oled_12864_driver

OLED Display

• LCD CS     ---------------- D42
• LCD RES   ---------------- D43
• LCD CD     ---------------- D44
• LCD SCK   ---------------- D30
• LCD MOSI ---------------- D35

How to use the driver

1. Download this project oled_12864_driver.ino. Learn how to download single file from GitHub https://github.com/uArm-Developer/SwiftProForArduino/wiki/How-to-download-single-file-from-GitHub

2. Configure Arduino IDE，select the board as "Arduino/Genuino Mega or Mega 2560", Select the COM that allocated randomly by your computer, please refer to the following picture:

    

3. Open the "Manage Libraries".

    

4. Install u8glib.

    

5. Press the "Upload" button to upload firmware.

    

6. Check the Display Screen.

    

Note：When uArm Controller is connected with a computer, please press the "Reset" button.