Merge tag 'irq_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq fixes from Borislav Petkov:

 - Fix a /proc/interrupts formatting regression

 - Have the BCM2836 interrupt controller enter power management states
   properly

 - Other fixlets

* tag 'irq_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/stm32mp-exti: CONFIG_STM32MP_EXTI should not default to y when compile-testing
  genirq/proc: Add missing space separator back
  irqchip/bcm2836: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
  irqchip/gic-v3: Fix irq_complete_ack() comment

Author: torvalds

drivers/irqchip/Kconfig

@@ -415,7 +415,7 @@ config PARTITION_PERCPU
 config STM32MP_EXTI
 	tristate "STM32MP extended interrupts and event controller"
 	depends on (ARCH_STM32 && !ARM_SINGLE_ARMV7M) || COMPILE_TEST
-	default y
+	default ARCH_STM32 && !ARM_SINGLE_ARMV7M
 	select IRQ_DOMAIN_HIERARCHY
 	select GENERIC_IRQ_CHIP
 	help

drivers/irqchip/irq-bcm2836.c

@@ -58,6 +58,7 @@ static struct irq_chip bcm2836_arm_irqchip_timer = {
 	.name		= "bcm2836-timer",
 	.irq_mask	= bcm2836_arm_irqchip_mask_timer_irq,
 	.irq_unmask	= bcm2836_arm_irqchip_unmask_timer_irq,
+	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
 };
 
 static void bcm2836_arm_irqchip_mask_pmu_irq(struct irq_data *d)
@@ -74,6 +75,7 @@ static struct irq_chip bcm2836_arm_irqchip_pmu = {
 	.name		= "bcm2836-pmu",
 	.irq_mask	= bcm2836_arm_irqchip_mask_pmu_irq,
 	.irq_unmask	= bcm2836_arm_irqchip_unmask_pmu_irq,
+	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
 };
 
 static void bcm2836_arm_irqchip_mask_gpu_irq(struct irq_data *d)
@@ -88,6 +90,7 @@ static struct irq_chip bcm2836_arm_irqchip_gpu = {
 	.name		= "bcm2836-gpu",
 	.irq_mask	= bcm2836_arm_irqchip_mask_gpu_irq,
 	.irq_unmask	= bcm2836_arm_irqchip_unmask_gpu_irq,
+	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
 };
 
 static void bcm2836_arm_irqchip_dummy_op(struct irq_data *d)

drivers/irqchip/irq-gic-v3.c

@@ -817,7 +817,7 @@ static void gic_deactivate_unhandled(u32 irqnr)
  *     register state is not stale, as these may have been indirectly written
  *     *after* exception entry.
  *
- * (2) Deactivate the interrupt when EOI mode 1 is in use.
+ * (2) Execute an interrupt priority drop when EOI mode 1 is in use.
  */
 static inline void gic_complete_ack(u32 irqnr)
 {

kernel/irq/proc.c

@@ -501,17 +501,18 @@ int show_interrupts(struct seq_file *p, void *v)
 
 		seq_put_decimal_ull_width(p, " ", cnt, 10);
 	}
+	seq_putc(p, ' ');
 
 	raw_spin_lock_irqsave(&desc->lock, flags);
 	if (desc->irq_data.chip) {
 		if (desc->irq_data.chip->irq_print_chip)
 			desc->irq_data.chip->irq_print_chip(&desc->irq_data, p);
 		else if (desc->irq_data.chip->name)
-			seq_printf(p, " %8s", desc->irq_data.chip->name);
+			seq_printf(p, "%8s", desc->irq_data.chip->name);
 		else
-			seq_printf(p, " %8s", "-");
+			seq_printf(p, "%8s", "-");
 	} else {
-		seq_printf(p, " %8s", "None");
+		seq_printf(p, "%8s", "None");
 	}
 	if (desc->irq_data.domain)
 		seq_printf(p, " %*lu", prec, desc->irq_data.hwirq);