Validate shape cutout and extrusion inputs

src/setups/extrude_geometry.jl

@@ -87,6 +87,14 @@ shape = extrude_geometry(shape; direction, particle_spacing=0.1, n_extrude=4, de
 function extrude_geometry(geometry; particle_spacing=-1, direction, n_extrude::Integer,
                           velocity=zeros(length(direction)), place_on_shell=false,
                           mass=nothing, density=nothing, pressure=0.0)
+    if norm(direction) < eps()
+        throw(ArgumentError("`direction` needs to be non-zero"))
+    end
+
+    if n_extrude < 1
+        throw(ArgumentError("`n_extrude` needs to be positive"))
+    end
+
     direction_ = normalize(direction)
     NDIMS = length(direction_)
 
@@ -105,6 +113,11 @@ function extrude_geometry(geometry; particle_spacing=-1, direction, n_extrude::I
 
     face_coords = sample_plane(geometry, particle_spacing; place_on_shell)
 
+    if size(face_coords, 1) != NDIMS
+        throw(ArgumentError("`direction` must be of length $(size(face_coords, 1)) " *
+                            "for the sampled geometry"))
+    end
+
     coords = (face_coords .+ i * particle_spacing * direction_ for i in 0:(n_extrude - 1))
 
     # In this context, `stack` is faster than `hcat(coords...)`
@@ -235,6 +248,10 @@ end
 
 function shift_plane_corners(plane_points::NTuple{2}, direction, particle_spacing,
                              place_on_shell)
+    if length(direction) != 2
+        throw(ArgumentError("`direction` must be 2D when extruding 2D points"))
+    end
+
     # With `place_on_shell`, particles need to be AT the min coordinates and not half a particle
     # spacing away from it.
     (place_on_shell) && (return plane_points)
@@ -254,6 +271,10 @@ end
 
 function shift_plane_corners(plane_points::NTuple{3}, direction, particle_spacing,
                              place_on_shell)
+    if length(direction) != 3
+        throw(ArgumentError("`direction` must be 3D when extruding 3D points"))
+    end
+
     # With `place_on_shell`, particles need to be AT the min coordinates and not half a particle
     # spacing away from it.
     (place_on_shell) && (return plane_points)

src/setups/sphere_shape.jl

@@ -114,9 +114,20 @@ function SphereShape(particle_spacing, radius, center_position, density;
     cutout_min_ = collect(cutout_min)
     cutout_max_ = collect(cutout_max)
 
+    has_cutout = length(cutout_min_) != length(cutout_max_) ||
+                 norm(cutout_max_ - cutout_min_) > eps()
+
+    if has_cutout && (length(cutout_min_) != NDIMS || length(cutout_max_) != NDIMS)
+        throw(ArgumentError("`cutout_min` and `cutout_max` must be of length $NDIMS " *
+                            "for a $(NDIMS)D problem"))
+    end
+
+    if has_cutout && any(cutout_min_ .> cutout_max_)
+        throw(ArgumentError("`cutout_min` must be smaller than or equal to `cutout_max`"))
+    end
+
     # Remove particles in cutout
     # TODO This should consider the particle radius as well
-    has_cutout = norm(cutout_max_ - cutout_min_) > eps()
     function in_cutout(particle)
         return has_cutout &&
                all(cutout_min_ .<= view(coordinates, :, particle) .<= cutout_max_)

test/setups/extrude_geometry.jl

@@ -47,6 +47,24 @@
 
         @test shape.coordinates ≈ expected_coords
     end
+
+    @testset verbose=true "Errors" begin
+        point1 = [0.0, 0.0]
+        point2 = [0.0, 1.0]
+
+        @test_throws ArgumentError extrude_geometry((point1, point2);
+                                                    direction=[0.0, 0.0],
+                                                    particle_spacing=0.1,
+                                                    n_extrude=1, density=1.0)
+        @test_throws ArgumentError extrude_geometry((point1, point2);
+                                                    direction=[1.0, 0.0],
+                                                    particle_spacing=0.1,
+                                                    n_extrude=0, density=1.0)
+        @test_throws ArgumentError extrude_geometry((point1, point2);
+                                                    direction=[0.0, 0.0, 1.0],
+                                                    particle_spacing=0.1,
+                                                    n_extrude=1, density=1.0)
+    end
 end
 
 # 3D

test/setups/sphere_shape.jl

@@ -79,6 +79,15 @@
         end
     end
 
+    @testset verbose=true "Errors" begin
+        @test_throws ArgumentError SphereShape(0.1, 0.5, (0.0, 0.0), 1000.0;
+                                              cutout_min=(0.2, 0.0),
+                                              cutout_max=(0.1, 0.1))
+        @test_throws ArgumentError SphereShape(0.1, 0.5, (0.0, 0.0, 0.0),
+                                              1000.0; cutout_min=(0.0, 0.0),
+                                              cutout_max=(0.1, 0.1))
+    end
+
     @testset verbose=true "SphereShape 3D" begin
         shape_names = [
             "1-particle VoxelSphere",