Explanation of the error
I downloaded and installed the RootlessJamesDSP equaliser application from GitHub. I then performed the necessary steps with Shizuku. The application requires the sound monitor to function. The sound monitor works in conjunction with the screen monitor. When I run the application, a red monitor icon appears in the top right corner of the screen.
The first time the red monitor icon (screen and sound monitor) appeared on the screen, Fennec and Cromite crashed.
When I pressed the close button in the Rootlessjamesdsp application, the screen monitor closed. However, Cromite continues to crash every time it is opened.
But since that day, Fennec has never crashed. However, every time it starts up, it freezes for 8-10 minutes, lags, responds slowly, and uses 100% of the processor. This problem has never been fixed.
Cromite was on the list of affected applications in the Rootlessjamesdsp application, but Fennec was not. I added Fennec and Cromite to the list of excluded applications in the RootlessJamesDSP application. Despite this, Fennec continues to freeze and respond slowly. Cromite also continues to crash. When I force Rootlessjamesdsp to stop, Fennec continues to freeze and respond slowly; Cromite continues to crash on startup. When I force Fennec to stop and restart it, it also freeze and respond slowly. Cromite to stop and restart it, it also crashes. Even if the screen monitor is running, it freeze during operation.
Hoping the issue could be resolved, I updated. (not uninstall->reinstall) the same version of Fenned and Cromite. It did not fix the problem.
When I run or open Fennec,it
freezing; Cromite is it crashing.
If I wait 8-10 minutes, Fennec's freezing, lagging, and slow response issues resolve themselves. The issue of the processor running at full capacity also resolves itself.
If I press the wait button and wait a bit, Cromite opens.
Fennec crashed once. It crashed immediately after the shizuku process. Fennec is not on the list of affected applications. After these tests, I also added Fennec to the "Excluded applications" list. Despite this, the freezing issue persists; there are no crashes.
Cromite crashed once. It crashed immediately after the shizuku process. Cromite is on the list of affected applications. After these tests, I also added Cromite to the "Excluded applications" list. Despite this, the crash issue persists.
Even though the screen viewer is not running, Fennec experiences freezing issues; Cromite also experiences crash issues.
Steps required to reproduce the error
-
Install the RootlessJamesDSP application.
-
Enable and launch shizuku using wireless debugging.
-
The commands displayed on the RootlessJamesDSP startup screen can be executed in Termux using shizuku rish.
-
Press the RootlessJamesDSP enable/disable button.
-
The screen monitor(viewer) is now active to monitoring the audio. Fennec and Cromite has crashed.
-
First experiment/attempt: When I pressed the close button in the Rootlessjamesdsp application, the screen monitor closed. But Fennec continues to freeze, lag, respond slowly, and use the processor at full capacity. Cromite continues to crash every time it starts up.
-
Second attempt: deneme: Fennec was not listed among the affected applications in the Rootlessjamesdsp application. I added Fennec and Cromite to the list of excluded applications in the application. Despite Fennec, it keeps freezing. It continues to freeze for 8-10 minutes every time it is started; Despite Cromite, it continues to crash. It crashes on every startup.
-
Third attempt: When I force Rootlessjamesdsp to stop, Fennec still freezed on every launch; Cromite still crashes on every launch.
-
Fourth attempt: When I force Fennec or Cromite to stop and restart it, it Fennec freezed or Cromite crashes.
-
Fifth attempt: Even when the screen monitor(viewer) is running, it crashes during operation. It crashes on every startup.
-
Sixth attempt: Hoping to resolve the issue, I reinstalled the same version of Fennec and Cromite. (Without uninstalling the browsers, I reinstalled the same version that was already installed using the "update" option.) The problem was not resolved. The same issues continue to occur.
Fennec freezes every time I run it or start it up. After waiting a bit (8-10 min.), Fennec returns to normal. I can use it this way.
Cromite crashes every time I run it or every time it starts up. If I press the wait button and wait a bit, Cromite works. This is how I am able to use it.
Expected behavior
The necessary bug fixes must be made to prevent Fennec from freezing (or other similar problems) every time it is launched/started or Cromite from crashing every time it is launched.
Status Update
I'm pretty sure the thing that triggered the problem was RootlessJamesDSP enabling screen monitoring.
Cromite crashed on startup. After pressing the "Wait" button, Cromite would freeze for several tens of seconds, unable to do anything, showing a black screen. It did more than just freeze; it didn't respond at all. It was using 100% CPU. It did this every time I launched it. After waiting a few tens of seconds, Cromite would recover.
Then it wouldn't freeze or lag anymore.
Fennec doesn't crash on startup. However, it spins and lags for the first 8-10 minutes.
The problem that started 6 days later
The FENNEC delayed response issue persists 8-10 minutes after it is opened/launched. It doesn't freeze, it responds. But it responds slowly. CPU usage is not 100%. And CPU usage is high.
Now I'll uninstall Fennec (remove the app) and reinstall it.
Android version: 15
Android SDK version: 35
Min SDK version: 28
Build Number: RMX3890GDPR_15.C.47
Codename: REL
VM (Virtual Machine): ART
Build ID: AQ3A.240812.002
Core Version: 5.15.167-android13-8-g78b06c70cd59_#1 Thu Aug 14 12:02:04 UTC 2025
Device;
Model: RMX3890
Product: RMX3890TR
Project ID Code: RE5C91L1
My Device's Model Name: 12 Lite (4G)
Model name in other countries: C67 (4G)
ABI: arm64-v8a (64-bit arm CPU)
ABIs: arm64-v8a, armeabi-v7a, armeabi
Processor cores: 8
Processer: Qualcomm® Snapdragon™ 685 Octa-Core
CPU hardware: QTI SM6225
GPU, OpenGL ES version: 3.2
GPU, Vulkan version: 1.1.0
GPU: Qualcomm® Adreno™ 610
Board: bengal
Explanation of the error
I downloaded and installed the RootlessJamesDSP equaliser application from GitHub. I then performed the necessary steps with Shizuku. The application requires the sound monitor to function. The sound monitor works in conjunction with the screen monitor. When I run the application, a red monitor icon appears in the top right corner of the screen.
The first time the red monitor icon (screen and sound monitor) appeared on the screen, Fennec and Cromite crashed.
When I pressed the close button in the Rootlessjamesdsp application, the screen monitor closed. However, Cromite continues to crash every time it is opened.
But since that day, Fennec has never crashed. However, every time it starts up, it freezes for 8-10 minutes, lags, responds slowly, and uses 100% of the processor. This problem has never been fixed.
Cromite was on the list of affected applications in the Rootlessjamesdsp application, but Fennec was not. I added Fennec and Cromite to the list of excluded applications in the RootlessJamesDSP application. Despite this, Fennec continues to freeze and respond slowly. Cromite also continues to crash. When I force Rootlessjamesdsp to stop, Fennec continues to freeze and respond slowly; Cromite continues to crash on startup. When I force Fennec to stop and restart it, it also freeze and respond slowly. Cromite to stop and restart it, it also crashes. Even if the screen monitor is running, it freeze during operation.
Hoping the issue could be resolved, I updated. (not uninstall->reinstall) the same version of Fenned and Cromite. It did not fix the problem.
When I run or open Fennec,it
freezing; Cromite is it crashing.
If I wait 8-10 minutes, Fennec's freezing, lagging, and slow response issues resolve themselves. The issue of the processor running at full capacity also resolves itself.
If I press the wait button and wait a bit, Cromite opens.
Fennec crashed once. It crashed immediately after the shizuku process. Fennec is not on the list of affected applications. After these tests, I also added Fennec to the "Excluded applications" list. Despite this, the freezing issue persists; there are no crashes.
