ata fixes from Damien Le Moal:

 - Interrupt initialization and handling fixes for the Designware
   ahci_dwc driver (Rosen)

 - Avoid possible infinite loop when scanning completion in the
   Designware ahci_dwc driver (Rosen)

* tag 'ata-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning
  ata: sata_dwc_460ex: fix clear_interrupt_bit() clearing all pending interrupts
  ata: sata_dwc_460ex: use platform_get_irq()
  ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered

Author: torvalds

drivers/ata/sata_dwc_460ex.c

@@ -19,7 +19,6 @@
 #include <linux/device.h>
 #include <linux/dmaengine.h>
 #include <linux/of.h>
-#include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
 #include <linux/libata.h>
@@ -226,7 +225,6 @@ static int sata_dwc_dma_init_old(struct platform_device *pdev,
 				 struct sata_dwc_device *hsdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
 
 	hsdev->dma = devm_kzalloc(dev, sizeof(*hsdev->dma), GFP_KERNEL);
 	if (!hsdev->dma)
@@ -236,11 +234,9 @@ static int sata_dwc_dma_init_old(struct platform_device *pdev,
 	hsdev->dma->id = pdev->id;
 
 	/* Get SATA DMA interrupt number */
-	hsdev->dma->irq = irq_of_parse_and_map(np, 1);
-	if (!hsdev->dma->irq) {
-		dev_err(dev, "no SATA DMA irq\n");
-		return -ENODEV;
-	}
+	hsdev->dma->irq = platform_get_irq(pdev, 1);
+	if (hsdev->dma->irq < 0)
+		return hsdev->dma->irq;
 
 	/* Get physical SATA DMA register base address */
 	hsdev->dma->regs = devm_platform_ioremap_resource(pdev, 1);
@@ -398,8 +394,7 @@ static void clear_serror(struct ata_port *ap)
 
 static void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit)
 {
-	sata_dwc_writel(&hsdev->sata_dwc_regs->intpr,
-			sata_dwc_readl(&hsdev->sata_dwc_regs->intpr));
+	sata_dwc_writel(&hsdev->sata_dwc_regs->intpr, bit);
 }
 
 static u32 qcmd_tag_to_mask(u8 tag)
@@ -612,14 +607,9 @@ static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
 	status = ap->ops->sff_check_status(ap);
 	dev_dbg(ap->dev, "%s ATA status register=0x%x\n", __func__, status);
 
-	tag = 0;
 	while (tag_mask) {
-		while (!(tag_mask & 0x00000001)) {
-			tag++;
-			tag_mask <<= 1;
-		}
-
-		tag_mask &= (~0x00000001);
+		tag = __ffs(tag_mask);
+		tag_mask &= ~(1U << tag);
 		qc = ata_qc_from_tag(ap, tag);
 		if (unlikely(!qc)) {
 			dev_err(ap->dev, "failed to get qc");
@@ -1126,7 +1116,6 @@ static const struct ata_port_info sata_dwc_port_info[] = {
 static int sata_dwc_probe(struct platform_device *ofdev)
 {
 	struct device *dev = &ofdev->dev;
-	struct device_node *np = dev->of_node;
 	struct sata_dwc_device *hsdev;
 	u32 idr, versionr;
 	char *ver = (char *)&versionr;
@@ -1169,18 +1158,13 @@ static int sata_dwc_probe(struct platform_device *ofdev)
 	/* Save dev for later use in dev_xxx() routines */
 	hsdev->dev = dev;
 
-	/* Enable SATA Interrupts */
-	sata_dwc_enable_interrupts(hsdev);
-
 	/* Get SATA interrupt number */
-	irq = irq_of_parse_and_map(np, 0);
-	if (!irq) {
-		dev_err(dev, "no SATA DMA irq\n");
-		return -ENODEV;
-	}
+	irq = platform_get_irq(ofdev, 0);
+	if (irq < 0)
+		return irq;
 
 #ifdef CONFIG_SATA_DWC_OLD_DMA
-	if (!of_property_present(np, "dmas")) {
+	if (!of_property_present(dev->of_node, "dmas")) {
 		err = sata_dwc_dma_init_old(ofdev, hsdev);
 		if (err)
 			return err;
@@ -1204,6 +1188,8 @@ static int sata_dwc_probe(struct platform_device *ofdev)
 	if (err)
 		dev_err(dev, "failed to activate host");
 
+	/* Enable SATA Interrupts */
+	sata_dwc_enable_interrupts(hsdev);
 	return 0;
 
 error_out: