Commit 8395 does not install database #204
-
|
Hi, Despite the improvements the files get installed but not the database. Enrique |
Beta Was this translation helpful? Give feedback.
Replies: 25 comments 11 replies
-
|
Hello Enrique, The changes committed yesterday were just some minor fixes that happened in a general sweep of the code. The new installer will be loaded up later today I hope. I will let you know when, and it would be great if you could test again. Tim |
Beta Was this translation helpful? Give feedback.
-
|
The new installer is now in the master branch. I would really appreciate it if you could test on your system. Thanks |
Beta Was this translation helpful? Give feedback.
-
|
Hello Tim. It gets to the database credentials, but it will accept the data. Tried repeatedly. Attachments might help. |
Beta Was this translation helpful? Give feedback.
-
|
I clarify: it will not accept data |
Beta Was this translation helpful? Give feedback.
-
|
Also images are diproportionatelly large and disturbs format for data to be eneterd and it is not what goes where. |
Beta Was this translation helpful? Give feedback.
-
|
It looks like the css isn't applying. Can you try ctrl-f5 in the browser to force a css reload. Tim |
Beta Was this translation helpful? Give feedback.
-
|
Yes it did loas the correct css and the procedure went through, but it loaded only 57 tables of the database ínstead of 175. |
Beta Was this translation helpful? Give feedback.
-
|
Not it will perform upgrade to a 4.15.2 database. It gets stuck at steps 5,6,7. |
Beta Was this translation helpful? Give feedback.
-
|
What was the last table it created? It creates them in alphabetic order |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
I have just pushed two files Can you try downloading them and trying again? Tim |
Beta Was this translation helpful? Give feedback.
-
|
It only improved installing 60 tablea and the last one is “modules”. Enrique |
Beta Was this translation helpful? Give feedback.
-
|
I also the notice of the 5,6,7 steps to go attached above. |
Beta Was this translation helpful? Give feedback.
-
|
That's very strange as the 60th table is labelfields. Did you get any error message? |
Beta Was this translation helpful? Give feedback.
-
|
No error message. Would you like a snapshot of tables? |
Beta Was this translation helpful? Give feedback.
-
|
Yes please. Are you deleting the database between attempts? |
Beta Was this translation helpful? Give feedback.
-
|
I was emptying the database. I will delete and rey again. We are 6 hours earlier in Costa Rica. I will be available tomorrow in case you will need further testimg. |
Beta Was this translation helpful? Give feedback.
-
|
Success! I comment tomorrow on how it is working. |
Beta Was this translation helpful? Give feedback.
-
|
Glad it now works for you. I ran the installer again with everything (web server/mysql/PHP) set on their most severe settings. Found 3 more errors that I have now fixed and uploaded |
Beta Was this translation helpful? Give feedback.
-
|
It is very useful. I am a bit confused that you are getting the database
upgrade screen. Someone else got that. Can you look in your config table.
You should have a record where confname='DBUpdateNumber'. If you do, then
what is the value of confvalue field? It should be 8
Thanks
Tim
…On Sat, 26 Oct 2024 at 16:39, efeoli ***@***.***> wrote:
Hello Tim,
If useful for you I am listing details of what I found exploring the
latest commit.
The version that gets installed is 4.15.1 and not 4.15.2
The very useful tab for”WO Items ready to produce” under manufacturing, is
not present.
With latest fixes to the installer the database upgrade screen shows up
for importing data from prior version, but it gets stuck at steps 5,6,7 as
per screenshot above.
Reports are uploaded but not shown in the main menu.
Otherwise, everthing runs fine under PHP 8.3, which is a tremedous
advancement and the many improvements are excellent. I wonder if what
pointed out may be improved?
Enrique
—
Reply to this email directly, view it on GitHub
<#204 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAAL6LHWFS2SEEELPAWW3ADZ5PATZAVCNFSM6AAAAABQU6JYICVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMBWGEZTSNI>
.
You are receiving this because you modified the open/close state.Message
ID: ***@***.***
com>
--
www.weberpafrica.com
@TimSchofield2
Blog: https://kwamoja.home.blog/
|
Beta Was this translation helpful? Give feedback.
-
|
Ah, it should be 7
Tim
On Sat, 26 Oct 2024 at 17:15, Tim Schofield ***@***.***>
wrote:
… It is very useful. I am a bit confused that you are getting the database
upgrade screen. Someone else got that. Can you look in your config table.
You should have a record where confname='DBUpdateNumber'. If you do, then
what is the value of confvalue field? It should be 8
Thanks
Tim
On Sat, 26 Oct 2024 at 16:39, efeoli ***@***.***> wrote:
> Hello Tim,
> If useful for you I am listing details of what I found exploring the
> latest commit.
>
> The version that gets installed is 4.15.1 and not 4.15.2
>
> The very useful tab for”WO Items ready to produce” under manufacturing,
> is not present.
>
> With latest fixes to the installer the database upgrade screen shows up
> for importing data from prior version, but it gets stuck at steps 5,6,7 as
> per screenshot above.
>
> Reports are uploaded but not shown in the main menu.
>
> Otherwise, everthing runs fine under PHP 8.3, which is a tremedous
> advancement and the many improvements are excellent. I wonder if what
> pointed out may be improved?
>
> Enrique
>
> —
> Reply to this email directly, view it on GitHub
> <#204 (reply in thread)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AAAL6LHWFS2SEEELPAWW3ADZ5PATZAVCNFSM6AAAAABQU6JYICVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMBWGEZTSNI>
> .
> You are receiving this because you modified the open/close state.Message
> ID: ***@***.***
> com>
>
--
www.weberpafrica.com
@TimSchofield2
Blog: https://kwamoja.home.blog/
--
www.weberpafrica.com
@TimSchofield2
Blog: https://kwamoja.home.blog/
|
Beta Was this translation helpful? Give feedback.
-
|
Try changing it to 7 see what happens then.
Tim
…On Sat, 26 Oct 2024 at 17:43, efeoli ***@***.***> wrote:
Should I change to 7 and try to import the prior data?
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you modified the open/close state.Message ID: ***@***.***>
--
www.weberpafrica.com
@TimSchofield2
Blog: https://kwamoja.home.blog/
|
Beta Was this translation helpful? Give feedback.
-
|
Don't worry about the version number, I will update that closer to release
date. I am confused about the WO ready to produce functionality you
mention. Was this on older versions?
…On Sat, 26 Oct 2024 at 18:38, efeoli ***@***.***> wrote:
What happens is the update screen gets activated, but this time the
upgrade runs satisfactorilly and completes 9 upgrades. However the versión
is still 4.15.1 and the WO ready to produce tab still is absent.
—
Reply to this email directly, view it on GitHub
<#204 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAAL6LC5C2OUMZGAZ4KITATZ5POT5AVCNFSM6AAAAABQU6JYICVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMBWGIYTANQ>
.
You are receiving this because you modified the open/close state.Message
ID: ***@***.***
com>
--
www.weberpafrica.com
@TimSchofield2
Blog: https://kwamoja.home.blog/
|
Beta Was this translation helpful? Give feedback.
-
|
Found it, have uploaded install/demo.sql install/sql/menuitems.sql files
…On Sat, 26 Oct 2024 at 19:26, efeoli ***@***.***> wrote:
Yes quite useful just above MRP tab, helps complete materials inventory in
order to proceed with production of work order.
—
Reply to this email directly, view it on GitHub
<#204 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAAL6LGGHQ3SAPUFZKULHLLZ5PUH7AVCNFSM6AAAAABQU6JYICVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMBWGIZTOOA>
.
You are receiving this because you modified the open/close state.Message
ID: ***@***.***
com>
--
www.weberpafrica.com
@TimSchofield2
Blog: https://kwamoja.home.blog/
|
Beta Was this translation helpful? Give feedback.
-
|
Hi, it's late here now, I will look at this in the morning
Thanks
Tim
…On Sat, 26 Oct 2024 at 21:39, efeoli ***@***.***> wrote:
Screenshot.2024-10-26.at.15-22-48.png (view on web)
<https://github.com/user-attachments/assets/1a2708fd-35d8-45a5-9b07-8a05c1e77548>
—
Reply to this email directly, view it on GitHub
<#204 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAAL6LGOTAGUVNJAMRK2OJ3Z5QDZFAVCNFSM6AAAAABQU6JYICVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMBWGMYTQNA>
.
You are receiving this because you modified the open/close state.Message
ID: ***@***.***
com>
--
www.weberpafrica.com
@TimSchofield2
Blog: https://kwamoja.home.blog/
|
Beta Was this translation helpful? Give feedback.






Yes please.
I ran the installer with mysql mode set as STRICT_TRANS_TABLES and it threw a couple of errors that I have corrected and pushed.
Are you deleting the database between attempts?