Cromite crashed once. It crashed immediately after the shizuku process. Cromite is on the list of affected applications. After these tests, I also added Cromite to the "Excluded applications" list. Despite this, the crash issue persists.
Even though the screen viewer is not running, Fennec experiences freezing issues; Cromite also experiences crash issues.
Steps required to reproduce the error
Install the RootlessJamesDSP application.
Enable and launch shizuku using wireless debugging.
The commands displayed on the RootlessJamesDSP startup screen can be executed in Termux using shizuku rish.
Press the RootlessJamesDSP enable/disable button.
The screen monitor(viewer) is now active to monitoring the audio. Fennec and Cromite has crashed.
First experiment/attempt: When I pressed the close button in the Rootlessjamesdsp application, the screen monitor closed. But Fennec continues to freeze, lag, respond slowly, and use the processor at full capacity. Cromite continues to crash every time it starts up.
Second attempt: deneme: Fennec was not listed among the affected applications in the Rootlessjamesdsp application. I added Fennec and Cromite to the list of excluded applications in the application. Despite Fennec, it keeps freezing. It continues to freeze for 8-10 minutes every time it is started; Despite Cromite, it continues to crash. It crashes on every startup.
Third attempt: When I force Rootlessjamesdsp to stop, Fennec still freezed on every launch; Cromite still crashes on every launch.
Fourth attempt: When I force Fennec or Cromite to stop and restart it, it Fennec freezed or Cromite crashes.
Fifth attempt: Even when the screen monitor(viewer) is running, it crashes during operation. It crashes on every startup.
Sixth attempt: Hoping to resolve the issue, I reinstalled the same version of Fennec and Cromite. (Without uninstalling the browsers, I reinstalled the same version that was already installed using the "update" option.) The problem was not resolved. The same issues continue to occur.
Fennec freezes every time I run it or start it up. After waiting a bit (8-10 min.), Fennec returns to normal. I can use it this way.
Cromite crashes every time I run it or every time it starts up. If I press the wait button and wait a bit, Cromite works. This is how I am able to use it.
Expected behavior
The necessary bug fixes must be made to prevent Fennec from freezing (or other similar problems) every time it is launched/started or Cromite from crashing every time it is launched.
Status Update
I'm pretty sure the thing that triggered the problem was RootlessJamesDSP enabling screen monitoring.
Cromite crashed on startup. After pressing the "Wait" button, Cromite would freeze for several tens of seconds, unable to do anything, showing a black screen. It did more than just freeze; it didn't respond at all. It was using 100% CPU. It did this every time I launched it. After waiting a few tens of seconds, Cromite would recover.
Then it wouldn't freeze or lag anymore.
Fennec doesn't crash on startup. However, it spins and lags for the first 8-10 minutes.
The problem that started 6 days later
The FENNEC delayed response issue persists 8-10 minutes after it is opened/launched. It doesn't freeze, it responds. But it responds slowly. CPU usage is not 100%. And CPU usage is high.
Now I'll uninstall Fennec (remove the app) and reinstall it.
Android version: 15
Android SDK version: 35
Min SDK version: 28
Build Number: RMX3890GDPR_15.C.47
Codename: REL
VM (Virtual Machine): ART
Build ID: AQ3A.240812.002
Core Version: 5.15.167-android13-8-g78b06c70cd59_#1 Thu Aug 14 12:02:04 UTC 2025
Device;
Model: RMX3890
Product: RMX3890TR
Project ID Code: RE5C91L1
My Device's Model Name: 12 Lite (4G)
Model name in other countries: C67 (4G)
ABI: arm64-v8a (64-bit arm CPU)
ABIs: arm64-v8a, armeabi-v7a, armeabi
Processor cores: 8
Processer: Qualcomm® Snapdragon™ 685 Octa-Core
CPU hardware: QTI SM6225
GPU, OpenGL ES version: 3.2
GPU, Vulkan version: 1.1.0
GPU: Qualcomm® Adreno™ 610
Board: bengal