Main ❯ Other equipment ❯ Device specification: F4105-BU
 |
 |
|---|---|
| www.unavlab.com support@unavlab.com |
F4105-BU Release unit Device specification |
- Easy to use
- Small size and weight
- Up to 2 months on one charge1
- Auto-float function when batteries are low
- Maintenance-free, sealed housing
A simple and miniature solution for ensuring the removal of various bottom equipment installed for a long period (up to two months). The device consists of an actuator with a built-in LiFePO4 battery. Upon receiving a command from the control device or upon detecting a low battery charge, a screw actuator is activated, ensuring reliable uncoupling from the anchor. A hydroacoustic awakener F4105-AU is used as a control device.
| PARAMETER | VALUE |
|---|---|
| DIMENSTION (Ф х h) | 77 x 220 mm |
| WEIGHT (dry) | 1.25 kg |
| CABLE LENGTH (not less) | 0.3 m |
| WORKING TIME BEFORE DISENGAGEMENT | 90 sec |
| BUILT-IN BATTERY TYPE | LiFePO4 |
| BUILT-IN BATTERY CAPACITY | 52 W·h |
| BATTERY LIFE1 | up to 60 days |
| MAXIMUM NUMBER OF OPERATIONS1 (during battery life) |
50 |
| WORKING TEMPERATURE RANGE | 0 .. 30 °С |
| DEPTH RATING | 100 m |
| BUILT-IN BATTERY CHARGING | From the AC network, using the supplied charger |
| № Pin | I/O | Function |
|---|---|---|
| 1 | O | Power supply for the control device +5.2 .. +7.3 V |
| 2 | - | NC |
| 3 | I | СHARGE +7.5 V, 1 А max |
| 4 | I | ACT logic "1" LVTTL and TTL |
| 5 | - | Common |
1 With a fully charged battery and using the Hydroacoustic Awakener F4105-AU as a control device F4105-AU